General Electric Dryer Knobs
Popular General Electric Dryer Knobs
General Electric Dryer Timer Knob
PartSelect Number PS11736611
Manufacturer Part Number WE01X24552
This is a timer control knob for your dryer. The timer is the main part within dryers that is responsible for controlling when the different processes of the drying cycle occur, and it is important that the knob that controls it works properly, too. If you are having difficulty selecting the correct dryer function and mode, this knob may be broken and need to be replaced. To replace this knob, simply pull the old one away and off, and then carefully push the new one on in its place. This OEM knob is sold individually, and does not come with any other parts.
Fixes these symptoms
- Timer Not Working
- Won’t Start
- See more...
Installation Instructions
Jerry from ST JOHNS, FL
Dryer timer very hard to turn resulting in a stripped knob
My GE electric dryer timer became very difficult to turn and eventually stripped the knob. First I unplugged the dryer. Then removed the upper back panel exposing the timer. There is only one small allen screw plus built in slots holding the timer. There are many wires connected to the timer so I took a picture just in case. I removed the timer and let it hang by the wires. I then pulled one wire at a time and reattached it to the new timer. All went well and the dryer works like it was new again. The most difficult thing was replacing the small screw holding the timer. I then replaced the back panel and attached the new knob. There’s no need for a professional repair person for this problem. From start to finish was less than 30 minutes.
Read more...
General Electric Dryer Timer Knob
PartSelect Number PS1482196
Manufacturer Part Number WE1M652
This OEM Timer Knob is a white plastic knob which can be easily installed onto your machine's timer rod, in order to control the timer. If the part breaks off, it should be replaced. Refer to your user manual and model number to see if this part is right for you. It is a three-inch-diameter part that accepts a D-shaped shaft. To replace your faulty knob, simply pull the existing knob straight off the shaft and install the replacement back onto the shaft. No tools are required. This item is sold individually and is not part of a set. The timer knob contains the insert as well as the knob itself.
Fixes these symptoms
- Timer Not Working
- Won’t Start
- See more...
Installation Instructions
McKinley from Meraux, LA
the knob broke and my daughter tried turning the end of the knob with a pliers which broke the end which disabled the timer.
I unscrewed the back panel took out the broken timer replaced it with new timer put on the new knob and screwed the panel back on.
Read more...
Your Price
$14.41
In Stock
General Electric Dryer Selector Knob with Clip
I created and printed a label on my computer for use with the time selector dial, which must be set at or beyond 10 minutes, before turning the START knob.
I made a label that says "Minimum" with a red arrow that points past the 10 minute setting on the time selector dial.
My teenage daughter was not setting the time selector dial, to a point past 10 minutes. When she turned the START knob, the dryer would not come on, because the time selector dial was not set past the 10 minute setting.
My daughter had continually twisted the START knob until it broke. I am hoping she will be able to see the large printed label I put on the dryer near the time selector, saying "Minimum" with a large red arrow pointing past 10 minutes.
I am very pleased that I was quickly able to find the exact matching START knob for my dryer and the exact same color, from PartSelect.Com Read more...
PartSelect Number PS271094
Manufacturer Part Number WH1X2721
The selector knob is what you use to start the dryer. This replacement knob comes with a retaining clip. This is a very easy repair, the only tool you may need is a pair of needle nose pliers. Remove the existing knob by pulling it off, making sure to remove the retaining clip as well. Line up the new knob with the D-shaped shaft and slide it into place.
Fixes these symptoms
- Noisy
- Will Not Start
- Won’t Start
- See more...
Installation Instructions
SAM from ROCK HILL, NY
Replaced broken START knob on dryer.
Slid off the old START knob, then pushed on the new START knob.I created and printed a label on my computer for use with the time selector dial, which must be set at or beyond 10 minutes, before turning the START knob.
I made a label that says "Minimum" with a red arrow that points past the 10 minute setting on the time selector dial.
My teenage daughter was not setting the time selector dial, to a point past 10 minutes. When she turned the START knob, the dryer would not come on, because the time selector dial was not set past the 10 minute setting.
My daughter had continually twisted the START knob until it broke. I am hoping she will be able to see the large printed label I put on the dryer near the time selector, saying "Minimum" with a large red arrow pointing past 10 minutes.
I am very pleased that I was quickly able to find the exact matching START knob for my dryer and the exact same color, from PartSelect.Com Read more...
General Electric Dryer KNOB
PartSelect Number PS11725223
Manufacturer Part Number WE01X21167
This is a knob designed for use with washing machines. This knob is used to select, adjust, and change the various settings of your washer cycle. This knob is made of plastic with a chromated finish, and replaces the current knob your washer if it is broken or missing. Replacing this knob is easy and only requires you to carefully pull the old one off its post, and push this new one on. This knob is sold as an individual OEM part and does not come with any other parts.
Your Price
$28.89
In Stock
General Electric Dryer Control Knob and Clip - White
PartSelect Number PS9493075
Manufacturer Part Number WE01X20378
This set (Knob and Clip Assembly, Control Knob, Dryer Control Knob) allows you to replace the knob on your timer if it is damaged or missing. The plastic knob can break around its shaft, or the retainer clip inside the knob can fall out and no longer stay securely on the control shaft. If your knob no longer stays in place, it’s time to place it. The knob is attached to the d-shaped shaft of the control mechanism. This model has a 2 inch diameter, 1-1/14 inch depth, and comes in white plastic.
Fixes these symptoms
- Will Not Start
- Won’t Start
- See more...
Installation Instructions
Daniel from Chantilly, VA
Knob broke
Pulled off old knob and aligned new knob and pushed on. Videos sent with order was very clear and great customer service tool.
Read more...
Your Price
$38.77
In Stock
General Electric Dryer Timer Knob
PartSelect Number PS1482197
Manufacturer Part Number WE1M654
This timer knob is used to set the dryer cycle by advancing the timer. The plastic can become brittle with age and crack where it attaches to the timer shaft. You will need to replace this part if it slips off the shaft and cannot advance the timer. If it constantly falls off and will not stay on the shaft by itself, it may be cracked or broken and need to be replaced. This model is roughly 3 inches in diameter and made of white plastic. Sold individually.
Fixes these symptoms
- Timer Not Working
- Will Not Start
- Won’t Start
- See more...
Installation Instructions
Jeffery from Waterford, MI
Timer knob cracked twice. Found out the timer switch was bad.
Removed the 3 knobs. They just pull off. Removed 6 screws on the back side of the control panel. The front (plastic panel then just separates from the back). Then look at how the switch is mounted on the plastic panel. There should be 2 small pieces of plastic that holds it in. Carefully twist the switch in the appropriate direction so it comes free. Before you remove any wires from the old switch remember what colors go where ! I used needle nose pliers to remove the connections from the switch. Make the new connections, mount the switch, put the screws back in the panel. BEFORE YOU DO ANYTHING. UNPLUG THE ELECTRICAL CORD !!!
Read more...
General Electric Dryer Knob, Gray
2. Tilt top panel forward and disengage
3. Swapped wiring one by one from old timer to new timer
4. Reinstall
The new timer worked so well that even the old, broken knobs could turn it. But I replaced the knobs anyway.
Customer service was great in helping me verify that this timer would work on this dryer (my model number was not listed on the website). Read more...
PartSelect Number PS2370714
Manufacturer Part Number WH01X10462
This part is a replacement timer knob for your dryer. The knob fits onto a D-shaped shaft. To replace the knob, line up the back opening with the shaft and slide it in place. Make sure the dryer is turned off before beginning this repair.
Fixes these symptoms
- Timer Not Working
- See more...
Installation Instructions
Bruce from South San Francisco, CA
Frozen timer
1. Remove three screws from back of dryer2. Tilt top panel forward and disengage
3. Swapped wiring one by one from old timer to new timer
4. Reinstall
The new timer worked so well that even the old, broken knobs could turn it. But I replaced the knobs anyway.
Customer service was great in helping me verify that this timer would work on this dryer (my model number was not listed on the website). Read more...
General Electric Dryer Control Knob - Grey
PartSelect Number PS8769914
Manufacturer Part Number WE01X20380
This knob accepts a D shaped shaft. Sold individually. This control knob is for dryers.
Control knob lets you control cycle settings.
Remove the knob by pulling it straight off its post.
Installation Instructions
Matthew from CHESAPEAKE, VA
Nipple on timer stripped, knob would not turn
Replace time and labeled each wire I disconnected
Read more...
Your Price
$13.02
In Stock
General Electric Dryer Knob and Clip
PartSelect Number PS1482289
Manufacturer Part Number WH01X10313
This knob accepts a D-shaped shaft.
Installation Instructions
Terri from DADEVILLE, AL
broken knob that turned too freely and did nothing
I wasn't sure that a new knob/clip would fix problem b/c shaft wouldn't turn with pliers. But knob was so inexpensive I wanted to try it first. I received the new knob/clip and the dryer worked perfectly; the knob had been broken for a year before it had quit working entirely. Don't let someone tell you that you need a whole new timer before you try the new knob/clip. Still working perfectly and I'm so pleased. And my part arrived within 2 days-wonderful!
Read more...
General Electric Dryer Timer Knob - White
PartSelect Number PS8769912
Manufacturer Part Number WE01X20374
This knob accepts a D-shaped shaft. Sold individually.
Fixes these symptoms
- Timer Not Working
- See more...
Installation Instructions
Todd from LONG BEACH, CA
replace timer
took back off dryer, removed one screw with Torx wrench securing timer, removed one wire at a time from old timer placing on new timer to ensure correct wiring, put timer back in place tightening the one screw to secure. Took less than 10 min. Works perfectly and I saved myself $200 repair bill from Sears, the total for buying my parts at this site about $80. Well worth doing it yourself.
Read more...
Related General Electric Dryer Parts
- All General Electric Dryer parts
- General Electric Dryer Bearings
- General Electric Dryer Belts
- General Electric Dryer Brackets and Flanges
- General Electric Dryer Caps and Lids
- General Electric Dryer Circuit Boards and Touch Pads
- General Electric Dryer Drums and Tubs
- General Electric Dryer Elements and Burners
- General Electric Dryer Filters
- General Electric Dryer Handles
- General Electric Dryer Hardware
- General Electric Dryer Latches
- General Electric Dryer Legs and Feet
- General Electric Dryer Motors
- General Electric Dryer Panels
- General Electric Dryer Seals and Gaskets
- General Electric Dryer Sensors
- General Electric Dryer Switches
- General Electric Dryer Thermostats
- General Electric Dryer Timers
- General Electric Dryer Valves
- General Electric Dryer Wheels and Rollers