Reciprocating Saw Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Reciprocating Saw Parts
Your Price
$11.22
In Stock
Reciprocating Saw Carbon Brush Set
PartSelect Number PS10156649
Manufacturer Part Number CB303
This set of two carbon brushes is a genuine Makita replacement part, packaged in an official Makita retail box. Each brush includes wire leads and attached brush springs, and is designed to restore optimal performance in compatible Makita tools. Carbon brushes are among the most commonly replaced components in power tools, as they gradually wear down through friction and regular use. Worn brushes can lead to intermittent motor function, reduced power, or diminished electric braking. Replacing them can resolve these issues and restore proper motor performance. Signs of wear include brushes worn near the wire lead, or those that are cracked, pitted, or burned. When replacing carbon brushes, it’s also important to inspect the armature for any signs of damage, such as burns or cracks, which may indicate a more serious motor issue.
Your Price
$22.86
In Stock
Reciprocating Saw Power Cord
PartSelect Number PS10169875
Manufacturer Part Number 330072-98
Length: 8'
Gauge: 18
Wires: 2
Type: Bare Wire
This cord is a genuine DeWalt replacement part. This cord is compatible with the list of models below. This part is made for double insulated tools It is a two wire cord with two prongs and does not need a ground wire. The cord is sold individually. Installation of this part requires the new cord wires to go correctly into wire terminals also routing the cord and wires in the right path can help avoid pinching when the tool case (Plate) is put back into place.
Your Price
$16.02
In Stock
Reciprocating Saw Shoe Assembly
PartSelect Number PS10132586
Manufacturer Part Number 45-16-0645
This is a genuine Milwaukee replacement part. It is sold individually for the Milwaukee Sawzalls listed below. The Shoe Assembly helps guide the blade where you want to cut. It is adjustable by pulling down on the 31-52-0090 Shoe Release Lever, for use of longer or shorter blades. The foot pivots for cutting angles. The saw should not be used without this part or it could damage the saw. Part is easily removed and installed with the lever release.
Your Price
$5.95
In Stock
Reciprocating Saw Cord Protector
PartSelect Number PS17061542
Manufacturer Part Number N918736
This cord protector is a genuine DeWalt replacement part and is sold individually. Cord Protectors are designed to slide onto your cord and fit securely at the end, where it's firm rubber will protect the base of the cord from getting bent and pinched, which can expose the wires and become a safety hazard.
Your Price
$5.16
In Stock
Reciprocating Saw Shoe Pin
PartSelect Number PS10131365
Manufacturer Part Number 44-60-1635
This is a genuine OEM sourced replacement part designed for use with Milwaukee sawzall reciprocating saws. This shoe pin secures the shoe retainer. It is made of metal and it is sold individually. To complete this repair you would need a screwdriver and pliers.
Your Price
$6.15
In Stock
Reciprocating Saw Carbon Brush
PartSelect Number PS10122113
Manufacturer Part Number 22-16-0275
Genuine Milwaukee replacement part Includes 1 Carbon Brush sold individually. Please go to the schematic listings for your tool to find the brush assembly parts compatible with this carbon brush and your tool. This carbon brush will fit a wide variety of Milwaukee tools. • Worn brushes are frequently the cause of a poorly running motor. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.
Your Price
$9.01
In Stock
Reciprocating Saw Shoe
PartSelect Number PS10140526
Manufacturer Part Number 163451-9
Genuine Makita replacement part, this item is sold individually. This Shoe is used to place against the material your are cutting It makes it much easier to make the straight or other cuts you desire. The shoe is also adjustable so you can the set the blade stroke depth of cut that you want.
Your Price
$6.15
In Stock
Reciprocating Saw Brush Holder Assembly
PartSelect Number PS10122311
Manufacturer Part Number 22-20-0535
This is a genuine Milwaukee replacement part, it is sold individually. 2 are needed for the tools shown below. It includes the Brush and Brush Holder. It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
Your Price
$4.64
In Stock
Reciprocating Saw Strain Reliever
PartSelect Number PS12499955
Manufacturer Part Number 901266
This is a genuine Porter Cable replacement part, it is sold individually. A Cord Strain Reliever is used on most all power tools. It purpose is to reduce the bending of the cord as it comes out of the housing, which otherwise would cause the cord to crack and wear.
Your Price
$5.37
In Stock
Reciprocating Saw Shoe Release Lever
PartSelect Number PS10126092
Manufacturer Part Number 31-52-0090
Genuine Milwaukee replacement part, this item is sold individually. The shoe can be adjusted forward or backward to take advantage of the unused portion of the blade or for special jobs requiring low blade clearance. To adjust the shoe, pull out the shoe release lever 1/4 turn. Slide the shoe forward or backward to the desired position. After adjusting the shoe, slowly pull the trigger to be sure the blade always extends beyond the shoe and your work throughout the stroke.
Related Reciprocating Saw Parts
- Reciprocating Saw Hardware
- Reciprocating Saw Bearings
- Reciprocating Saw Brushes
- Reciprocating Saw Springs and Shock Absorbers
- Reciprocating Saw Power Cords
- Reciprocating Saw Caps and Lids
- Reciprocating Saw Switches
- Reciprocating Saw Seals and Gaskets
- Reciprocating Saw Motors
- Reciprocating Saw Latches
- Reciprocating Saw Drawers and Glides
- Reciprocating Saw Transmissions and Clutches
- Reciprocating Saw Engines
- Reciprocating Saw Handles
- Reciprocating Saw Wire Plugs and Connectors
- Reciprocating Saw Knobs
- Reciprocating Saw Gears
Popular Reciprocating Saw Models
Below are the most popular Reciprocating Saw models we have. Enter your model number in the search box to find your model.
- JR3070CT Reciprocating Saw
- JR3000V
- 6527 Sawzall
- 6527 Sawzall
- 6527 Sawzall
- 6527 Sawzall
- 6527 Super Sawzall
- 6527 Super Sawzall
- 6527 Sawzall
- 6527 Super Sawzall
- 6527 Sawzall
- 6527 Sawzall
- 6527 Sawzall
- 6527 Super Sawzall
- 6527 Sawzall
- 6527 Sawzall
- 6527 Sawzall
- 6527 Super Sawzall
- 6527 Sawzall
- 530 Variable Speed Dual Action Reciprocating Saw