6527 (SER 774F) Milwaukee Reciprocating Saw - Overview

Genuine Milwaukee replacement part Includes 1 Carbon Brush with wire lead and brush spring attached. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • 2 Required for a set. • New brushes can restore a motor's electric braking Carbon motor brushes are one of the mos...Read moret commonly replaced power tool components. • Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. • Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. • A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. • When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

This Milwaukee Quik-Lok® cord is a genuine OEM replacement part, it is sold individually. This is a three wire grounded 8 foot cord for fast field replacement of a damaged cord. Made of premium grade Hi-Flex wire the cord is quickly removed and attached to Milwaukee tools with the Quik-Lok® cord feature. To change a damaged cord simply...Read more turn the collar at the top of the cord counter clockwise to loosen the nut and pull down on the cord to remove. To re-attach a new cord, line up the pins in the end of the tool with the pin receptacles in the end of the cord, push together and turn the collar clockwise to lock in place. The Cord has a 5-15P NEMA type plug.

Genuine Milwaukee replacement part, this item is sold individually. The purpose of the Brush Retaining Screw or Brush Cap, is to secure the brushes and keep the brush tight against the armature in the housings of the tool models shown below.

This is a genuine OEM replacement part. This steel bearing is used in a variety of Milwaukee handheld power tools including rotary hammers and Sawzalls. Ball bearings serve to separate and buffer moving parts. They also assist with directional stability. They are therefore a high-wear part that is replaced regularly. This item is sold individually. Retaining rings and spacers sold separately.

This is an authentic manufacturer sourced replacement brush holder assembly that is utilized on Milwaukee power tools. This part is designed to secure two carbon brushes around the armature to provide stable and safe contact. Please note carbon brushes are sold separately. One durable plastic brush holder assembly is included per order.

This is a genuine Milwaukee replacement part that is intended to be used with sawzall reciprocating saws. This item is used to cover the front port in the gearcase assembly. A screwdriver and pliers may be needed to install this item and it is priced as a single part.

This is a Genuine OEM Milwaukee 1/4" replacement Blade Clamp for use with Sawzall Reciprocating Saws. The purpose of this Clamp is to fasten the saw blade to the shaft. This part is made out of metal and it is sold individually. Please note Blade Clamp Screw is sold Separately.