Toro Parts

Height Guide Assembly Metric – Part Number: 144-4805

Your Price

$19.65

PartSelect Number PS16666196

Manufacturer Part Number 144-4805

Discover the power of top-quality, genuine Toro parts with this Height Guide Assembly. A perfect match for your Toro equipment, it is specifically designed to provide optimal functionality for a heightened equipment performance. Its precise metric measurements ensure a seamless fit, resulting in increased performance and efficiency. Made with the exceptional craftsmanship Toro is known for, it assures long-lasting durability and heightened wear and tear resistance making it a wise investment for those looking to enhance their equipment's longevity. Invest in Toro's Height Guide Assembly today for a more efficient and effective performance every time.

Your Price

$12.87

Toro Belt Cover

PartSelect Number PS16666009

Manufacturer Part Number 144-1906

Discover the genuine OEM Toro Cover-Belt, perfect for keeping your Toro equipment at optimum running conditions. This Cover-Belt is designed to offer outstanding protection to your equipment's belt system, safeguarding your investment and ensuring durability. Crafted with precision and expertise by Toro, it assures compatibility and a tailored fit for your machine. This high-quality part is built to withstand wear and tear, promising long-lasting performance. Trust Toro's signature design and manufacturing for consistent efficiency. Commit to quality and reliability with Toro's Cover-Belt.

Your Price

$18.38

Toro Buttonfeed Bump

PartSelect Number PS16666051

Manufacturer Part Number 144-4105

Introducing a genuine Button-Feed, Bump from the trusted brand, Toro. This OEM part is essential for enhancing the performance and longevity of your appliances. As a unique Button-Feed, Bump, it provides optimal functioning paired with ultimate efficiency. Crafted to perfection by Toro, this part proves itself through the seamless operation and durability it delivers. Evoking consistency and reliability, it assures you superior quality. Upgrade your appliance for an elevated experience with this Toro part today.

Your Price

$7.88

Toro Engine Oil Seal

★★★★★

2 Reviews

PartSelect Number PS9151828

Manufacturer Part Number 795387

This OEM Seal-Oil (PTO Side), also called the Oil Seal, is a Black, Nitrile Rubber, 2/14 O.D., individually sold part which is installed using a Seal Puller. Customers rate the installation difficulty as Medium. This part provides a seal around the crank shaft and engine block. When installing onto the engine block around the crank shaft, use something that makes contact around the entire seal, like a large socket or pipe, and tap into place evenly, ensuring that the housing is clean and dry. If the part is broken, likely due to fatigue, there will be leaking oil, and this part should be replaced using the model number on the original part to confirm it is the right fit for your model.

Installation Instructions

rodney from MUSCATINE, IA

governor not working

Had to pull the engine off the rider mower. Drained the oil took shield off the flywheel. Set it upside down on a 5 gal bucket. Took a 7/16 hand wrench to remove governor lever from bottom of engine. Left it in its location. Pulled 10 1/2 " bolts. Split engine case. Found the old governor had broke into pieces. Had to use a magnet to remove all the pieces. Removed the small clip and removed gear. Lubed shaft slid new on put new clip on. Lined governor weights with center piece tapped it in place very lightly. Cleaned gasket flanges pulled the shaft seal. Used the old seal as a seal driver. When putting the cover back on make sure the seal dont roll out. Take a mini screwdriver and tuck it in around shaft. Put bolts back in and tighten like instructions Read more...

Lawn Mower Mulching Blade (22-In) – Part Number: 131-4547-03

Your Price

$21.52

Toro Lawn Mower Mulching Blade (22-in)

★★★★★

1 Review

PartSelect Number PS11804777

Manufacturer Part Number 131-4547-03

This is a genuine OEM replacement blade for use on Lawn Mowers. If the blade is too dull it will tear the grass instead of an even cut. A bent or damaged blade can cause serious damage or injuries. You can use this blade with the Recycler Cutting System to chop grass clippings into fine mulch particles and return them to the ground.

Discharge Deflector – Part Number: 138-7502

Your Price

$70.85

Toro Discharge Deflector

★★★★★

1 Review

PartSelect Number PS16665209

Manufacturer Part Number 138-7502

This discharge deflector shield is engineered to manage the flow of grass clippings and debris from the mower deck, promoting a cleaner cut and enhancing safety during operation. By directing discharged material away from the operator and surrounding areas, it helps reduce the risk of injury and keeps the mowing path clear. Constructed from durable materials for long-lasting performance, the shield is designed to fit select zero-turn riding lawnmowers, including specific models from the Exmark Quest E-Series (42") and S-Series (54"), as well as Toro TimeCutter and Titan MyRide lines. Installation involves securing the shield to the designated mounting points on the mower deck, ensuring proper alignment for effective discharge control.