Grinder Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Grinder Parts
Your Price
$5.19
In Stock
Grinder Carbon Brush
PartSelect Number PS10188358
Manufacturer Part Number N097696
Genuine Dewalt replacement part This brush is sold individually, 2 are needed for the tools shown below It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
Your Price
$8.03
In Stock
Grinder Hex Hole Flange
PartSelect Number PS10188627
Manufacturer Part Number N134467
This is an Original Manufacturer Sourced replacement part used on Dewalt Angle Grinders. This part is made out of Metal and it is Sold Individually. The purpose of this Hex Hole Flange Nut is to hold the Grinding Wheel to the Spindle Shaft. You would need Hex Wrench to secure this part.
Your Price
$13.44
In Stock
Grinder Carbon Brush Set
PartSelect Number PS10156653
Manufacturer Part Number CB340
Set of 2 Carbon Brushes with wire leads and brush springs attached. The set contains genuine Makita replacement parts, and comes packaged in a Makita retail box. rnThis brush set will fit the Makita tools listed at the bottom of the page.
• Worn brushes frequently are the cause behind a motor running poorly.
• Replacing brushes can fix a motor that’s operating intermittently.
• New brushes can restore a motor’s electric braking.
Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
Your Price
$24.51
In Stock
Grinder Cordset
PartSelect Number PS11929697
Manufacturer Part Number N353819
This is an original replacement part manufactured for use with DeWalt angle grinders. This two wire cord had a rubberized jacket, and the wires have crimped terminals to make installation easier. The cordset is available individually.
Your Price
$5.19
In Stock
Grinder Clamp Washer
PartSelect Number PS10188483
Manufacturer Part Number N115381
This is a Genuine Manufacturer Sourced replacement part used on Dewalt Angle Grinders. The purpose of this Clamp Washer is to provide support for the Grinding Wheel to the Spindle Shaft. This Clamp Washer is made out of Metal and it is Sold Individually. You would need Hex Wrench to replace this part.
Your Price
$10.85
In Stock
Grinder Brush
PartSelect Number PS10183735
Manufacturer Part Number 650916-01
Sold Individually This motor brush is for angle grinders.
The motor brush transfers electric current to the spinning armature in the motor.
Unplug the angle grinder before installing this part. Wear work gloves to protect your hands.
Your Price
$13.97
In Stock
Grinder Guard
PartSelect Number PS11929669
Manufacturer Part Number N306360
High quality guard that is specially manufactured for use with small angle grinders. It is an authentic OEM sourced item that helps to direct dust and trimmings away from the user while the grinder is being used as well as provide protection from the grinding disk. Please note this durable metal guard is sold individually.
Your Price
$9.86
In Stock
Grinder Side Handle
PartSelect Number PS11929734
Manufacturer Part Number N383283
This genuine manufacturer supplied replacement part is specially designed for Dewalt angle grinders. This handle is secured to the side of the tool providing user with a safe and comfortable grip for operating the tool. It is made from high quality plastic with a threaded metal shaft and it is sold individually.
Your Price
$6.40
On Order
Grinder Carbon Brush Set
PartSelect Number PS10156652
Manufacturer Part Number CB325
Genuine Makita replacement part. Set of 2 Carbon Brushes with wire lead attached. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.
Your Price
$8.14
In Stock
Grinder Brush
PartSelect Number PS12410247
Manufacturer Part Number 445861-25
(Sold Individually)
This motor brush is for grinders.
The motor brush transfers electric current to the spinning armature in the motor.
Unplug the grinder before installing this part. Wear work gloves to protect your hands.
Related Grinder Parts
- Grinder Hardware
- Grinder Caps and Lids
- Grinder Brushes
- Grinder Bearings
- Grinder Power Cords
- Grinder Handles
- Grinder Brackets and Flanges
- Grinder Switches
- Grinder Seals and Gaskets
- Grinder Springs and Shock Absorbers
- Grinder Latches
- Grinder Wire Plugs and Connectors
- Grinder Wheels and Rollers
- Grinder Knobs
- Grinder Dispensers
- Grinder Panels
- Grinder Fans and Blowers
- Grinder Transmissions and Clutches
- Grinder Exhausts
- Grinder Ducts and Vents
- Grinder Hoses and Tubes
- Grinder Filters
- Grinder Gears
- Grinder Hinges
- Grinder Valves
- Grinder Drums and Tubs
- Grinder Spindles
Popular Grinder Models
Below are the most popular Grinder models we have. Enter your model number in the search box to find your model.
- 51865 1 Hp Router Front Exhaust, Pattern Trim
- 51700 1/8" Straight Line Pencil Grinder
- DWE43116 4-1/2-5/6i 13a 9k Tr
- 3107G Grinder
- 3101G Grinder
- 301B Air Die Grinder
- 4103 Wilton 4103 Parts
- DWE4887N 1-1/2in Die Grinder
- DWE4887N 1-1/2in Die Grinder
- 66402 Precision Tool Post Grinder
- 43505 .4 Hp Extension Die Grinder Rear Exhaust, Governor-Controlled
- CSG15 Concrete Grinder
- DWE43113 4.5-6in 13a Trig Swi
- GWS850C Angle Grinder
- DWE4887 1-1/2in Die Grinder
- DWE4887 1-1/2in Die Grinder
- 52218 .4 HP Staight Line Die Grinder
- D28494G Large Angle Grinder
- DWE43140 6in 13a 1700mwo 9k S
- 52267 .5 HP Offset Die Grinder