DeWALT Grinder Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular DeWALT Grinder Parts
Your Price
$6.40
In Stock
DeWALT Grinder Carbon Brush
PartSelect Number PS10188358
Manufacturer Part Number N097696
Genuine Dewalt replacement part This brush is sold individually, 2 are needed for the tools shown below It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
Your Price
$9.52
In Stock
DeWALT Grinder Hex Hole Flange
PartSelect Number PS10188627
Manufacturer Part Number N134467
This is an Original Manufacturer Sourced replacement part used on Dewalt Angle Grinders. This part is made out of Metal and it is Sold Individually. The purpose of this Hex Hole Flange Nut is to hold the Grinding Wheel to the Spindle Shaft. You would need Hex Wrench to secure this part.
Your Price
$29.05
In Stock
DeWALT Grinder Cordset
PartSelect Number PS11929697
Manufacturer Part Number N353819
This is an original replacement part manufactured for use with DeWalt angle grinders. This two wire cord had a rubberized jacket, and the wires have crimped terminals to make installation easier. The cordset is available individually.
Your Price
$6.40
In Stock
DeWALT Grinder Clamp Washer
PartSelect Number PS10188483
Manufacturer Part Number N115381
This is a Genuine Manufacturer Sourced replacement part used on Dewalt Angle Grinders. The purpose of this Clamp Washer is to provide support for the Grinding Wheel to the Spindle Shaft. This Clamp Washer is made out of Metal and it is Sold Individually. You would need Hex Wrench to replace this part.
Your Price
$12.85
In Stock
DeWALT Grinder Brush
PartSelect Number PS10183735
Manufacturer Part Number 650916-01
Sold Individually This motor brush is for angle grinders.
The motor brush transfers electric current to the spinning armature in the motor.
Unplug the angle grinder before installing this part. Wear work gloves to protect your hands.
Your Price
$16.55
In Stock
DeWALT Grinder Guard
PartSelect Number PS11929669
Manufacturer Part Number N306360
High quality guard that is specially manufactured for use with small angle grinders. It is an authentic OEM sourced item that helps to direct dust and trimmings away from the user while the grinder is being used as well as provide protection from the grinding disk. Please note this durable metal guard is sold individually.
Your Price
$11.70
In Stock
DeWALT Grinder Side Handle
PartSelect Number PS11929734
Manufacturer Part Number N383283
This genuine manufacturer supplied replacement part is specially designed for Dewalt angle grinders. This handle is secured to the side of the tool providing user with a safe and comfortable grip for operating the tool. It is made from high quality plastic with a threaded metal shaft and it is sold individually.
Your Price
$12.14
In Stock
DeWALT Grinder Brush
PartSelect Number PS12410247
Manufacturer Part Number 445861-25
(Sold Individually)
This motor brush is for grinders.
The motor brush transfers electric current to the spinning armature in the motor.
Unplug the grinder before installing this part. Wear work gloves to protect your hands.
Your Price
$16.86
In Stock
DeWALT Grinder Carbon Brush With Wire Lead
PartSelect Number PS10171526
Manufacturer Part Number 392574-01
Genuine DeWalt replacement part Includes 1 Carbon Brush with wire lead attached. • Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
Your Price
$22.67
In Stock
DeWALT Grinder Flanged Hex Nut
PartSelect Number PS12533327
Manufacturer Part Number N484249
Meet your repair needs with the DeWALT Flanged Hex Nut. Designed with superior quality and precision, this flanged hex nut is integral to ensuring your tools function optimally. Whether you're an experienced professional or a DIY enthusiast, this hex nut is built to offer robustness and reliability. Its specialized features ensure seamless installation for a wide variety of tools. By choosing DeWALT, you get the reassurance of a trusted brand that is synonymous with high-performing, long-lasting components. Trust the DeWALT Flanged Hex Nut for your tool repair needs.
DeWALT Grinder Appliance Types
Popular DeWALT Grinder Models
Below are the most popular DeWALT Grinder models we have. Enter your model number in the search box to find your model.
- DWE43116 (Type 1) 4-1/2-5/6i 13a 9k Tr
- DWE4887 (1) 1-1/2in Die Grinder
- DWE4887 (2) 1-1/2in Die Grinder
- DWE43144N (Type 1) 6in 13a 1700mwo 9k
- DWE43114 (Type 1) 4-1/2i5in 13a,11k Rp
- DWE43066N (Type 1) 5/6 13a 1700mwo 9k T
- DWE43066 (Type 1) 5/6 13a 1700mwp 9k T
- DWE4887N (2) 1-1/2in Die Grinder
- DWE4887N (1) 1-1/2in Die Grinder
- DWE43114N (Type 1) 4-1/2/5in 13a 11k Rp
- DWE43115 (Type 1) 4-1/2/5in 13a 11k Tr
- DWE43113 (Type 1) 4.5-6in 13a Trig Swi
- DWE4012 (Type 1) 4.5in Sm Angl Grnder
- DWE43144 (Type 1) 6in 13a 1700mwo 9k
- DWE43140 (Type 1) 6in 13a 1700mwo 9k S
- D28494G (Type 1) Large Angle Grinder
- DWE402W (Type 1) 4-1/2in Angle Grinder
- DWE43115N (Type 1) 4-1/2/5in 13a 11k Tr
- DCG426B (Type 1) 20v Var Sp Die Grind
- DWE46166N (Type 1) 6in 9krpm, No Loc On