Dynabrade Grinder Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Dynabrade Grinder Parts
Your Price
$6.40
In Stock
Dynabrade Grinder Spring
PartSelect Number PS10336574
Manufacturer Part Number 01468
This an authentic Dynabrade replacement part used in buffers and sanders. The spring is used to absorb shock from the valve when tool is in use. It goes between the air control ring and the tip valve. A wrench may be needed to properly install this part. This item is available as an individual replacement part.
Your Price
$45.53
In Stock
Dynabrade Grinder Blades
PartSelect Number PS10336584
Manufacturer Part Number 01480
These authentic OEM sourced replacement rotor blades are commonly used on Dynabrade sanders and grinders. They are attached to the rotor inside the tool pushing the air. This set includes (4) compound material blades per order. Replacing these blades you will need a set of wrenches and pliers.
Your Price
$47.76
In Stock
Dynabrade Grinder Blades/rotor (4 Pack)
PartSelect Number PS10336518
Manufacturer Part Number 01011
These blades in your die grinders are located on the rotor within the motor housing. This OEM set includes four blades, each measuring approximately 1-1/2 inches by 3/8 inches. When the tool is turned on, the motor drives the rotor, causing the blades to spin rapidly and help you shape various materials. It is important to regularly check the condition of the blades and replace them if they are visibly worn out or misaligned. Additionally, pay attention to any unusual signs during operation, such as increased noise, vibration, or burning smells. To replace the blades, refer to your user manual for detailed instructions on how to disassemble the motor housing. Typically, you will need to secure the tool in a padded vise, then use an adjustable pin wrench to remove the lock ring. Proceed with disassembling the tool by removing the collet and rotor nut from the rotor shaft, followed by the cylinder, spacer, and the four blades from the rotor.
Your Price
$25.55
In Stock
Dynabrade Grinder Brush And Holder (brush
PartSelect Number PS11867193
Manufacturer Part Number 30438
This brush and brush holder set is supplied by the original manufacturer for use in vacuums. It includes 2 carbon brushes, 2 brush holders, and two springs. The brushes have measurements of 1.5 inches long, 3/4 inches wide, and 3/16 inches thick. Over time the brushes may wear down, become damaged, or dislodged, leading to reduced power output, unusual noses, and difficulties starting the equipment. Ensure the equipment is switched off before beginning the repair. Remove the motor housing to access the brushes. Carefully remove the springs and fasteners that hold the brush and holders in place. Mount the new brush holders onto the motor and position the new brushes into the holders. Secure the brushes in place with the spring and reattach the motor housing to complete the repair.
Your Price
$9.67
On Order
Dynabrade Grinder Seal
PartSelect Number PS10336573
Manufacturer Part Number 01464
This is a manufacturer sourced replacement seal. It is specially produced for use with Dynabrade sanders. This is one of the seals for the tip valve/inlet bushing. Over time seals tend to shrink and crack allowing for air leaks. At that time it should be replaced to maintain top performance. It is made out of rubber material and it is sold individually. Replacing this item you would need a wrench to replace this item.
Your Price
$6.40
In Stock
Dynabrade Grinder Felt Silencer
PartSelect Number PS10336589
Manufacturer Part Number 01486
This felt silencer is an OEM part direct from Dynabrade. Compatible with a variety of power tools, this component is fitted onto the shaft, between the locking ring and bearing. You may require a screwdriver or Allen wrench when replacing this part. The felt silencer is sold individually.
Your Price
$71.22
In Stock
Dynabrade Grinder Carbon Brush Set
PartSelect Number PS10337784
Manufacturer Part Number 40750
It is an authentic manufacturer-sourced replacement set which is specially designed for use with Dynabrade power tools. The brushes play the key role by conducting electric current while maintaining physical contact with an armature. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem. This set includes two high-quality carbon brushes with attached lead wires.
Your Price
$68.19
In Stock
Dynabrade Grinder Throttle Lever Assy., Safety L
PartSelect Number PS12023128
Manufacturer Part Number 01950
This part has been OEM sourced and is intended to be used with buffers, sanders, right angle reciprocating filers, and die grinders from Dynabrade. The metal lever assembly includes the safety lock and attaches to the body of the tool. This item is used to actuate the valve stem to allow compressed air into the tool to drive the rotor. The throttle lever assembly is sold as an individual replacement part.
Your Price
$17.45
In Stock
Dynabrade Grinder Tip Valve
PartSelect Number PS10336578
Manufacturer Part Number 01472
This is a genuine OEM part. The Dynabrade tip valve is manufactured for use with orbital sanders, finishers and grinders. This metal and plastic valve often sits in the air inlet bushing, and is supported by a spring. The valve is sold individually, please see specific manual for additional repair information. A pair of pliers, wrench and a screwdriver may be necessary for installation.
Your Price
$6.41
In Stock
Dynabrade Grinder Felt Silencer
PartSelect Number PS10336916
Manufacturer Part Number 04078
This felt silencer is supplied directly from the original equipment manufacturer. The Dynabrade part is compatible with a variety of different power tools and equipment. This item is fitted between the lock ring and the air control ring, minimizing the noise. The felt silencer is sold individually. For the repair, you may need a wrench and pliers.
Dynabrade Grinder Appliance Types
Popular Dynabrade Grinder Models
Below are the most popular Dynabrade Grinder models we have. Enter your model number in the search box to find your model.
- 51865 1 Hp Router Front Exhaust, Pattern Trim
- 51700 1/8" Straight Line Pencil Grinder
- 53781 .7 HP Straight Line Extension Die Grinder
- 43505 .4 Hp Extension Die Grinder Rear Exhaust, Governor-Controlled
- 66402 Precision Tool Post Grinder
- 52218 .4 HP Staight Line Die Grinder
- 52267 .5 HP Offset Die Grinder
- 51307 .5 HP Straight Line Die Grinder
- 65752 Electric Precision Tool Post Grinder
- 52298 .7 HP Offset Die Grinder
- 52721 1 HP Extension Cone or Plug Grinder
- 52615 5" Dia. Vacuum Cut-Off Tool
- 51701 3mm Straight Line Pencil Grinder
- 52317 .4 HP Right Angle Die Grinder
- 51301 .5 HP Straight Line Die Grinder
- 53502 .5 HP Straight Line Extension Grinder
- 53242 3 Hp Depressed Center Wheel Grinder
- 51704 3mm Straight Line Pencil Grinder
- 18020 1/4" Die Grinder
- 55540 .4 Hp Right-Angle Die Grinder 12,000 Rpm, Rear Exhaust