My Orders
Seeder Parts
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
Popular Seeder Parts
Genuine Classen replacement part, this item is sold individually. This is the part that makes contact with the turf when using a Seeder or Turf Rake. Over time this part will wear down and not properly do the job it was intended to do. When replacing this part it is advised to inspect the remaining Blades for wear.
Genuine Classen replacement part, this item is sold individually. This is the part that makes contact with the turf when using a Seeder or Turf Rake. Over time this part will wear down and not properly do the job it was intended to do. When replacing this part it is advised to inspect the remaining Blades for wear.
This spring peened replacement component is designed for turf rakes, dethatchers, and seeders to help maintain effective thatching and soil conditioning performance. Manufactured from durable metal for long service life, it supports proper tine or spring action during operation, allowing air, water, and nutrients to reach the soil surface. It’s a practical OEM replacement for restoring reliable, consistent performance when existing springs become worn, bent, or damaged.
This spring peened replacement component is designed for turf rakes, dethatchers, and seeders to help maintain effective thatching and soil conditioning performance. Manufactured from durable metal for long service life, it supports proper tine or spring action during operation, allowing air, water, and nutrients to reach the soil surface. It’s a practical OEM replacement for restoring reliable, consistent performance when existing springs become worn, bent, or damaged.
Genuine Classen replacement part, this item is sold individually. The spacer is used on the Classen Turf Rakes & Turf Seeders shown below. The spacers are placed on the Satelite Shaft in between the Blades to keep them the correct distance apart. Theses spacers have a tendency to wear, it is advised to keep a few of the on hand for future use.
Genuine Classen replacement part, this item is sold individually. The spacer is used on the Classen Turf Rakes & Turf Seeders shown below. The spacers are placed on the Satelite Shaft in between the Blades to keep them the correct distance apart. Theses spacers have a tendency to wear, it is advised to keep a few of the on hand for future use.
This is an authentic item that is supplied by the original equipment manufacturer for use with Classen equipment. It is an identical replacement for a missing or a faulty e-ring that was installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality component is made of durable metal and is sold individually.
This is an authentic item that is supplied by the original equipment manufacturer for use with Classen equipment. It is an identical replacement for a missing or a faulty e-ring that was installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality component is made of durable metal and is sold individually.
This genuine replacement part is sourced directly from the manufacturer for use on various machines. It is made of metal with a rubberized coating, it is not sold as part of a kit or assembly, and is sold individually.
This cable should be replaced when it is damaged, worn, or stretched. Customers rate this repair as Easy.
This genuine replacement part is sourced directly from the manufacturer for use on various machines. It is made of metal with a rubberized coating, it is not sold as part of a kit or assembly, and is sold individually.
This cable should be replaced when it is damaged, worn, or stretched. Customers rate this repair as Easy.
MAKE THIS REPAIR A GUARANTEED WIN
OVER 2 MILLION PARTS TO ENSURE VICTORY
This is a genuine Classen part sourced directly from the manufacturer for use in turf rakes and turf seeders. The cable assembly connects to the upper main handle and is made of metal and plastic. A wrench may be necessary during the installation of this part. It might become broken or stretched and will need to be replaced. This is available as an individual replacement part.
This is a genuine Classen part sourced directly from the manufacturer for use in turf rakes and turf seeders. The cable assembly connects to the upper main handle and is made of metal and plastic. A wrench may be necessary during the installation of this part. It might become broken or stretched and will need to be replaced. This is available as an individual replacement part.
The satellite shaft goes between the rake main shaft and the finger spacer. It is available as an individual replacement part, but keep in mind that more than one may be needed. This part is an OEM from Classen for use in turf seeders and turf rakes. This shaft is made out of metal and may become broken and will need to be replaced. A screwdriver might be needed during the installation process.
The satellite shaft goes between the rake main shaft and the finger spacer. It is available as an individual replacement part, but keep in mind that more than one may be needed. This part is an OEM from Classen for use in turf seeders and turf rakes. This shaft is made out of metal and may become broken and will need to be replaced. A screwdriver might be needed during the installation process.
This is a genuine OEM approved replacement belt which is specially designed for use with Classen turf seeders. It is the main belt which drives the unit, over time it may wear out and stretch eventually requiring a replacement. Make sure to clean pulleys before installing the new belt to ensure the peak performance and longevity of your new belt. This durable part is made of high-quality rubber and it is sold individually.
This is a genuine OEM approved replacement belt which is specially designed for use with Classen turf seeders. It is the main belt which drives the unit, over time it may wear out and stretch eventually requiring a replacement. Make sure to clean pulleys before installing the new belt to ensure the peak performance and longevity of your new belt. This durable part is made of high-quality rubber and it is sold individually.
This is an original Classen replacement part, not an aftermarket imitation. The nut is manufactured for use with outdoor power equipment like sod cutters. This nut is a versatile part and can be used on different types of machines, please see model diagram for part uses, location, and application. The nut is sold individually.
This is an original Classen replacement part, not an aftermarket imitation. The nut is manufactured for use with outdoor power equipment like sod cutters. This nut is a versatile part and can be used on different types of machines, please see model diagram for part uses, location, and application. The nut is sold individually.
This is an authentic replacement part manufactured for use with Classen sod cutters, aerators, seeders, and turf brushes. Lock washers are commonly used to prevent bolts from unthreading from the part assembly the bolt is used to secure. The lock washer is sold as an individual replacement part, please see model diagram for part location and usage.
This is an authentic replacement part manufactured for use with Classen sod cutters, aerators, seeders, and turf brushes. Lock washers are commonly used to prevent bolts from unthreading from the part assembly the bolt is used to secure. The lock washer is sold as an individual replacement part, please see model diagram for part location and usage.