Seeder Hardware

Seeder Washer 5/16 Std Flt It is an authentic item that is supplied directly from the original equipment manufacturer for use with Husqvarna and Poulan lawn and garden equipment. A washer is generally utilized to provide a tight seal between connected parts, over time it may wear out or simply get lost eventually requiring a replacement. Please make sure to check the appropriate diagrams of your specific model for the correct location and application of this hardware. Keep in mind this durable metal washer is sold individually.

Seeder Nyloc Hex Nut This genuine manufacturer sourced hardware is designed for use on Husqvarna and Poulan riding lawn mowers and tractors. This hex nut has multiple applications depending on the model. Please make sure to check appropriate diagrams for correct location and use of this item. Please note, this metal hex nut is sold individually.

Seeder Finger Spacer Genuine Classen replacement part, this item is sold individually. The spacer is used on the Classen Turf Rakes & Turf Seeders shown below. The spacers are placed on the Satelite Shaft in between the Blades to keep them the correct distance apart. Theses spacers have a tendency to wear, it is advised to keep a few of the on hand for future use.

Seeder Nut-lock, Ni The Ni Lock Nut (Nylock Nut) is a Silver, 5/16x18, individually sold metal nut. It can be adjusted and replaced using a wrench or socket and torque wrench to the manufacturer specfications, and is used to secure the sheer pin in place on the augur. These nuts are a one time use part due to their locking mechanism. You'll know the nut has broken because the augur will not spin, and this is when the part should be replaced. Customers found this to be an easy repair.

Seeder Hex Nut This genuine manufacturer sourced replacement part designed for use with lawn mowers. A lock nut is a type of nut that resists loosening when properly threaded onto a bolt. This is standard hardware which has multiple applications based on your tool. Please refer to diagrams for proper use. This lock nut is made out of metal and it is sold individually. Would require a wrench to remove or install this hex nut.

Seeder Nut-flange, Ni This is a genuine OEM sourced hardware that is specifically made for use with Toro lawn and garden equipment. It is a standard hardware which may have multiple applications depending on the model of your unit. Please make sure to refer to the appropriate diagrams for the correct location and application of this part. Keep in mind this high-quality flange nut is made of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.

Seeder E Ring This is an authentic item that is supplied by the original equipment manufacturer for use with Classen equipment. It is an identical replacement for a missing or a faulty e-ring that was installed on a new unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality component is made of durable metal and is sold individually.

Seeder Nut This nylon-insert flange nut is designed for use on outdoor power equipment to securely fasten components exposed to vibration and torque. The built-in flange helps distribute load evenly without the need for a separate washer, while the nylock insert resists loosening during operation. It’s a simple, reliable replacement for maintaining safety, stability, and secure assembly across a wide range of equipment.

Seeder Screw-hh It is made of metal and is sold individually. The screw connects to the idler pulley. A socket set might be needed during the installation process. Over time this part may become stripped and will need to be replaced. This part is an OEM from Toro and Lawn Boy for use in snowthrowers, tillers, blower-vacuums, and lawn tractors.

Seeder Washer 3/8 Flat This is an authentic replacement part that has been sourced from the original manufacturer to be used with lawnmowers, stump grinders, dethatchers, aerators, and power rakes from Husqvarna, Bluebird, Poulan, and Jonsered. The washer is used with different types of equipment and the application of the washer can vary based on the model of the machine. This washer is priced as a single item.