Shindaiwa Parts | Same Day Shipping | Millions of Parts
You are logged in as a customer LOG OUT
Shipping Same-day Shipping
USA shipping Ships from USA
Warranty 1 Year Warranty
Returns 365 Day Returns

Hello!

You're visiting the PartSelect site in U.S.

Would you like to shop on the Canadian site?

Stay on this site
Go to Canadian site

Popular Shindaiwa Parts

Fuel Filter – Part Number: A369000480
Your Price
$5.15
Shindaiwa Fuel Filter
2 Reviews
PartSelect Number PS11826311
Manufacturer Part Number A369000480
This OEM Fuel Filter is a silver and white, steel/felt, part measuring about 1.25 inches in length and 3/4 inch wide. It can be installed with pliers and is rated as Easy to install by customers. This part attaches inside the fuel tank to clean the fuel of debris, and should be replaced during regular maintenance, check your manual for recommended replacement time. If the filter is leaking or it has a blockage preventing fuel flow, then it should be replaced. If the engine sounds like it is not getting enough fuel, then remove the filter and check it for blockage.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
Paul from SENECA, SC says,

Fuel line grommet rotted
This blower is quite old looked on YouTube. Removed grommet with needle nose pliers. Removed tank to install new parts. I had trouble getting return line off carb so planned to reuse it after grommet ...read more

Primer Pump – Part Number: 12318140630
Your Price
$4.88
Shindaiwa Primer Pump
PartSelect Number PS8858167
Manufacturer Part Number 12318140630
The Primer Pump, aka the Pump Bulb, is a clear, individually sold, plastic part, sourced from the original equipment manufacturer. It has an Outer Diameter of 0.616 Inches, 15.66mm and is 0.558 Inches and 14.19mm in height. This part is used to pump fuel from the tank to the carburator and is rated Easy to install. This part installs onto the primer assembly. If the part dries out or starts leaking that means it is broken (likely due to fatigue or general wear) and must be replaced. Check the model number to ensure you are choosing the right part.
Fixes these symptoms
No Symptoms for this part
Nut – Part Number: V265000200
Your Price
$2.99
Shindaiwa Nut
PartSelect Number PS9236120
Manufacturer Part Number V265000200
This flanged hex nut is a genuine OEM steel fastener specifically designed for use in chainsaws and chop saws, serving the purpose of securing various components in these outdoor power equipment devices. It features a flange base that acts as a built-in washer for extra stability and security. The hex nut has a diameter of 6mm, and its threaded shaft has a pitch of 20, ensuring a secure and reliable connection. Over time, the bolt can be susceptible to corrosion, cracks, or worn threads, which may result in the loosening or detachment of the connected parts. Detectable signs of such issues include excessive noise, vibrations, and equipment instability. To address this, it is recommended to inspect all bolts within your equipment and replace any that are no longer functioning properly. To replace the bolt, simply use a wrench or socket to loosen and remove the old one, position the new bolt on the mounting surface, and securely tighten it until the flange is flush against the surface. Please note that each flanged hex nut is sold individually.
Fixes these symptoms
No Symptoms for this part
Nut 5 – Part Number: 90050000005
Your Price
$2.99
Shindaiwa Nut 5
PartSelect Number PS9148697
Manufacturer Part Number 90050000005
This OEM nut is a 5mm, gold, metal nut, which is sold individually. It can be installed with a Wrench or Socket and Torque Wrench by torquing to the manufacturer specifications. This nut is used to secure another part in place, and should be replaced if damaged due to fatigue (such as damaged threads or rounded ends). This nut can have various uses on various equipment, and as such the difficulty of the installation can vary, but generally this is an easy repair.
Fixes these symptoms
No Symptoms for this part
Filter, Fuel – Part Number: A369000460
Your Price
$8.26
Shindaiwa Filter, Fuel
2 Reviews
PartSelect Number PS11826309
Manufacturer Part Number A369000460
The Fuel Filter is a white and silver, individually sold, steel part. It reuires pliers to install and its installation is rated as Easy. The part attaches inside of the fuel tank and is used to clean the fuel of debris. It should be changed regularly. Check your owners manual for the recommended replacement schedule for your engine. If the fuel is leaking or their is a blockage, you will know the part is broken and will likely need to be replaced. To check for small leaks, feel around for dampness and the smell of fuel.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
Keith from NORWOOD, NJ says,

Replace clogged fuel filter.
Thru fuel cap, insert copper wire with hook formed on end. Fish around until you grab the fuel line. Pull the fuel line and filter thru the fuel fill neck.
Pull off old filter and replace with ne...read more

Primer – Part Number: P005003120
Your Price
$6.33
Shindaiwa Primer
3 Reviews
PartSelect Number PS11826485
Manufacturer Part Number P005003120
This Primer Bulb is a clear, plastic, individually sold part with an Outer Diameter of 0.720 inches (18.30 mm) and a Height of 0.674 inches (17.12 mm). With Flange: 0.842" (21.40 mm). This part is rated as Easy to install by customers, and attaches to the primer pump assembly. If the part shows signs of breakage, such as cracks appearing due to the bulb drying out, or fatigue, then it must be replaced. Refer to your owners manual/model number to ensure you are choosing the correct part.
Fixes these symptoms
No Symptoms for this part
Fuel Filter – Part Number: A369000440
Your Price
$6.56
Shindaiwa Fuel Filter
PartSelect Number PS11836543
Manufacturer Part Number A369000440
This OEM Fuel Filter is a white and silver, steel part, sold individually. It requires a pair of pliers to install and is ranked as Easy to repair by our customers. This part attaches inside of the fuel tank, and is used to clean the fuel of debris. This part should be changed regularly as part of good engine maintenance. If the engine sounds like it is not getting enough fuel or is underperforming, remove the filter to heck for a blockage. If there is a blockage or the part is leaking, then it likely needs a replacement.
Fixes these symptoms
No Symptoms for this part
Breather Assembly – Part Number: A356000040
Your Price
$6.26
Shindaiwa Breather Assembly
PartSelect Number PS9314032
Manufacturer Part Number A356000040
This breather, also known as a fuel tank vent, is a genuine OEM replacement part used in trimmers and edgers. It is responsible for managing the pressure and air flow inside the fuel system, by acting as a valve for the fuel tank. It allows clean air to enter the tank, while preventing dirt and debris from entering as well. Over time, the breather can crack or become clogged leading to restricted air flow, inconsistent fuel supply, fuel leakage, hard starting, and engine stalling. Locate the breather on or near the fuel tank and disconnect the hoses and fasteners attached to it. Depending on your model you may need to remove the fuel tank to complete this replacement. Place the new breather in position and reattach the hoses and fasteners. Test the new part by gently blowing into the breather to confirm that the air flow is not restricted.
Fixes these symptoms
No Symptoms for this part
Gasket – Part Number: V107000010
Your Price
$3.99
Shindaiwa Gasket
PartSelect Number PS9237390
Manufacturer Part Number V107000010
This individually sold fuel gasket is designed for use with handheld lawn and garden equipment and is the seal for the gas cap. This gasket is a genuine OEM part made of a composite material and will eventually become brittle because it interacts with gas and oil, meaning it will need replacing before it becomes debris in the fuel tank. This gasket not only prevents debris from entering the fuel tank, but it also prevents any leaks. To replace, simply unscrew your gas cap and remove the old gasket from the cap, and then replace it with the new.
Fixes these symptoms
No Symptoms for this part
Washer 5 – Part Number: 90060000005
Your Price
$2.99
Shindaiwa Washer 5
PartSelect Number PS9162891
Manufacturer Part Number 90060000005
Fixes these symptoms
No Symptoms for this part

Troubleshooting at your fingertips

Not sure where to start on that repair?

We've got you covered!

With the Fix app, you can quickly and easily find information on your appliance, along with videos and articles to help you fix it.

"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed."
- Clever Jeff ★★★★★

Apple Store Google Play Store

All brand logos are trademarks of their respective owners.

The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.

Copyright © 1999-2023, Eldis Group Partnership. All rights reserved.