Utility Vacuum Parts

This replacement toggle switch turns a wet/dry utility vacuum on and off. Replace it if the existing switch is worn or damaged and the vacuum will not start or shuts off intermittently. One switch is included. Verify fit before ordering.

Genuine Ridgid replacement part, this item is sold individually. The purpose of the 29823 Caster it to make the Vacuums shown below more mobile. To replace the Caster , pull on it and remove it from the Caster Foot, then just simply press the new caster back in.

This 120 volt motor assembly powers compatible dust collectors and utility vacuums. A replacement may be needed if the unit will not start, runs unevenly, loses suction, or has a damaged motor. Unplug the equipment before opening the housing. Check the exact model and type number before ordering.

A vacuum that loses power or works only when moved may have a loose electrical connection. This replacement terminal block holds several internal wires in their correct positions and provides a firm path for electrical current. Inspect it for melted plastic, dark marks, broken mounting points, or terminals that no longer grip securely. Similar symptoms can come from a damaged power cord, weak battery, faulty switch, or worn motor. Disconnect the cord and remove all batteries before service. Handle wires by their connectors, not by pulling on the insulation. Match every connection to the wiring diagram and replace all protective covers before testing the vacuum.

This is a genuine Milwaukee replacement hose assembly. It is supplied directly from original equipment manufacturer for use with vacuum cleaners. This flexible hose connects to the main unit providing user with easy way to pick up dust and debris. It is made out of black plastic and it is sold individually. Please note the nozzles and connecting pipes are sold separately. The vacuum can be used for debris pickup or as a blower, depending on the port used. • For debris pickup, insert the large end of hose into the intake port of the motor housing, lining up the tabs on the hose with the notches in the port. Twist to secure and form a tight fit • To use as a blower, insert the large end of hose into the blower port of the motor housing, lining up the tabs on the hose with the notches in the port. Twist to secure and form a tight fit • Attach one of the accessories to the other end of the hose. Twist to form a tight fit. Use 1-1/4" opening accessories

Genuine Ridgid replacement part, this item is sold individually. The 83872 is used in the Ridgid Vacuums that have a threaded end on the Filter Cage. Its purpose is to secure the filter and filter cage together.

This is a genuine manufacturer-sourced caster which is specially designed for use with Craftsman vacuums. It is an identical replacement for a missing or faulty caster that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality caster is made of durable materials and is sold individually.

Genuine Ridgid replacement part this item is sold individually. There are four of these used on each of the Vacuum models shown below. The Foot is attached to the side of the canister and the Caster is pressed into the Foot.

This is an original part that is sourced directly from DeWalt for use with a wet/dry vacuum. This part vacuums up dirt and debris and delivers it to the tank. The hose is made of flexible rubber and includes the attachment ends. This part is sold as an individual replacement part. This part does not require the use of any tools when replacing.

This is a genuine OEM sourced replacement part designed for use with Ridgid wet/dry vacuum. It is an insert that is connected to the body and it holds the wheel/caster. This part is made out of plastic and it is sold individually.