Band Saw Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Band Saw Parts
Your Price
$11.00
In Stock
Band Saw Blade Pulley Tire
PartSelect Number PS10133097
Manufacturer Part Number 45-69-0010
This is a Genuine Milwaukee part It is sold individually Two tires are needed on the Bandsaw. If one tire is worn, it is advisable to replace both at the same time. The purpose of the Blade Pulley Tire is to keep the blade tracking correctly. Over time they will become brittle or stretched out. You then will have the problem of the blade coming off the pulleys or not tracking properly. The tires simply stretch onto the pulleys. No tear down of any parts is needed.
Your Price
$6.15
In Stock
Band Saw Pulley Tire
PartSelect Number PS10133098
Manufacturer Part Number 45-69-0030
This is a Genuine Milwaukee part It is sold individually Two tires are needed on the Bandsaw. If one tire is worn, it is advisable to replace both at the same time. The purpose of the Blade Pulley Tire is to keep the blade tracking correctly. Over time they will become brittle or stretched out. You then will have the problem of the blade coming off the pulleys or not tracking properly. The tires simply stretch onto the pulleys. No tear down of any parts is needed.
Your Price
$6.15
In Stock
Your Price
$5.95
In Stock
Band Saw Ball Bearing
PartSelect Number PS10180918
Manufacturer Part Number 605040-65
This Ball Bearing is sealed on both sides. It is a genuine DeWalt replacement part and is sold individually. • Ball bearings are used to reduce friction between rotating parts.. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.
Your Price
$6.15
In Stock
Band Saw Sleeve Bearing
PartSelect Number PS10128876
Manufacturer Part Number 42-40-0580
This is a genuine Milwaukee replacement part, it is sold individually. These sleeve bearings are installed on the Blade Pulley Axles on the Milwaukee Bandsaw models shown below. They fit inside of the Blade Pulleys When the blade on the bandsaw is not tracking properly, it may be time to replace them. There are four of these on each tool. This also would be a good time to replace the 45-69-0010 Blade Pulley Tires, as they also aid in blade tracking.
Your Price
$13.91
In Stock
Band Saw Carbon Brush With Spring
PartSelect Number PS10176277
Manufacturer Part Number 5140011-85
This is an authentic OEM replacement part. Sold individually. Carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Because of this, carbon brushes are one of the most commonly replaced power tool parts. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems. This part is compatible with the models listed below.
Your Price
$10.65
In Stock
Band Saw Table Insert
PartSelect Number PS10323790
Manufacturer Part Number 426020630001S
This is a table insert plate for your saw. It is attached to the table, and provides access to the blade. A table insert protects the rest of the unit by preventing wood from getting jammed under the blade during cutting. The slit in the insert plate allows for the saw blade to run smoothly. Before installing this part, unplug your saw.
Your Price
$5.37
In Stock
Band Saw Carbon Brush
PartSelect Number PS10122132
Manufacturer Part Number 22-18-0025
This manufacturer sourced replacement part is designed for use with Milwaukee band saws. It includes one (1) carbon brush with lead wire and a spring attached. Carbon brushes are commonly replaced item on power tools Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. It is recommended to replace both brushes at the same time. You would need a screwdriver and pliers to complete this job. • First remove screws holding the cover together • Remove the housing to gain access to armature and brush holder • Remove the old brush • Install the new brush • Reassemble and test your tool
Your Price
$15.42
In Stock
Band Saw Rear Roller Kit
PartSelect Number PS10128569
Manufacturer Part Number 42-28-0025
This rear guide roller kit is an OEM item which is specially designed for Milwaukee band saws. The purpose of this component is to support and guide the blade. It is an identical replacement for a missing or a faulty item that was installed on a new unit. Note, this is the rear guide, the front guide is sold separately. Make sure to refer to the appropriate diagrams of your model for the correct location and application of this part. This high-quality kit includes one durable metal roller and two screws to secure it. To perform this repair you will need a screwdriver set to remove the pulley and the cover.
Your Price
$41.51
In Stock
Related Band Saw Parts
- Band Saw Hardware
- Band Saw Bearings
- Band Saw Switches
- Band Saw Blades
- Band Saw Pulleys
- Band Saw Belts
- Band Saw Wheels and Rollers
- Band Saw Power Cords
- Band Saw Brushes
- Band Saw Transmissions and Clutches
- Band Saw Knobs
- Band Saw Hinges
- Band Saw Springs and Shock Absorbers
- Band Saw Caps and Lids
- Band Saw Brackets and Flanges
- Band Saw Latches
- Band Saw Drawers and Glides
- Band Saw Circuit Boards and Touch Pads
- Band Saw Gears
- Band Saw Lights and Bulbs
- Band Saw Motors
- Band Saw Handles
- Band Saw Seals and Gaskets
- Band Saw Wire Plugs and Connectors
- Band Saw Legs and Feet
Popular Band Saw Models
Below are the most popular Band Saw models we have. Enter your model number in the search box to find your model.
- 6230 4-3/4 Inch Deep Cut Band Saw
- 6230 4-3/4 Inch Deep Cut Band Saw
- 6230 4-3/4 Inch Deep Cut Band Saw
- 6230 4-3/4 Inch Deep Cut Band Saw
- 6230 4-3/4 Inch Deep Cut Band Saw
- 6230 4-3/4 Inch Deep Cut Band Saw
- 6230 4-3/4 Inch Deep Cut Band Saw
- 6230 4-3/4 Inch Deep Cut Band Saw
- 6230 4-3/4 Inch Deep Cut Band Saw
- 6230 4-3/4 Inch Deep Cut Band Saw
- 6230 4-3/4 Inch Deep Cut Band Saw
- 6230 4-3/4 Inch Deep Cut Band Saw
- 6230 4-3/4 Inch Deep Cut Band Saw
- 6230 4-3/4 Inch Deep Cut Band Saw
- 3410 Bandsaw
- DWM120 Band Saw
- PCB330BS 14 In. Band Saw
- 8201 14-Inch Vertical Bandsaw
- 7020 Horizontal Cut-Off Bandsaw
- 6236 Two Speed Deep Cut Bandsaw