Delta Band Saw Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Delta Band Saw Parts
Your Price
$16.48
In Stock
Delta Band Saw Carbon Brush With Spring
PartSelect Number PS10176277
Manufacturer Part Number 5140011-85
This is an authentic OEM replacement part. Sold individually. Carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Because of this, carbon brushes are one of the most commonly replaced power tool parts. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems. This part is compatible with the models listed below.
Your Price
$13.51
On Order
Delta Band Saw Table Insert
PartSelect Number PS10323790
Manufacturer Part Number 426020630001S
This is a table insert plate for your saw. It is attached to the table, and provides access to the blade. A table insert protects the rest of the unit by preventing wood from getting jammed under the blade during cutting. The slit in the insert plate allows for the saw blade to run smoothly. Before installing this part, unplug your saw.
Your Price
$46.53
In Stock
Your Price
$15.07
On Order
Delta Band Saw Trunnion
PartSelect Number PS10323810
Manufacturer Part Number 426020950002S
A genuine Delta replacement part, sold individually. A trunnion is a cylindrical protrusion used as a mounting and/or pivoting point. Held in place by three Cap Screws (901027631530), this part is compatible with the band saws listed below. A wrench is needed for repair.
Your Price
$58.17
In Stock
Delta Band Saw Bearing
PartSelect Number PS10315390
Manufacturer Part Number 1086894S
This Ball Bearing is sealed on both sides. This genuine Delta replacement part is sold individually. rnrn • Ball bearings minimize friction between rotating parts in your tool. The balls or rollers bear the load and spin, distributing the weight evenly, while the minimal contact area of the balls reduces friction. This reduces wear on the tool, allowing it to run smoothly. rn • Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.
Your Price
$135.07
On Order
Delta Band Saw Switch
PartSelect Number PS10328665
Manufacturer Part Number 905224
Restore reliable performance to your Delta power tools with this genuine manufacturer-approved replacement switch. Designed for select Delta models, this part controls the on/off function and is a common replacement due to regular wear and tear. Over time, the internal components of switches can wear out, making replacement necessary to keep your tools running safely and efficiently.
This switch is sold individually and is built to meet the original equipment standards for quality and durability. Whether you're repairing a favorite tool or performing routine maintenance, this part helps ensure smooth operation and dependable control.
Your Price
$6.40
In Stock
Your Price
$46.53
In Stock
Delta Band Saw Push-button Switch
PartSelect Number PS10328372
Manufacturer Part Number 904121
This is a Genuine OEM Sourced replacement part used on Delta Power Equipment. This switch has a Plastic Body. Switches are a commonly replaced part in power tools, handling on/off operations. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement. Please note the Switch Box and the Cover are Sold Separately. To replace this switch you would need a Screwdriver. • First make sure the tools is not plugged in • Then you want to remove Screws used to hold two pieces of Housing Set together • Disconnect Wires from the old Switch and remove it from the Housing • Place the new Switch in the Housing and connect Wires to it • Reassembly the Housing
Your Price
$41.88
In Stock
Delta Band Saw Hinge
PartSelect Number PS10328602
Manufacturer Part Number 905153
This hinge has been OEM sourced to make certain of a high-quality standard. The metal hinge is intended to be used with Delta band saws. The hinge is used to mount and support the adjustment sliding bracket. This item is available as an individual replacement part.
Your Price
$12.80
In Stock
Delta Band Saw Key
PartSelect Number PS10318424
Manufacturer Part Number 1343758
This is a genuine OEM replacement part, it is sold individually. This Key is needed to operate all of the models listed below. It is inserted into the switch to make it possible for the machine to turn on. It can be removed for the purpose of unauthorized use of the machine.
Delta Band Saw Appliance Types
Popular Delta Band Saw Models
Below are the most popular Delta Band Saw models we have. Enter your model number in the search box to find your model.
- SM400 (Type 1) Band Saw
- BS150LS (Type 1) Band Saw
- BS220LS (Type 1) Band Saw
- 28-276 14" 3/4HP Motor Open Stand Band Saw
- 28-280 (Type 1) Band Saw
- 28-185 (Type 1) Band Saw
- 36-924 (Type 1) Precision Saw Guide
- 28-195 (Type 1) Band Saw
- 28-475X (Type 1) Band Saw
- 28-300 (Type 1) Band Saw
- 20-715 (Type 1) Band Saw
- 28-209 (Type 1) Band Saw
- 28-248G (Type 1) 14" Band Saw
- 28-248F (Type 1) Band Saw
- 28-140 (Type 1) 10" Band Saw
- 28-348G (Type 1) Band Saw
- 28-255 (Type 1) Band Saw
- 28-653 (Type 1) 20" Wood Band Saw
- 34-890 (Type 1) Panel Saw
- 28-290 (Type 1) 14" Band Saw