Official Sander Polisher Parts

Carbon Brush Assembly – Part Number: 22-18-0680

Your Price

$5.37

PartSelect Number PS10122192

Manufacturer Part Number 22-18-0680

Genuine Milwaukee replacement part. Includes 1 Carbon Brush with wire lead, brush spring and bracket attached. • Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

Your Price

$5.95

Sander Polisher Brush Box Asm

PartSelect Number PS12522639

Manufacturer Part Number N292059

This is a brush box assembly designed for various sander models. Brush boxes are essential components that house carbon brushes responsible for transferring electricity from the motor to the sanding pad. When the carbon brush assembly wears out, it can no longer efficiently transfer electricity, causing the sander to stop working. This brush box assembly includes the carbon brush, its housing, and the necessary wiring. Replacing the brush box assembly is a straightforward process, requiring only a screwdriver and a set of pliers. Begin by disconnecting your sander from its power source, whether it is a battery or a wall outlet. Next, remove the screws securing the main housing of the sander and locate the brushes inside. Use a set of pliers to disconnect the wire from the old brush and a flat-head screwdriver to lift the old brush out of its slot. Insert the new brush box assembly into the slot and connect its wires. Finally, reattach the sander outer housing and secure it with the screws.

Your Price

$11.22

Sander Polisher Carbon Brush Set

PartSelect Number PS10156649

Manufacturer Part Number CB303

This set of two carbon brushes is a genuine Makita replacement part, packaged in an official Makita retail box. Each brush includes wire leads and attached brush springs, and is designed to restore optimal performance in compatible Makita tools. Carbon brushes are among the most commonly replaced components in power tools, as they gradually wear down through friction and regular use. Worn brushes can lead to intermittent motor function, reduced power, or diminished electric braking. Replacing them can resolve these issues and restore proper motor performance. Signs of wear include brushes worn near the wire lead, or those that are cracked, pitted, or burned. When replacing carbon brushes, it’s also important to inspect the armature for any signs of damage, such as burns or cracks, which may indicate a more serious motor issue.

Your Price

$13.44

Sander Polisher Carbon Brush Set

PartSelect Number PS10156653

Manufacturer Part Number CB340

Set of 2 Carbon Brushes with wire leads and brush springs attached. The set contains genuine Makita replacement parts, and comes packaged in a Makita retail box. rnThis brush set will fit the Makita tools listed at the bottom of the page. • Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that’s operating intermittently. • New brushes can restore a motor’s electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

Videos!

Your Price

$22.86

Sander Polisher Power Cord

PartSelect Number PS10169875

Manufacturer Part Number 330072-98

Length: 8' Gauge: 18 Wires: 2 Type: Bare Wire This cord is a genuine DeWalt replacement part. This cord is compatible with the list of models below. This part is made for double insulated tools It is a two wire cord with two prongs and does not need a ground wire. The cord is sold individually. Installation of this part requires the new cord wires to go correctly into wire terminals also routing the cord and wires in the right path can help avoid pinching when the tool case (Plate) is put back into place.

Sander Base Plate – Part Number: N329079

Your Price

$41.38

Sander Polisher Sander Base Plate

PartSelect Number PS12533027

Manufacturer Part Number N329079

This genuine OEM pad assembly—also known as a hook-and-loop sanding pad or sanding disc—is designed for use with compatible sanders and sourced directly from the original manufacturer. The circular pad measures 4.75 inches in diameter, features 8 dust extraction holes, and includes a Velcro backing to securely hold sandpaper discs in place during operation. Mounted to the base of the sander, this pad allows for smooth, efficient sanding and consistent surface finishing. Over time, the Velcro surface may wear down, or the pad may become cracked or stripped, leading to poor sandpaper grip, uneven sanding, or reduced performance. Replacing the pad is a simple repair that requires no specialized tools. To install, use a screwdriver to remove the retaining screws from the old pad. Align the new pad assembly with the mounting holes and secure it using the original or replacement screws. It’s recommended to inspect and replace any stripped or corroded screws during installation for best results. This part is sold individually and is ideal for restoring your sander’s performance and extending its service life.

Your Price

$33.80

Sander Polisher Pad

PartSelect Number PS12398026

Manufacturer Part Number 151281-08

The 151281-08 Pad is used to hold 5 inch Hook and Loop sandpaper with 8 vacuum holes. Over the past few years the popularity of Hook and Loop paper has grown because of the ease of changing sandpaper when needed. Over that of the PSA (Pressure Sensitive Sandpaper) Applying too much pressure on the sander may cause premature wear on the Hook and Loop pad. When a pad needs to be replaced, simply remove the three screws that hold the pad to the sander, then replace it with a new pad.

Videos!

Your Price

$8.32

Sander Polisher Brush

PartSelect Number PS18993190

Manufacturer Part Number N031652

This brush is a genuine Porter-Cable replacement part, not generic. As pictured, this brush is ready to install and includes carbon brush, wire lead, and spring. This item is sold individually. Over time, brushes will wear down and eventually require replacement. This brush will fit the models listed in the 'Compatibility' section below. It is not guaranteed to fit any other power tool models. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor’s electric braking Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

5 DISC ASSEMBLY W/ H&L – Part Number: 300527002

Your Price

$9.87

Sander Polisher 5 Disc Assembly W/ H&l

PartSelect Number PS18693700

Manufacturer Part Number 300527002

It is a genuine OEM sourced 5-inch sanding pad assembly that is specially designed for use with Craftsman orbital sanders. Its purpose is to provide support for hook and loop sandpaper, unfortunately, over time it may wear out or get damaged eventually requiring a replacement. To make the pad last longer do not put to much pressure on the sander when using it, the pressure will create heat and ruin the small hooks on the pad. To replace the pad simply remove the four screws attaching it to the sander and replace it with the new pad. Please note this high-quality component is sold individually.

Videos!

Your Price

$8.14

Sander Polisher Brush

PartSelect Number PS12410247

Manufacturer Part Number 445861-25

(Sold Individually) This motor brush is for grinders. The motor brush transfers electric current to the spinning armature in the motor. Unplug the grinder before installing this part. Wear work gloves to protect your hands.

Shop by Department

Top Appliance Brands

Top Lawn Equipment Brands

Sander Polisher Parts

Popular Sander Polisher Parts

Related Sander Polisher Parts

Popular Sander Polisher Models

Shop by Department

Top Appliance Brands

Top Lawn Equipment Brands

Sample Model Number Tags

EasyApplianceParts is Now PartSelect!

Sander Polisher Parts

Find Your Part

Popular Sander Polisher Parts

Related Sander Polisher Parts

Popular Sander Polisher Models