Flex Sander Polisher Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Flex Sander Polisher Parts
Your Price
$12.37
In Stock
Flex Sander Polisher Carbon Brush
PartSelect Number PS16671009
Manufacturer Part Number 491594
Genuine Manufacturer Sourced replacement part designed for use with certain Flex Power Tools. This part is made out of Carbon with a Lead Wire attached. This item includes One (1) Carbon Brush per order. Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.
Your Price
$12.41
In Stock
Flex Sander Polisher Brush
PartSelect Number PS10355589
Manufacturer Part Number 331880
This replacement brush is a genuine OEM sourced item, not an aftermarket imitation. It is specially designed for Flex power tools. This item consists of (1) carbon brush with a lead wire attached. Please note, the brush holder and other parts are sold separately. It is recommended to replace both carbon brushes at the same time. You will need a screwdriver to complete this repair job.
Your Price
$6.40
On Order
Flex Sander Polisher Strain Relief
PartSelect Number PS10355546
Manufacturer Part Number 314404
This is an authentic replacement part manufactured for use with Flex polishers and angle grinders. The strain relief is used to protect the power cord where it enters the housing of the tool. This strain relief is sold as an individual replacement part.
Your Price
$16.03
Special Order
Flex Sander Polisher Cord Set
PartSelect Number PS10115196
Manufacturer Part Number A10193
This cord is a genuine Porter Cable replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. rnPower Cord Specifications: rn • 2 Prongs rn • 2 Wires rn • 16 Gauge rn • 10 Feet Long
Your Price
$33.22
In Stock
Flex Sander Polisher Switch
PartSelect Number PS10355454
Manufacturer Part Number 293504
This is an original Flex replacement part manufactured for use with orbital polishers. The switch is used to relay electricity from the power cord to the motor. This switch includes the dial to adjust the variable speed control, and the switch is available as an individual replacement part.
Your Price
$40.49
On Order
Your Price
$30.28
In Stock
Flex Sander Polisher Handle
PartSelect Number PS10355597
Manufacturer Part Number 333565
This plastic handle is specially designed to provide user with a comfortable grip for operating the Flex orbital polisher. It is an authentic OEM sourced item that is sold individually. Please note the screws used to secure this handle are sold separately, they will require a hex key also known as an allen wrench to complete the repair.
Your Price
$36.26
In Stock
Flex Sander Polisher Cord 16-2 120v
PartSelect Number PS10354911
Manufacturer Part Number 218235
It is a genuine manufacturer-sourced replacement 120V cord which is specially designed for use with Flex power tools. This is an identical replacement for a missing or damaged power cord which came with the new equipment. The cord is hardwired to the unit in order to supply power from a standard U.S. outlet, please note this high-quality rubber insulated component which is sold individually. Keep in mind the strain relief is sold separately.
Your Price
$78.20
On Order
Flex Sander Polisher Electronic Module 120v
PartSelect Number PS10355448
Manufacturer Part Number 292990
The electronic module attaches to the switch and is made of plastic and metal. This item is available as an individual replacement part. This is an original Flex part for use in orbital polishers. A screwdriver may be necessary during the installation of this item. It may become broken and will need to be replaced.
Your Price
$7.53
On Order
Flex Sander Polisher Carbon Brush (sold Individuall
PartSelect Number PS10354895
Manufacturer Part Number 211710
The carbon brush attaches to the motor housing. It is made of metal and plastic and is sold individually. This is a genuine OEM sourced part which is specially designed for use with Flex grinders, polishers, and drills. During the installation process, a screwdriver might be needed to replace this item. Over time this part may break and will need to be replaced.
Flex Sander Polisher Appliance Types
Popular Flex Sander Polisher Models
Below are the most popular Flex Sander Polisher models we have. Enter your model number in the search box to find your model.
- XC3401VRG 6" Orbital Polisher
- LW1503 (A)
- LW1503 5" Wet Polisher w/ Central Water Feed
- L1506VR 5" Variable Speed Sander/Polisher
- LRP1503VRA Pipe Sander/Polisher
- LK603VE Variable Speed Polisher
- LK603VVB 9" Variable Speed Polisher
- LK302VE 7" Variable Speed Polisher
- L3403VRG Lightweight Rotary Polisher
- L3406VRG 5" Variable Speed Sander/Polisher
- LCP1703VR 3 Headed Polisher
- PE14-3125 (A)
- PE14-2150 Polishflex, Variable-Speed Polisher With A High Torque
- L12-3100WET Variable Speed 5" Wet Polisher
- LW2402A 110V Polisher
- XFE15150180-EC (A)
- XCE8125180-EC (A)
- L1503VR 5" Variable Speed Sander/Polisher
- L1106VE 5" Variable Speed Sander/Polisher Polisher
- LW603VR 5" Variable Speed Wet Polisher