Demolition Hammer Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Demolition Hammer Parts
Your Price
$27.13
In Stock
Demolition Hammer Carbon Brush Set
PartSelect Number PS10156646
Manufacturer Part Number CB204
Set of 2 Carbon Brushes with wire leads and brush springs attached. The set contains genuine Makita replacement parts, and comes packaged in a Makita retail box. This brush set will fit the Makita tools listed at the bottom of the page. • Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.
Your Price
$9.48
In Stock
Demolition Hammer Brush Service Kit
PartSelect Number PS10122270
Manufacturer Part Number 22-18-6025
This is a genuine brush set designed for use with Milwaukee rotary hammers. This assembly includes two (2) carbon brushes with lead wires attached. Please note brush holders are sold separately. Due to prolonged contact with an armature brushes will gradually wear down and will require replacement. It is advised to replace both brushes at the same type. To complete this repair you would need a screwdriver. • Make sure the unit is unplugged • Remove screws from the housing to gain access to the armature and brushes • Remove old brushes and secure the new ones in brush holders • Re-assemble and test the tool
Your Price
$6.15
In Stock
Demolition Hammer Cord Protector
PartSelect Number PS10131782
Manufacturer Part Number 44-76-0210
This cord protector is a genuine Milwaukee replacement part and is sold individually. Cord Protectors are designed to slide onto your cord and fit securely at the end, where it's firm rubber will protect the base of the cord from getting bent and pinched, which can expose the wires and become a safety hazard.
Your Price
$9.74
In Stock
Demolition Hammer Carbon Brush Set
PartSelect Number PS10156644
Manufacturer Part Number CB175
Genuine Manufacturer Sourced replacement part. This item is made out of Carbon with a Lead Wire attached. This item includes Two (2) Carbon Brushes per order. Please note Brush Holder and Spring are Sold Separately. Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. You would need a Hex Key/Allen Wrench to open the Housing to gain access to replace Carbon Brush.
Your Price
$6.49
In Stock
Demolition Hammer Collet
PartSelect Number PS10129511
Manufacturer Part Number 42-77-0400
This is a genuine Milwaukee Collet for using bits with 1/8-inch arbors. Due to prolonged, heavy use a collet may need to be replaced. Use Collet Nut Wrench Part Number: 45-96-0400 to remove the Collet Nut Part #: 44-40-0770.
Your Price
$6.15
In Stock
Demolition Hammer Dust Cap
PartSelect Number PS10129123
Manufacturer Part Number 42-52-5262
This is an authentic Milwaukee replacement part manufactured for use with rotary hammers. The special dust cap is used to prevent debris from entering the sleeve. This dust cap is available as an individual replacement part, please see model diagram for associative parts.
Your Price
$8.56
On Order
Demolition Hammer Carbon Brush Set
PartSelect Number PS11885917
Manufacturer Part Number CB351
This is a Genuine Manufacturer Sourced replacement part used on Makita Rotary Hammers. Includes Two (2) Carbon Brushes with Lead Wires attached. Please note Brush Holders and Springs are Sold Separately. Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. It is recommended to replace both brushes at the same time. You would need a Screwdriver and Pliers to complete this job.
Your Price
$17.12
In Stock
Demolition Hammer Switch
PartSelect Number PS10123482
Manufacturer Part Number 23-66-0177
This Trigger switch has 4 internal terminals. This authentic Milwaukee replacement part is sold individually. rnrnSwitches are commonly replaced parts in power tools. A switch handles all on/off and variable speed functions. They also have a role in electric breaking; they can momentarily reverse electrical polarity. Because switches use mechanical internals, they tend to degrade and wear out over time, eventually requiring replacement. Some common signs of a broken or failing switch are:rn • The tool will not start when you use the switch, or it requires multiple tries to turn on, until eventually it refuses to start at all.rn • The variable speed function and electric braking aren't working properly.
Your Price
$40.05
In Stock
Demolition Hammer Speed Control
PartSelect Number PS19501156
Manufacturer Part Number 16072335CW
Speed Control
Your Price
$6.15
In Stock
Demolition Hammer C-ring
PartSelect Number PS11878394
Manufacturer Part Number 44-90-0014
This c-ring is supplied directly from the original equipment manufacturer. The metal ring is compatible with the Milwaukee 1" D-Handle Rotary Hammer. This protective part is fitted between the chuck sleeve and the ball plate. Although the c-ring is sold individually, two are needed for the hammer. A screwdriver is needed for the replacement.
Related Demolition Hammer Parts
- Demolition Hammer Hardware
- Demolition Hammer Brushes
- Demolition Hammer Bearings
- Demolition Hammer Handles
- Demolition Hammer Seals and Gaskets
- Demolition Hammer Switches
- Demolition Hammer Caps and Lids
- Demolition Hammer Engines
- Demolition Hammer Springs and Shock Absorbers
- Demolition Hammer Power Cords
- Demolition Hammer Transmissions and Clutches
- Demolition Hammer Latches
- Demolition Hammer Wheels and Rollers
- Demolition Hammer Wire Plugs and Connectors
- Demolition Hammer Spindles
Popular Demolition Hammer Models
Below are the most popular Demolition Hammer models we have. Enter your model number in the search box to find your model.
- 11316EVS Demolition Hammer
- D25980 68 Lbs. Breaker Hammer
- D25980 Demolition Hammer
- 11264EVS 11264evs
- 11264EVS 11264evs
- 11264EVS 1-5/8 in. SDS-Max Rotary Hammer
- HM1307CB 35 lb. Demolition Hammer
- HM1810 Breaker Hammer
- 11245EVS Rotary Hammer
- 11321EVS 12 Lb. SDS-Max Demo Hammer
- 11306 (06034) Demolition Hammer
- HM1203C 20 lb. Demolition Hammer
- 11304 (06139) Demolition Hammer
- GSH27 Demolition Hammer
- GSH27 Demolition Hammer
- GSH27 Demolition Hammer
- GSH27 Demolition Hammer
- BH2760VC Demolition Hammer
- BH2770VCD Demolition Hammer
- 11316 Demolition Hammer