Shaper Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Shaper Parts
Your Price
$37.36
On Order
Shaper Roller
PartSelect Number PS10320282
Manufacturer Part Number 1347963
It is an authentic item which is supplied by the original equipment manufacturer for use with Delta stock feeder shapers. The roller helps to feed the workpiece through the equipment. It is a high-quality replacement for a damaged or a missing component that was installed on a new unit. Refer to the owners manual and the diagrams of your model for the correct installation of this roller. You will need a screwdriver to remove the guard in order to perform this repair. One durable rubberized roller is included.
Your Price
$62.28
In Stock
Shaper Roller
PartSelect Number PS10316720
Manufacturer Part Number 1340360
The roller attaches to the cover with the washer and the cap screw. This part is an OEM from Delta for use in stock feeder shapers. It is made out of metal and hard rubber and will need to be replaced if it stops turning. An allen wrench will be needed to replace this wheel. Keep in mind that this part is available as an individual replacement even though multiple rollers may be needed.
Your Price
$243.02
In Stock
Shaper On/off Switch (3hp 1ph. 230 Vo
PartSelect Number PS10463239
Manufacturer Part Number 6816292
This on/off switch and motor starter is designed for use with 3-horsepower, single-phase machines operating at 230 volts. It controls power to the equipment and includes built-in safety features such as overload protection. Engineered for durability and reliability, it is commonly used in industrial and woodworking applications. Replacement may be necessary if the machine fails to start, experiences inconsistent power delivery, or shows signs of electrical wear. Installation should be performed with the power disconnected and may require basic electrical knowledge.
Your Price
$24.91
On Order
Shaper Bearing (for Recent Models Onl
PartSelect Number PS10329672
Manufacturer Part Number 920040107273
It is an authentic item that is supplied directly from original equipment manufacturer for use with Delta power equipment. This replacement bearing helps to secure the spindle while allowing it to rotate with minimal friction. For correct location and use of this item make sure to check appropriate diagrams of your equipment. Please note this durable metal bearing is sold individually.
Your Price
$10.38
In Stock
Shaper Key
PartSelect Number PS10329808
Manufacturer Part Number 927030102650S
The key attaches to the shaft and is made out of metal. This item is available individually. This is a genuine replacement part sourced from the original manufacturer for use with saws, drills, jointers, and shapers made by Delta. When replacing this part a set of pliers might be required during the installation process. It will require replacing if it becomes bent or broken.
Your Price
$105.77
On Order
Your Price
$10.18
In Stock
Shaper 115v Cord
PartSelect Number PS18986769
Manufacturer Part Number 825713
This is a Porter Cable replacement part designed for use with many power tools. The 115V cord is constructed of metal wiring encased in plastic and durable rubber. The cord is designed to connect the device to electricity once plugged into an outlet. This part is sold individually. Soldering tools are needed to make the proper replacement. Please refer to manual and diagrams for specific repair instructions.
Your Price
$34.09
In Stock
Shaper V-belt
PartSelect Number PS10517167
Manufacturer Part Number VB-M23
This is a genuine OEM sourced v-belt that is specially designed for Jet and Wilton power equipment. This is the belt that connects to the motor pulley and helps to drive the spindle. This item is made from durable rubber material and it is sold individually. You would need a set of screwdrivers to complete this repair.
Your Price
$31.14
In Stock
Shaper Handle
PartSelect Number PS10322076
Manufacturer Part Number 406030330001S
This handle is an OEM direct from Delta. The handle is made for use with a variety of power tools. The metal handle allows the operator to make the needed adjustments for projects. This handle is sold individually. A screwdriver, pliers, socket and wrench set are often required for the proper installation. Please refer to the specific manual for further repair instructions.
Your Price
$6.30
In Stock
Shaper Washer, 1" Spindle .087
PartSelect Number PS10458956
Manufacturer Part Number 3840004
This is an OEM part sourced directly from the manufacturer. The spindle washer is designed for use in Powermatic shapers. This part is made of metal, and is used in securing the spindle assembly. You will require a wrench when replacing this part. This item is sold individually.
Related Shaper Parts
- Shaper Hardware
- Shaper Switches
- Shaper Bearings
- Shaper Wheels and Rollers
- Shaper Spindles
- Shaper Handles
Popular Shaper Models
Below are the most popular Shaper models we have. Enter your model number in the search box to find your model.
- 27 Spindle Shaper
- 25A 3HP 230V Spindle Shaper
- 25A 5HP 230V Spindle Shaper
- PM2700 Shaper, 3HP, 1PH, 230V
- PM2700 Shaper, 5HP, 1PH, 230V
- PM2700 Shaper, 5HP, 3PH, 230/460V
- 695 Router/Shaper Table
- 29 5HP 230/460V Shaper
- 26 Shaper
- 696 Router/Shaper Table
- TS29 Tilting Sliding Spindle Shaper
- SH100 Delta Sh100 Shaper
- SH100 Bench Shaper
- J-43-375 Shaper
- J-43-375 Shaper
- 36-856 Stock Feeder Shaper
- 43-495X Industrial Shaper
- 43-375 Shaper
- 43-370 Wood Shaper
- 36-835 Stock Feeder Shaper