Delta Shaper Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Delta Shaper Parts
Your Price
$41.88
On Order
Delta Shaper Roller
PartSelect Number PS10320282
Manufacturer Part Number 1347963
It is an authentic item which is supplied by the original equipment manufacturer for use with Delta stock feeder shapers. The roller helps to feed the workpiece through the equipment. It is a high-quality replacement for a damaged or a missing component that was installed on a new unit. Refer to the owners manual and the diagrams of your model for the correct installation of this roller. You will need a screwdriver to remove the guard in order to perform this repair. One durable rubberized roller is included.
Your Price
$63.98
In Stock
Delta Shaper Roller
PartSelect Number PS10316720
Manufacturer Part Number 1340360
The roller attaches to the cover with the washer and the cap screw. This part is an OEM from Delta for use in stock feeder shapers. It is made out of metal and hard rubber and will need to be replaced if it stops turning. An allen wrench will be needed to replace this wheel. Keep in mind that this part is available as an individual replacement even though multiple rollers may be needed.
Your Price
$30.71
On Order
Delta Shaper Bearing (for Recent Models Onl
PartSelect Number PS10329672
Manufacturer Part Number 920040107273
It is an authentic item that is supplied directly from original equipment manufacturer for use with Delta power equipment. This replacement bearing helps to secure the spindle while allowing it to rotate with minimal friction. For correct location and use of this item make sure to check appropriate diagrams of your equipment. Please note this durable metal bearing is sold individually.
Your Price
$12.80
In Stock
Delta Shaper Key
PartSelect Number PS10329808
Manufacturer Part Number 927030102650S
The key attaches to the shaft and is made out of metal. This item is available individually. This is a genuine replacement part sourced from the original manufacturer for use with saws, drills, jointers, and shapers made by Delta. When replacing this part a set of pliers might be required during the installation process. It will require replacing if it becomes bent or broken.
Your Price
$34.90
In Stock
Delta Shaper Handle
PartSelect Number PS10322076
Manufacturer Part Number 406030330001S
This handle is an OEM direct from Delta. The handle is made for use with a variety of power tools. The metal handle allows the operator to make the needed adjustments for projects. This handle is sold individually. A screwdriver, pliers, socket and wrench set are often required for the proper installation. Please refer to the specific manual for further repair instructions.
Your Price
$6.40
In Stock
Delta Shaper Roll Pin
PartSelect Number PS10328508
Manufacturer Part Number 905010102732S
This is an authentic Delta replacement part sourced directly from the manufacturer. The roll pin is found in several different machines from Delta. This part is made of metal, and is put to different uses in the machine, depending on model. Please refer to the parts diagram to be sure of ordering the correct part. This part is sold individually.
Your Price
$6.40
In Stock
Delta Shaper Lock Nut
PartSelect Number PS18981419
Manufacturer Part Number 488871-00
This genuine manufacturer-sourced screw is made for Delta, Black and Decker and Porter Cable equipment. The nut is a standard hardware which may have multiple applications. Check the diagrams for your specific model to ensure the exact location and use of this part. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. One durable metal nut is included. A wrench will be needed to secure or remove it.
Your Price
$6.40
In Stock
Delta Shaper Hex Nut
PartSelect Number PS10327784
Manufacturer Part Number 902010101300S
This is an original Delta replacement part manufactured for use with drill presses and table saws. The special hex nut has multiple applications depending on the model drill press or table saw. This hex nut is sold as an individual replacement part, please see model diagram for part location and usage.
Your Price
$58.17
In Stock
Your Price
$78.28
In Stock
Delta Shaper Miter Gauge Assembly 63.38
PartSelect Number PS10319050
Manufacturer Part Number 1345226
This is an authentic replacement part manufactured for use with Delta table saws and routers. The miter gauge is used to change the angle of the cut. This miter gauge is as complete part assembly and is sold as an individual replacement part.
Delta Shaper Appliance Types
Popular Delta Shaper Models
Below are the most popular Delta Shaper models we have. Enter your model number in the search box to find your model.
- SH100 Delta Sh100 Shaper
- SH100 (Type 1) Bench Shaper
- 43-140 (Type 1) Shaper
- J-43-373 (Type 1) Shaper
- 36-856 (Type 2) Stock Feeder Shaper
- 36-839 (Type 1) Stock Feeder Shaper
- 43-386 (Type 1) Wood Shaper
- 36-855 (Type 2) Stock Feeder Shaper
- 43-384 (Type 1) Wood Shaper
- 43-372 (Type 2) Wood Shaper
- 43-379 (Type 1) Wood Shaper
- 43-384 (Type 2) Wood Shaper
- 43-205 (Type 1) Shaper
- 43-459 (Type 1) Industrial Shaper
- 43-445 Delta 43-445 Shaper
- 43-791 (Type 1) Industrial Shaper
- 36-836 (Type 1) Stock Feeder Shaper
- 36-865 (Type 2) Stock Feeder Shaper
- 43-385 (Type 2) Wood Shaper
- 43-419 (Type 1) Industrial Shaper