Cordless Drill Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Cordless Drill Parts
Your Price
$20.09
In Stock
Cordless Drill Housing Assembly
PartSelect Number PS12508695
Manufacturer Part Number N413423
This OEM housing assembly in your impact driver is the protective outer casing that encloses the internal components of the tool, providing structural support. The assembly consists of both the top and bottom sides and it operates using a 20-volt battery. To identify if the housing assembly is broken, look for visible cracks, fractures, or loose components. Excessive vibration or unusual noises during operation can also indicate a problem. To replace the housing assembly, remove all the screws and separate the case. Transfer all the components from the old case to the new one, ensuring switches like the forwards and reverse switch and power settings are properly aligned. Then, reassemble the case by putting all the screws back in using a screwdriver with a Torx bit. Note that the screws are sold separately from the housing.
Your Price
$6.58
In Stock
Cordless Drill Carbon Brush Set
PartSelect Number PS10156662
Manufacturer Part Number CB440
The brush box kit fits a variety of cordless gardening tools. *Please note: This part is sold individually. This assembly includes a carbon brush, spring and holder. Due to friction, carbon brushes are common replacement parts. If the functioning of your motor changes and does not work, then check if the brush is worn out or inspect the wire lead for cracks, burns and other damage. Replacing the brush can restore the motor and its functions. Refer to the manual provided by the manufacturer for further installation instructions.
Your Price
$17.16
In Stock
Your Price
$5.95
In Stock
Cordless Drill Steel Ball
PartSelect Number PS11929439
Manufacturer Part Number N089668
Genuine Dewalt replacement part, this item is sold individually. The N089668 Steel Ball is part of the chuck assembly of the Impact Drivers shown below. When you pull back the sleeve of the chuck assembly and insert your bit, the Steel Ball is the part that locks the bit in the chuck assembly.
Your Price
$5.15
In Stock
Cordless Drill Compression Spring
PartSelect Number PS11929265
Manufacturer Part Number N019351
This is an OEM authorized part. It is sold individually. This spring maintains pressure on the N078437 Sleeve, and the rest of the bit holder assembly, to keep the bit in the holder. If this part fails the bit cannot be held in the bit holder. It is commonly used in impact drivers, and is compatible with the impact drivers listed below.
Your Price
$27.50
In Stock
Cordless Drill Keyless Chuck
PartSelect Number PS17016934
Manufacturer Part Number 42-66-2608
This 1/2" keyless chuck is a high quality item designed for use with Milwaukee drill drivers. It is a genuine part that is sourced directly from original equipment manufacturer. This keyless chuck allows user to secure a drill bit without the need for any tools while the ratcheting action clicks the jaws tightly into place for reduced bit slippage. If your drill's bit retention is suffering or the rotation feels stiff a new chuck should fix the problem. This durable chuck is made from metal and hard plastic for prolonged life and it is sold individually. Please note that the screw to secure it is sold separately.
Your Price
$5.15
On Order
Cordless Drill Spring
PartSelect Number PS12527474
Manufacturer Part Number N437890
This is a spring designed to fit within the bit holder assembly of an impact driver, also known as an impact wrench. Positioned between the anvil and ring gear, this spring is accompanied by a washer and hog ring on each side to provide tension and maintain consistent pressure on the inserted bit within the holder. As a high-wear component, this spring will eventually wear out, resulting in a less secure grip on the bit by your driver and its hammer mechanism. This spring is equipped with a hook for secure attachment within the main housing. If the hook becomes damaged or misshapen, the entire spring will need replacement. To replace this spring, you will require a screwdriver and must partially disassemble the primary driver housing to access it.
Your Price
$15.66
In Stock
Cordless Drill Brush Card Assembly
PartSelect Number PS10122416
Manufacturer Part Number 22-22-2602
This OEM sourced replacement part is designed for Milwaukee drills/drivers. This assembly secures carbon brushes around the armature to provide stable contact. This assembly consists of: plastic holder ring, four (4) metal brush holders with springs and four (4) carbon brushes with lead wires attached. To replace this assembly you would need a screwdriver. • First remove screws holding the cover together • Carefully separate housing to gain access to armature and brush holder • Disconnect the wires • Remove the screws holding brush card assembly • Remove old brush holder and install the new assembly • Reassemble and test your tool
Your Price
$5.37
In Stock
Cordless Drill Retaining Ring - Ext
PartSelect Number PS10127118
Manufacturer Part Number 34-60-0725
This external retaining ring, also known as a snap ring or circlip, is supplied by the original manufacturer for use in impact drivers. It helps to secure the collar in the front housing assembly. It should be replaced if it is lost, damaged, or no longer able to remain securely attached. To replace the retaining ring, disassemble the front housing assembly and pull out the ring. Position the new ring in its place and reassemble the housing. Each retaining ring is sold individually.
Your Price
$19.67
Special Order
Cordless Drill Motor Assembly
PartSelect Number PS11877279
Manufacturer Part Number 23-30-0650
This is an authentic replacement part manufactured for use with Milwaukee ratchets. The motor assembly is used to power the ratchet and it the motor includes the gear that drives the planet gears. This motor assembly is available as an individual replacement part.
Related Cordless Drill Parts
- Cordless Drill Hardware
- Cordless Drill Handles
- Cordless Drill Brushes
- Cordless Drill Bearings
- Cordless Drill Springs and Shock Absorbers
- Cordless Drill Caps and Lids
- Cordless Drill Seals and Gaskets
- Cordless Drill Motors
- Cordless Drill Hoses and Tubes
- Cordless Drill Switches
- Cordless Drill Latches
- Cordless Drill Wire Plugs and Connectors
- Cordless Drill Knobs
- Cordless Drill Panels
- Cordless Drill Transmissions and Clutches
- Cordless Drill Gears
- Cordless Drill Spindles
- Cordless Drill Manuals and Literature
- Cordless Drill Dispensers
- Cordless Drill Lights and Bulbs
Popular Cordless Drill Models
Below are the most popular Cordless Drill models we have. Enter your model number in the search box to find your model.
- 2375 TYPE 1 (F01200) 9.6 V Cordless Drill
- DCD771 20V Max Cordless Compact Drill/Driver
- 11304 Versapak Combo Kit
- 6225 Drill
- 3310 Cordless Drill
- 3310 Cordless Drill
- 3310 Cordless Drill
- 1300 Cordless Drill / Driver
- 2480 TYPE 1 (F01202) 12 V Cordless Drill
- 3305 Cordless Drill
- DCD996B Cordless Drill/Driver Power Tool
- XPH06 18V LXT Lithium-Ion Cordless 1/2" Hammer Driver-Drill Kit
- 820 Cordless 9.6V Drill
- BDF452 18V LXT Lithium-Ion Cordless 1/2" Driver-Drill
- DCD793B Cordless Drill/Driver
- DCD780B 20v Drill/Driver
- DCD780B 20V Drill/Driver
- DCD780B 20v Drill/Driver
- P4001 18 Volt Drain Auger
- XFD01 18V LXT Lithium-Ion Cordless 1/2" Driver-Drill Kit