Table Saw Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Table Saw Parts
Your Price
$17.80
In Stock
Table Saw Brush
PartSelect Number PS10170261
Manufacturer Part Number 381028-08
Sold Individually. This carbon brush fits a variety of gardening and lawn tools. The brush is a common replacement part and can easily fix most motor malfunctions. This brush comes with a wire lead and a connection terminal. Inspect the wire lead for any damage and replace immediately if burns or cracks are noticed. Refer to the diagram provided by the manufacturer for installation instructions.
Your Price
$5.95
In Stock
Table Saw Carbon Brush
PartSelect Number PS16687899
Manufacturer Part Number N558583
This is a genuine Dewalt replacement part, it is sold individually. Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.
Your Price
$7.22
In Stock
Table Saw Brush
PartSelect Number PS10177102
Manufacturer Part Number 5140033-19
Genuine DeWalt replacement part Includes 1 Carbon Brush with wire lead and brush spring attached.rn • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.
Your Price
$11.54
In Stock
Table Saw Brush And Spring
PartSelect Number PS10166057
Manufacturer Part Number 145323-06
This Genuine OEM carbon brush is an essential replacement part designed for use with a variety of DeWALT and Black & Decker saws. Sold individually, this high-quality component is made to conduct electrical current within the motor, enabling efficient power transfer and tool performance. Over time, carbon brushes naturally wear down due to friction and electrical contact, which can lead to intermittent motor issues or failure to start.
Measuring 3/4 inch in length, 1/2 inch in width, and 1/4 inch in thickness, this brush is built to original specifications for a precise fit. When replacing carbon brushes, it’s important to also inspect the motor’s armature for signs of burns, cracks, or other damage, which may indicate a more serious issue. A hex key or screwdriver may be required for installation, depending on your tool model.
Fixes these symptoms
- Won't turn on
- See more...
Your Price
$11.22
In Stock
Table Saw Carbon Brush Set
PartSelect Number PS10156641
Manufacturer Part Number CB154
This is a genuine Makita replacement part that includes two carbon brushes with wire leads attached. Carbon brushes are essential components in power tools and are among the most commonly replaced parts due to regular wear from friction. Over time, worn brushes can cause a motor to run poorly, operate intermittently, or lose electric braking power. Replacing them can often restore your tool’s performance. A worn brush may appear cracked, pitted, burned, or worn down near the wire lead. It’s always best to replace both brushes at the same time, even if only one shows signs of wear. When installing new brushes, be sure to inspect the armature for any damage such as burns or cracks, which could indicate more serious motor issues.
Your Price
$13.91
In Stock
Table Saw Carbon Brush With Spring
PartSelect Number PS10176277
Manufacturer Part Number 5140011-85
This is an authentic OEM replacement part. Sold individually. Carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Because of this, carbon brushes are one of the most commonly replaced power tool parts. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems. This part is compatible with the models listed below.
Your Price
$36.89
In Stock
Table Saw Power Cord
PartSelect Number PS10169913
Manufacturer Part Number 330079-98
It is constructed with tough, thick outer rubber insulation for a long service life.
Power Cord Specifications:
• 2 Prongs
• 2 Wires
• 14 Gauge
• 10 Feet Long
Your Price
$41.51
In Stock
Your Price
$5.68
On Order
Table Saw Carbon Brush
PartSelect Number PS10076327
Manufacturer Part Number 0502025007
This is a Genuine Manufacturer Sourced replacement part. This is a Carbon Brush with Lead Wire attached and a Spring. This Brush is Sold Individually. Please note Brush Holder is Sold Separately. Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. It is recommended to replace both brushes at the same time. You would need a Screwdriver and Pliers to complete this job.
Your Price
$21.08
In Stock
Table Saw Handwheel
PartSelect Number PS10178360
Manufacturer Part Number 5140117-77
This replacement hand wheel is sourced directly from original equipment manufacturer. It is a genuine part designed for use with Dewalt table saws. This is the hand wheel that allows you to adjust the blade height. It is made out of metal with a plastic knob. Please note the bevel handle is sold separately. To complete this repair you would need a socket wrench. • Remove the handle bolt • Remove old hand wheel • Secure the new assembly with a bolt
Related Table Saw Parts
- Table Saw Hardware
- Table Saw Brushes
- Table Saw Bearings
- Table Saw Brackets and Flanges
- Table Saw Caps and Lids
- Table Saw Switches
- Table Saw Wheels and Rollers
- Table Saw Belts
- Table Saw Legs and Feet
- Table Saw Power Cords
- Table Saw Blades
- Table Saw Handles
- Table Saw Seals and Gaskets
- Table Saw Drawers and Glides
- Table Saw Latches
- Table Saw Knobs
- Table Saw Wire Plugs and Connectors
- Table Saw Springs and Shock Absorbers
- Table Saw Manuals and Literature
- Table Saw Transmissions and Clutches
- Table Saw Hoses and Tubes
- Table Saw Dipsticks
- Table Saw Pulleys
- Table Saw Hinges
- Table Saw Lights and Bulbs
- Table Saw Gears
- Table Saw Circuit Boards and Touch Pads
- Table Saw Bags
- Table Saw Starters
- Table Saw Motors
- Table Saw Spindles
- Table Saw Electronics
- Table Saw Valves
Popular Table Saw Models
Below are the most popular Table Saw models we have. Enter your model number in the search box to find your model.
- DWE7480 10" Compact Job Site Table Saw
- DWE7480 Table Saw
- DW745 10" Table Saw
- DW745 Table Saw
- DW745 Table Saw
- R4513 Table Saw
- DWE7491RS 10in Jobsite Tbl Saw
- DWE7491RS 10" Jobsite Table Saw
- DWE7491RS 10in Jobsite Tbl Saw
- 66 10-Inch Table Saw
- PM2000 Pm2000 1ph Table Saw Parts With 50inch Accu-Fence System (1792010k)
- PM2000 Pm2000 1ph Table Saw Parts With 30inch Accu-Fence System (1792012k)
- PM2000 Pm2000 3ph Table Saw Parts With 30inch Accu-Fence System (1792007k)
- PM2000 Pm2000 3ph Table Saw Parts With 50inch Accufence And Workbench (1792018k)
- PM2000 10-inch Cabinet Saw
- PM2000 Pm2000 1ph Table Saw Parts With 50inch Accufence And Workbench (1792016k)
- PM2000 Pm2000 3ph Table Saw Parts With 30inch Accu-Fence System And Rout-R-Lift (1792008k)
- PM2000 Pm2000 1ph Table Saw Parts With 50inch Accu-Fence And Rout-R-Lift(1792011k)
- PM2000 10 in. 5HP 230V 1 Phase TEFC Cabinet Saw
- PM2000 Pm2000 3ph Table Saw Parts With 50inch Accu-Fence System And Rout-R-Lift (1792006k)