Jet Table Saw Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Jet Table Saw Parts
Your Price
$44.51
In Stock
Jet Table Saw Ball Bearing
PartSelect Number PS10463888
Manufacturer Part Number BB-6203ZZ
Genuine Manufacturer Sourced replacement part used on a variety of Power Tools. This part is made out of Metal and it is sold individually. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. This reduces wear on the tool and allows it to run smoothly. Bearings experience constant wear when the tool is in operation from pressure, heat, vibration and friction. Because of this, many Bearings need periodic maintenance or replacement.
Your Price
$10.36
In Stock
Jet Table Saw Pad
PartSelect Number PS10465206
Manufacturer Part Number JWBS18-434
This pad is an OEM part direct from Powermatic. Constructed of soft material, this item is compatible with several band saw devices. The pad is fitted onto the fence, providing protection from abrasion. The pad is sold individually. No tools are required for the replacement.
Your Price
$48.56
In Stock
Jet Table Saw Wheel Protector
PartSelect Number PS10516474
Manufacturer Part Number 5782691
This is an authentic replacement wheel tire for Wilton and Jet band saws. It is supplied directly from original equipment manufacturer and it is sold individually. Its purpose is to provide a stable grip for the saw blade. When attaching the new tire on a band saw wheel, it may appear too be too small, however it really is not. These tires when new are typically approximately two (2) or more inches shorter than the old tire. Tires are supposed to fit very tightly against the bad saw wheel. As the tire ages, the rubber hardens allowing for the blade to slip. Note, it is a good idea to put the new tire in hot/warm water to heat it up just enough to make it pliable enough to stretch. Its advised to have two people in the stretching process.
Your Price
$28.17
In Stock
Jet Table Saw Ball Bearing
PartSelect Number PS10463896
Manufacturer Part Number BB-6205ZZ
This ball bearing is assembled by the original manufacturer. It is used in a variety of Powermatic, Jet, and Wilton power tools. Ball bearings serve to protect moving parts from wearing each other down and from damage due to incorrect position/direction. This is a high-wear part and will need regular replacement. This part is sold individually.
Your Price
$40.47
In Stock
Jet Table Saw Ball Bearing
PartSelect Number PS10463882
Manufacturer Part Number BB-6201VV
This replacement part is supplied by the original equipment manufacturer for use with Powermatic and Jet power equipment. Ball bearings are generally used to reduce friction between rotating parts, please make sure to check appropriate diagram of your model for the correct location and use of this hardware. Over time the rollers may begin to wear out restricting the movement and eventually requiring a replacement to maintain peak performance. This high-quality part is made of durable metal and it is sold individually.
Your Price
$19.27
In Stock
Jet Table Saw Table Insert
PartSelect Number PS10516515
Manufacturer Part Number 5783471
This item is a genuine part that has been sourced from the original manufacturer to be used with verticle bandsaws from Wilton and Jet. The durable plastic insert fits into the cap in the table where the blade passes through the table. The insert is used to reduce the gap around the blade in order to better support the material as it is being cut. Inserts wear down from normal use, and will eventually need to be replaced to maintain clean accurate cuts. This part is priced as a single item, please note tools may not be necessary to install the insert.
Your Price
$48.56
In Stock
Jet Table Saw Blade Guide-carbide
PartSelect Number PS10516511
Manufacturer Part Number 5783391
This part is an OEM from the Wilton manufacturer. The carbine blade guard is compatible with many band saw devices. The plastic item is fitted on each side of the saw head's support bracket, keeping the blade straight for cutting projects. A pair of pliers and a screwdriver may be helpful for making the repair. The carbine blade guard is sold individually.
Your Price
$23.73
In Stock
Jet Table Saw Linking Plate
PartSelect Number PS10394926
Manufacturer Part Number PM2000-305
This is an authentic OEM component from Jet. The linking plate helps to secure the blade guard side shields. A wrench and hex key are necessary for the replacement. The metal linking plate is sold individually.
Your Price
$16.30
In Stock
Jet Table Saw Lock Plate
PartSelect Number PS10465205
Manufacturer Part Number JWBS18-433W
The lock plate goes between the lock handle and the pad. This is an original Powermatic and Jet part for use in bandsaws. It may require a screwdriver during installation. The plate may become broken and will need to be replaced. This item is made of metal and sold individually.
Your Price
$45.86
In Stock
Jet Table Saw Ball Bearing
PartSelect Number PS10463885
Manufacturer Part Number BB-6202VV
This is an original replacement part manufactured for use with woodworking equipment. Bearings are used to reduce friction between a moving part assemblies. This sealed bearing has multiple uses across different types of equipment, please see model diagram for part location and compatibility. This ball bearing is sold as an individual replacement part.
Jet Table Saw Appliance Types
Popular Jet Table Saw Models
Below are the most popular Jet Table Saw models we have. Enter your model number in the search box to find your model.
- 414559 Jet 414559 Parts
- 413410 Jet 413410 Parts
- 414560 Jet 414560 Parts
- XACTA Deluxe Saw
- XACTA Super Deluxe Saw
- 414468 Jet 414468 Parts
- 414457 Jet 414457 Parts
- 708536PK Jet 708536pk Parts
- 727200B Jet 727200b Parts
- 414459 Jet 414459 Parts
- 414558 Jet 414558 Parts
- 708482K 708482k_jps-10 Table Saw
- 708100 Jet 708100 Parts
- 708674PK Jet 708674pk Parts
- 707212 Jet 707212 Parts
- 414500K Jet 414500k Parts
- 725000K Jet 725000k Parts
- JPS-10TS 10-inch Table Saw
- 707000 Jet 707000 Parts
- 414240 Jet 414240 Parts