Wilton Table Saw Parts

Wilton Table Saw Wheel Protector This is an authentic replacement wheel tire for Wilton and Jet band saws. It is supplied directly from original equipment manufacturer and it is sold individually. Its purpose is to provide a stable grip for the saw blade. When attaching the new tire on a band saw wheel, it may appear too be too small, however it really is not. These tires when new are typically approximately two (2) or more inches shorter than the old tire. Tires are supposed to fit very tightly against the bad saw wheel. As the tire ages, the rubber hardens allowing for the blade to slip. Note, it is a good idea to put the new tire in hot/warm water to heat it up just enough to make it pliable enough to stretch. Its advised to have two people in the stretching process.

Wilton Table Saw Table Insert This item is a genuine part that has been sourced from the original manufacturer to be used with verticle bandsaws from Wilton and Jet. The durable plastic insert fits into the cap in the table where the blade passes through the table. The insert is used to reduce the gap around the blade in order to better support the material as it is being cut. Inserts wear down from normal use, and will eventually need to be replaced to maintain clean accurate cuts. This part is priced as a single item, please note tools may not be necessary to install the insert.

Wilton Table Saw Blade Guide-carbide This part is an OEM from the Wilton manufacturer. The carbine blade guard is compatible with many band saw devices. The plastic item is fitted on each side of the saw head's support bracket, keeping the blade straight for cutting projects. A pair of pliers and a screwdriver may be helpful for making the repair. The carbine blade guard is sold individually.

Wilton Table Saw Flat Washer, M8 This manufacturer-sourced replacement flat washer is an authentic hardware which is specially designed for use with power tools. Its purpose is to help distribute the pressure evenly between connected parts, this washer has multiple applications depending on the model of our unit, make sure to check appropriate diagrams for correct location and use. This part is made of high-quality metal and it is sold individually.

Wilton Table Saw Blade-saw-metal Cutting This part is available as in individual replacement. The metal cutting saw blade goes around the upper wheel and the lower wheel. While replacing this part a wrench may be needed. If this part becomes broken it will need to be replaced. This is a replacement part directly sourced from the manufacturer for use in bandsaws made by Wilton and Jet.

Wilton Table Saw Bracket-support This is an authentic OEM sourced part which is specially designed for use with Jet and Wilton band saws. It is an identical replacement for a missing or a faulty bracket-support that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part. This high-quality bracket-support is made of durable metal and is sold individually, keep in mind the hardware to secure it is sold separately.

Wilton Table Saw Guard-blade This is an authentic OEM supplied part which is made for use with Jet and Wilton band saws. The purpose of it is to direct dust and debris away from the user as well as to provide protection for the blade. It is an identical replacement for a missing or a faulty guard-blade that was installed on a new unit. Please check the owners manual and the diagrams of your model for the exact location and the correct installation of this component. One durable guard is included.

Wilton Table Saw Nut-square It is an authentic part that is supplied by the original manufacturer for use with Jet and Wilton bandsaws. The nut-square is an important component of the tensioning mechanism. This is an identical replacement for a missing or faulty hardware that was installed on a new unit. Please make sure to refer to the appropriate diagrams for your model for the correct location and application of this component. Keep in mind this high-quality part is made of durable metal and is sold individually.

Wilton Table Saw Knob

Wilton Table Saw Flat Washer, M4 This is a genuine replacement part that is sourced from the original manufacturer for use with woodworking power tools. The metal flat washer is commonly used disperse pressure put on a part assembly by a nut or bolt across a wider surface area. This flat washer is available as an individual replacement part.