Ridgid Table Saw Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Ridgid Table Saw Parts
Your Price
$6.72
In Stock
Ridgid Table Saw Carbon Brush
PartSelect Number PS10076327
Manufacturer Part Number 0502025007
This is a Genuine Manufacturer Sourced replacement part. This is a Carbon Brush with Lead Wire attached and a Spring. This Brush is Sold Individually. Please note Brush Holder is Sold Separately. Carbon motor brushes are one of the most commonly replaced power tool components. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. It is recommended to replace both brushes at the same time. You would need a Screwdriver and Pliers to complete this job.
Your Price
$17.91
In Stock
Ridgid Table Saw Contractor Saw Switch T2 Model
PartSelect Number PS17092795
Manufacturer Part Number DPEC005673
Your Price
$35.74
In Stock
Ridgid Table Saw Start Capacitor 125 Vac 324 Mf
PartSelect Number PS10332333
Manufacturer Part Number DPEC003210
This start capacitor provides the additional electrical boost required to start motors efficiently. It is commonly replaced when motors struggle to start, hum, or shut off unexpectedly.
Your Price
$63.98
On Order
Ridgid Table Saw Riving Knife
PartSelect Number PS17093065
Manufacturer Part Number DPEC006136
This is a genuine Delta replacement part that has been sourced from the original manufacturer to be used with table saws. The metal riving knife is a safety item that is used to separate material after the cut to prevent kickback. This item is sold as an individual replacement part.
Your Price
$6.30
In Stock
Ridgid Table Saw Ball Bearing (6201 Zlu C3 Srl/p6 Z3 V3)
PartSelect Number PS16237257
Manufacturer Part Number 089110101209
This replacement bearing is an authentic component which is supplied directly from the original equipment manufacturer for use with Ryobi table saws. Bearings are used to reduce friction between rotating parts, please make sure to check appropriate diagrams of your unit for the correct location and use of this hardware. Over time bearings tend to wear out and may begin to fail eventually requiring replacement to maintain peak performance. This part is made of high-quality metal and it is sold individually.
Your Price
$133.03
In Stock
Ridgid Table Saw Run Capacitor 370 Vac 40uf
PartSelect Number PS17092106
Manufacturer Part Number DPEC003209
This run capacitor is a genuine replacement designed for continuous duty in Delta power tools, including select table saw models. Rated at 370 VAC with a capacitance of 40 µF, it helps maintain a steady voltage level and improves motor efficiency during operation. Built for durability, this component ensures reliable performance in demanding environments. For safety, disconnect power before installation and verify compatibility with your specific tool model.
Your Price
$30.71
On Order
Your Price
$6.30
In Stock
Ridgid Table Saw Leveling Foot
PartSelect Number PS10105311
Manufacturer Part Number MH060008
This authentic part is supplied by the original equipment manufacturer for use with Ridgid table saws. The leveling foot is connected beneath the leg, it can easily be adjusted to ensure a level work surface. It provides an identical replacement for a missing or a faulty part that was installed on a new unit, please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality leveling foot is made of durable metal with plastic and is sold individually.
Your Price
$24.69
In Stock
Ridgid Table Saw Dado Insert
PartSelect Number PS10076900
Manufacturer Part Number 080035003093
This replacement dado insert is a genuine Ridgid item, not an aftermarket imitation. It is sourced directly from original equipment manufacturer for use with table saws. The purpose of an insert is to reduce splintering on the cuts. It also helps to prevent pieces of wood from getting stuck between the blade and the plate. Please note, one plastic dado insert is included per order.
Your Price
$6.40
In Stock
Ridgid Table Saw Sliding Tube End Cap
PartSelect Number PS10332223
Manufacturer Part Number DPEC002928
Ridgid Table Saw Appliance Types
Popular Ridgid Table Saw Models
Below are the most popular Ridgid Table Saw models we have. Enter your model number in the search box to find your model.
- R4513 Table Saw
- R4512 10 inch Table Saw
- R4510 Portable Table Saw
- R4092 10" Table Saw
- R4516 Table Saw
- R45101 Table Saw
- TS3650 10" Table Saw
- R4550 Portable Table Saw
- TS24001 10" Table Saw
- R4511 10-inch Table Saw
- R4560 Contractor Saw
- R4520 10-Inch Table Saw
- R45171 Table Saw 7-26-18 (Rev:05)
- TS24241 10" Table Saw
- TS2400 10" Table Saw
- R4540 Portable Table Saw
- TS3660 10" Table Top Saw
- TS24240 10" Table Saw
- TS2410LS 10" Table Saw
- TS2400LS 10" Table Saw