Dehumidifier Parts

Shop By Brand Shop By Part Type

Popular Dehumidifier Parts

Your Price
$7.76
  In Stock
Hose Clamp
★★★★★
★★★★★
(1)
PartSelect Number PS11743008
Manufacturer Part Number WP596669
This hose clamp is used in a wide variety of household appliances. Most often it is found in washers, dishwashers, refrigerators, freezers, dehumidifiers, garbage disposals, or air conditioners. This clamp is used to securely attach a hose to another part of your appliance, which helps prevent leaks from those connections. Depending on the appliance, it can attach hoses to drain pumps, water inlet valves, pressure switches, and injector nozzles. We recommend you refer to model-specific diagrams for appropriate uses and exact placement. This hose clamp is made of metal, and is sold individually. To access and replace this part you will need a nut driver, pliers, and screwdrivers. Before you begin any repair work, make sure you have unplugged your appliance, and shut off the water supply if applicable.
Fixes these symptoms
Installation Instructions
jeff from lindenhurst, IL
Washing Machine was leaking water
Loosened the hose clamp, removed the injector valve and injector nozzle assembly, replaced both and tightened with new hose clamp. Fixed the problem for less than $20!! Washing machine is 20 years old and this was the first problem--hopefully it is now good for another 20 years! Read more...
Your Price
$7.76
  In Stock
Water Inlet Hose Washer
★★★★★
★★★★★
(2)
PartSelect Number PS11738697
Manufacturer Part Number WP16123
If your clothes washer is leaking, it is likely that there could be an issue with one of the hoses. If the hoses are in working order, you should check the washers connecting the hose to your unit. Rubber washers are tasked with enhancing the seal between the hose and washer. A faulty or damaged washer will not be able to perform this properly, and water will be able to leak from the poor connection. This OEM part is sold individually, so make sure you order the quantity that is needed. The washer measures 1 1/16 inches x 5/8 inches.
Fixes these symptoms
Installation Instructions
Jerome from Wichita Falls, TX
Cold water slow to fill tub
I started by shutting off the hot/cold water and unplugging the washer...from there, the back panel(secured with approx. eight bolts) was removed; it proved to be the project's most difficult task. The inlet valve was very easy to remove: removed a couple bolts that secured it to the back panel, disconnected the two electrical plugs and water fill hose. The new valve was installed by reversing the above steps; take note to follow the supplied directions as the electrical plugs must go on the valve in a prescribed manner. The back panel actually goes on easier than it comes off. When reinstalling back panel, be sure the water diverter is properly positioned before securing back panel. The diverter can be seen by opening the washer's lid...it's the plastic thing that channels water into the tub. After reassembly, new water supply hoses and washer were installed, moved washer back into place, plugged it in and all worked like new. Read more...
Your Price
$8.36
  In Stock
Hex Nut
★★★★★
★★★★★
(2)
PartSelect Number PS11742711
Manufacturer Part Number WP488130
This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, refrigerators, air conditioners, and dishwashers. It is a metal part with a threaded hole to fasten parts in the appliance together. It is common for this part to wear out; it is recommended to order a spare. To replace this part the tools needed are a nut driver or wrench. This nut features a built-in external tooth lock washer, which is used to help keep the nut in place.
Your Price
$13.72
  In Stock
Water Bucket Float
★★★★★
★★★★★
(15)
PartSelect Number PS3512331
Manufacturer Part Number WK11X10007
This is a float manufactured to fit into your dehumidifier. When the dehumidifier is in use and water is being absorbed from the air, the float detects the water level in your dehumidifier water bucket. When the appliance detects that the water bucket has reached its maximum level, it shifts the float switch to stop the appliance from dehumidifying so the bucket will not overfill. If your bucket has been underfilling or overfilling, you may need to replace this switch. This float is white in color and made entirely of plastic. This is a genuine replacement part sourced directly from the manufacturer.
Fixes these symptoms
  • Unit says bucket is full when it isn’t
  • Won’t stay on
  • See more...
Installation Instructions
Mitsue from NEW ORLEANS, LA
had to replace original water float as the connector broke off
my model is so old it is no longer part of the GE inventory but looking at the photos on line - which are very good and detailed - and chatting with on line help decided to go ahead and order and it fit perfectly Read more...
Your Price
$7.76
  In Stock
Float
★★★★★
★★★★★
(5)
PartSelect Number PS11738360
Manufacturer Part Number WP1172075
If the bucket is full indicator on your dehumidifier is on but the bucket is empty, you may have a problem with the float. If you notice that the float is warped or damaged, it should be replaced. This device is located near the bucket and prevents the dehumidifier from overflowing. You will need to open up the dehumidifier to complete this repair. This product is approximately 4 inches in length. Many of our customers have rated this repair as easy. To complete the repair simply remove the clips that hold the float in place, attach the new float, and replace the clips.
Installation Instructions
Steven from Owings Mills, MD
the dehumidifier was not shutting off when water level was full
replaced a piece of the plastic at the top of the bucket that seems to be the water gauge. this seems to be fixed. we are very happy Read more...
Your Price
$1.84
  In Stock
Red Indicator Light Lens
PartSelect Number PS2349641
Manufacturer Part Number 318250801
This indicator light lens protects bulbs in ranges, ovens, stoves, and humidifiers. The lens keeps the bulb from getting cracked, scratched, and damaged. It is 1 inch long and 1 inch wide. If your lens is defective or broken, or the bulb is easily getting damaged, replacing the lens can be a solution. Refer to the installation instructions provided by the manufacturer for further accurate guidance. Remember to unplug your appliance from the power source before starting this project and wear gloves to ensure your hands are protected.
Installation Instructions
Paul from SMITHTON, IL
The switch for one of the electric burners burnt
I shut POWER OFF FIRST and tested it be fore I started. I left all but one wire intact on the old switch and when the new one arrived I made sure it was the right one(it was) and then I just removed one wire at a time from old switch to the new one. After the install was complete turned power back on tested it and it worked. Good luck! Read more...
Your Price
$8.17
  On Order
FILTER
★★★★★
★★★★★
(2)
PartSelect Number PS16221556
Manufacturer Part Number 5304525520
Your Price
$37.51
  In Stock
Compressor Start Relay
PartSelect Number PS426380
Manufacturer Part Number 216594300
The compressor start relay attaches to the compressor in your refrigerator. If your refrigerator will not start, one of the most common parts to fail is the compressor start relay. Sometimes called the controller, this device is used to boost the compressor until the unit is running. Other common symptoms connected to start relays include: refrigerator will not start, will not cool, is making a clicking, humming or buzzing sound, or the compressor itself is warm to the touch. You may also smell a burnt plastic odor if the relay has failed. Shake the relay and listen for any rattling, as this is a sign that it is faulty.
Fixes these symptoms
Installation Instructions
Linda from Gurnee, IL
The compressor would not run.
I removed the cover, used a multimeter to test the compressor circuit, and found the compressor start relay to be defective.
Ordered a new one and installed it when it arrived.
Read more...
Your Price
$7.98
  In Stock
Turbo Fan
PartSelect Number PS3528580
Manufacturer Part Number 5900A20007B
This turbo fan is commonly used in the assembly of air conditioners and dehumidifiers. The fan is used to draw air through the unit and move it forward into your home. If your fan is cracked, broken, or damaged, it will impact the efficiency and effectiveness of your appliance. If your dehumidifier is loud during its cycle, or the coils are icing over, the turbo fan could be the issue. This fan assembly is made of black plastic, has an outside diameter of approximately 8 inches, and it is sold individually. This is an authentic OEM replacement part sourced directly from the manufacturer.
Your Price
$4.89
  In Stock
Speed Nut
PartSelect Number PS11742700
Manufacturer Part Number WP486692
The speed nut (also referred to as a condenser motor fan nut), fits onto the condenser fan motor. The motor for this fan turns on simultaneously with the evaporator and the compressor motors, so a malfunction in the condenser fan motor could cause your fridge to cycle on and off more frequently or run too warm, or too noisily. Make sure that the speed nut is properly attached and tight. Check the nut for any signs of wear or damage. If the nut is damaged and refuses to tighten, you should replace the part immediately. Remember to unplug your refrigerator before starting this repair.
Installation Instructions
Carol from Monroe, NY
Refrig making a lot of noise
The motor kit had only two wires coming out of it. The existing one in the refrig had 6. I spliced the 2 red to one black on the new part and 2 white to the other black wire on the new part. The two green I attached to a screw. I left the 6 wire harness in place just cut off the plug piece that went into the old motor, and spliced all my wires.
Worked great!
Read more...

Brands

Related Parts

Popular Dehumidifier Models

Below are the most popular Dehumidifier models we have. Enter your model number in the search box to find your model.