Maytag Dehumidifier Parts

Maytag Appliance Parts
Shop By Appliance Type

Popular Maytag Dehumidifier Parts

Your Price 6.32
  In Stock
Hex Nut
★★★★★
★★★★★
(2)
PartSelect Number PS11742711
Manufacturer Part Number WP488130
This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, refrigerators, air conditioners, and dishwashers. It is a metal part with a threaded hole to fasten parts in the appliance together. It is common for this part to wear out; it is recommended to order a spare. To replace this part the tools needed are a nut driver or wrench. This nut features a built-in external tooth lock washer, which is used to help keep the nut in place.
Your Price 26.84
  In Stock
Condensor Fan Blade - Black
PartSelect Number PS11757435
Manufacturer Part Number WPY01110041
This fan blade is used with some dehumidifiers. At just under 10 inches long, it is black and comes with a retaining clip and screw. This part may bend or break over time and will need to be replaced. If the fan blade is not working you will not hear the fan blowing air across the coils when it is turned on. This could cause the dehumidifier to freeze up. You will need to remove the front panel and take the motor out to access this part. This is an OEM part that comes right from the manufacturer.
Installation Instructions
William from Oriskany, NY
The old blade separated from the shaft.
Removed all screws from the outside case, then I had access to the motor. Removed 4 screws from the bracket holding the motor assembly in place, removed it from the case. Next I pulled off the broken fan part, installed the new blade and secured it with the supplied bracket. Next I installed the motor assembly in reverse with the 4 screws I removed earlier. I made sure the blade would move freely, no wire in the way. Also, when you remove the motor assembly you will have to remove the motor wires from their attachment points, but is easy, they are just "plugged" in. In any case I recommend you make a small drawing/schematic as to where the wires go for proper hookup later. The last thing is to put the case cover back on, line up the holes and insert the screws you removed earlier. The unit has been running like new now!! Read more...
CLIP- Complete
PartSelect Number PS2060907
Manufacturer Part Number 61005561
Your Price 6.32
  In Stock
Hex Nut
★★★★★
★★★★★
(2)
PartSelect Number PS11742711
Manufacturer Part Number WP488130
This hex nut is an authentic Whirlpool part that is sourced directly from the original equipment manufacturer, and will fit a variety of appliances including ovens, microwaves, refrigerators, air conditioners, and dishwashers. It is a metal part with a threaded hole to fasten parts in the appliance together. It is common for this part to wear out; it is recommended to order a spare. To replace this part the tools needed are a nut driver or wrench. This nut features a built-in external tooth lock washer, which is used to help keep the nut in place.
Your Price 26.84
  In Stock
Condensor Fan Blade - Black
PartSelect Number PS11757435
Manufacturer Part Number WPY01110041
This fan blade is used with some dehumidifiers. At just under 10 inches long, it is black and comes with a retaining clip and screw. This part may bend or break over time and will need to be replaced. If the fan blade is not working you will not hear the fan blowing air across the coils when it is turned on. This could cause the dehumidifier to freeze up. You will need to remove the front panel and take the motor out to access this part. This is an OEM part that comes right from the manufacturer.

Appliance Type

Popular Maytag Dehumidifier Models

Below are the most popular Maytag Dehumidifier models we have. Enter your model number in the search box to find your model.