Scroll Saw Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Scroll Saw Parts
Your Price
$10.65
In Stock
Scroll Saw Band Saw Table Insert
PartSelect Number PS10323790
Manufacturer Part Number 426020630001S
This is a table insert plate for your saw. It is attached to the table, and provides access to the blade. A table insert protects the rest of the unit by preventing wood from getting jammed under the blade during cutting. The slit in the insert plate allows for the saw blade to run smoothly. Before installing this part, unplug your saw.
Your Price
$21.20
In Stock
Scroll Saw Clamp Knob Assembly
PartSelect Number PS10168807
Manufacturer Part Number 286303-00
This is a genuine OEM sourced replacement part designed for use with Dewalt and Delta saws. The purpose of this part is to tighten the blade clamp assembly. It is made out of metal with plastic and it is sold individually.
Your Price
$24.35
In Stock
Scroll Saw Blade Chuck
PartSelect Number PS10178031
Manufacturer Part Number 5140099-98
Genuine Dewalt replacement part, this item is sold individually. This is a part of the blade holding assembly on the Scroll Saws listed below.>br>Along with the other parts shown in the parts diagram this will clamp the scroll saw blade and hold it in place.
Your Price
$36.46
In Stock
Scroll Saw Switch
PartSelect Number PS10177981
Manufacturer Part Number 5140092-86
This is an OEM replacement part used in Delta and DeWALT scroll saws. It is an on/off switch and is sold individually, separate from the speed control knob. It is plastic with metal terminals. Over time, mechanical parts such as these wear down and must be replaced. To complete this repair you will need a hex key/allen wrench. • Remove old switch by pressing tabs • Disconnect wires • Attach wires to the new switch • Reassemble and test the tool
Your Price
$9.17
In Stock
Scroll Saw Brush
PartSelect Number PS10168838
Manufacturer Part Number 286346-00
Genuine DeWalt replacement part Includes 1 Carbon Brush with wire lead and brush spring attached. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. • Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. • Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. • A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. • When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.
Your Price
$21.72
In Stock
Scroll Saw Air Nozzle
PartSelect Number PS10168812
Manufacturer Part Number 286311-00
This is an authentic OEM replacement part, guaranteed to fit the scroll saws listed below. This adjustable air nozzle/hose is used as a dust blower. It is connected to the bellows via the metal air pump cap. Nozzle attaches over the air pump cap's ball end. When installing this part it is recommended to heat the nozzle's connecting end until soft. Then just ease into place. This item is sold individually. A Torx screwdriver is used to remove the air pump cap for easier installation.
Your Price
$9.20
In Stock
Scroll Saw Short Sleeve
PartSelect Number PS10168800
Manufacturer Part Number 286294-00
The short sleeve helps to distribute pressure evenly between connected components. Over time it will wear out, get damaged or lost eventually requiring a replacement. This authentic manufacturer-sourced part is specially designed for use with DeWALT and Delta scroll saws. Check the diagrams for your model for the exact location and the correct application of this hardware. Keep in mind this high-quality short sleeve is made of durable metal and is sold individually.
Your Price
$12.94
In Stock
Scroll Saw Foot
PartSelect Number PS10168799
Manufacturer Part Number 286292-00
This part is guaranteed OEM, made to fit the DeWALT and Delta scroll saws listed below. This hold down foot is attached to the top mount via the black bar. Note that mounting/adjustment screw is sold separately. This foot is sold individually. Associated parts: • Top Mount, part # 286277-00 • Bar, part # 286291-00 • Screw, part # 286316-00
Your Price
$14.34
In Stock
Scroll Saw Bar
PartSelect Number PS10168798
Manufacturer Part Number 286291-00
This is a genuine OEM sourced replacement part that is intended to be used with scroll saws from DeWalt and Delta. The metal bar attaches to the top rocker mount and is used to support the foot that protects the blade. The bar will require a torx driver and hex driver to install, and the bar is priced as a single item.
Your Price
$5.95
In Stock
Scroll Saw Table Insert
PartSelect Number PS10326926
Manufacturer Part Number 900200
This replacement table insert is specially designed for Delta scroll saws. It is a genuine part that is supplied from original equipment manufacturer. The purpose of an insert is to reduce the splintering and chips on the cuts. It also helps to prevent thin slices of wood from jamming in between the blade and the plate. This item is made out of plastic and it is sold individually. To replace this table insert no tools would be needed. Simply place it in the slot on the table/bench.
Related Scroll Saw Parts
- Scroll Saw Hardware
- Scroll Saw Hoses and Tubes
- Scroll Saw Legs and Feet
- Scroll Saw Blades
- Scroll Saw Bearings
- Scroll Saw Switches
- Scroll Saw Springs and Shock Absorbers
- Scroll Saw Knobs
Popular Scroll Saw Models
Below are the most popular Scroll Saw models we have. Enter your model number in the search box to find your model.
- DW788 Scroll Saw
- DW788 Scroll Saw
- 1680 16Inch. Scroll Saw
- PCB370SS 16" Scroll Saw
- 1800 18In. Scroll Saw
- SM600 Scroll Saw
- 1671 (F0134A) Scroll Saw
- 1671 Scroll Saw
- 1671 Jig Saw
- DW788L Scroll Saw
- PCB375SS Scroll Saw
- SC164VS 16" Scroll Saw
- MS20 (F01300) Moto-Saw Scroll Saw
- 113207600 18 Inch Motorized Scroll Saw
- 137216010 Scroll Saw
- 3330 TYPE 1 (F01299) 16 in. Scroll Saw
- 95 24" Scroll Saw
- 1672 Jig Saw
- 1672 (F01300) Scroll Saw
- 576 Wooden Non-Return. Pallet