DW788 (Type 1) DeWALT Scroll Saw - Overview

This is an authentic OEM replacement part, guaranteed to fit the scroll saws listed below. This adjustable air nozzle/hose is used as a dust blower. It is connected to the bellows via the metal air pump cap. Nozzle attaches over the air pump cap's ball end. When installing this part it is recommended to heat the nozzle's connecting end un...Read moretil soft. Then just ease into place. This item is sold individually. A Torx screwdriver is used to remove the air pump cap for easier installation.

This is an OEM replacement part used in Delta and DeWALT scroll saws. It is an on/off switch and is sold individually, separate from the speed control knob. It is plastic with metal terminals. Over time, mechanical parts such as these wear down and must be replaced. To complete this repair you will need a hex key/allen wrench. • Remo...Read moreve old switch by pressing tabs • Disconnect wires • Attach wires to the new switch • Reassemble and test the tool

This is a genuine OEM sourced replacement part designed for use with a variety of power tools. This is a standard hardware which has multiple applications based on your tool. For proper use please refer to diagrams. This is a metal torx T20 metal screw which is sold individually.

This part is guaranteed OEM, made to fit the DeWALT and Delta scroll saws listed below. This hold down foot is attached to the top mount via the black bar. Note that mounting/adjustment screw is sold separately. This foot is sold individually. Associated parts: • Top Mount, part # 286277-00 • Bar, part # 286291-00 • Screw, part # 286316-00

This is a genuine OEM sourced replacement part designed for use with Dewalt and Delta saws. The purpose of this part is to tighten the blade clamp assembly. It is made out of metal with plastic and it is sold individually.

Genuine Dewalt replacement part, this item is sold individually. This is a part of the blade holding assembly on the Scroll Saws listed below.>br>Along with the other parts shown in the parts diagram this will clamp the scroll saw blade and hold it in place.

This is a genuine OEM sourced replacement part that is intended to be used with scroll saws from DeWalt and Delta. The metal bar attaches to the top rocker mount and is used to support the foot that protects the blade. The bar will require a torx driver and hex driver to install, and the bar is priced as a single item.

This replacement screw is a high quality hardware that is sourced from original equipment manufacturer for use with Delta and Dewalt scroll saws. This screw helps to secure the drive link to the vertical rocker assembly. Please note this hex socket screw is sold individually.

Genuine DeWalt replacement part Includes 1 Carbon Brush with wire lead and brush spring attached. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power ...Read moretool components. • Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. • Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. • A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. • When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

This is an authentic OEM sourced component which is made for DeWALT and Delta scroll saws. The connecting rod assembly is used to transfer power from the piston to the crankshaft. It is an identical replacement for a damage dor a missing part that was installed on a new unit. You may require a wrench and screwdriver when replacing this pa...Read morert. Check the appropriate diagrams for your model to ensure the correct repair procedure.

This is an authentic replacement part, sourced from the original manufacturer for use with scroll saws. The special rubber bellow is used to push air through the air pump and through the air nozzle. This bellow is available as an individual replacement part, please see model diagram for associative parts.