Lawn Boy Parts

This is a genuine OEM replacement blade for use on Lawn Mowers. If the blade is too dull it will tear the grass instead of an even cut. A bent or damaged blade can cause serious damage or injuries. You can use this blade with the Recycler Cutting System to chop grass clippings into fine mulch particles and return them to the ground.

This manufacturer-certified Primer Bulb is a black rubber part which comes individually sold. It is used to pump fuel from the fuel tank to the carburetor to start the engine. Installation is rated as "Easy" by customers, and will require a screwdriver and pliers. The part attaches to the primer assembly. If the bulb breaks due to wear/fatigue/damage you will see fuel leaking, and the part should be replaced. Refer to your make, model and diagrams to ensure this is the correct part.

The Stepped Washer is used to secure the wheels onto the shaft of a push mower. It attaches to the wheel axle. If broken due to wear/fatigue, the wheel will come off and the part should be replaced. Installation is rated as "Easy" by customers and will require a socket set. This part is individually sold, gray, and constructed of metal. Refer to your make, model and diagrams to check if this is the right part for you.

This replacement bump-feed button mounts at the bottom of a string trimmer head and operates the line-advance mechanism. Tapping the trimmer head lightly against the ground during use allows additional cutting line to feed from the spool without stopping for a manual adjustment. Replace the button if it is worn, cracked, missing, or no longer responds when tapped. This component replaces the bump button rather than the complete trimmer head. Remove the battery before installation and verify fit before ordering.

The Shoulder Bolt is a 3/8-16 x 3-5/8 bolt, certified by the original equipment manufacturer. It is a metal bolt which is individually sold and comes in black. Installation requires a wrench or socket and is rated as "Easy" by customers. It is mostly used to keep the wheel in place. It fits onto the unit frame and if broken or removed, the wheel will fall off. Refer to your make, model and diagram to ensure this is the correct part.

This spark plug creates the spark needed to start compatible small gas engines, it is used in select lawn mowers, generators, snow blowers, and pressure washers, replace a worn or dirty plug if the engine is hard to start, runs rough, or loses power, let the engine cool and remove the plug wire before repair, use the exact engine model number to confirm fit.

This is a high-quality replacement for a damaged or a missing lower handle for the left side. To ensure the correct repair procedure, refer to the diagrams for your specific model. This handle-lower is made of durable metal and is sold as an individual item. Note, the hardware to secure it is sold separately. It is supplied by the original equipment manufacturer for Lawn Boy lawn mowers. Replacing this component is a simple task that should only require a wrench.

This OEM Locking Ring holds components or assemblies onto a shaft or in a housing/bore when installed in a groove. Installation is rated as "Easy" by customers and will require pliers. The part secures the drive pinion gear to the drive shaft, and if broken due to wear/fatigue/damage, it will need to be replaced.

This authentic OEM sourced replacement bolt is generally used on Toro lawn mowers. The purpose of this bolt is to secure the cutting blade to the blade driver assembly. This is a hex head bolt which is sold individually. It includes a metal washer. Please note you would need a wrench to replace this blade bolt.

Genuine Toro V-Belt used on Lawn Mowers, it is sold individually. This is the Drive Belt that connects the Transmission and the Blades. Clean the pulleys off before installing the new belt to ensure top performance and longevity with your new belt. Inspect belts periodically and replace them when worn to maintain peak performance.