Bandfile Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Bandfile Parts
Your Price
$6.09
In Stock
Bandfile Carbon Brush
PartSelect Number PS10122198
Manufacturer Part Number 22-18-0710
Genuine Milwaukee replacement part Includes 1 carbon brush with wire lead attached, Sold individually • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. • Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. • Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. • A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. • When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.
Your Price
$13.13
In Stock
Bandfile Cord Set
PartSelect Number PS10122674
Manufacturer Part Number 22-64-0215
This cord is an authentic Milwaukee replacement part and is sold individually. It is constructed with tough, thick outer rubber insulation for a long service life. rnPower Cord Specifications: rn • 2 Prongs rn • 2 Wires rn • 18 Gauge rn • 8 Feet Long
Your Price
$5.16
In Stock
Bandfile Brush Spring
PartSelect Number PS10123380
Manufacturer Part Number 23-52-0240
This is an OEM authorized replacement part designed for use with Milwaukee power tools. This part is used to keep the brush tight against the armature. Over time when the brushes wear down and heat is created, the spring may lose its tension and it will have to be replaced. This item is made out of metal and it is sold individually.
Your Price
$118.89
In Stock
Bandfile Sander Idler Wheel Assembly
PartSelect Number PS12023329
Manufacturer Part Number 11011
This is a Genuine OEM sourced replacement part designed for Dynabrade Dynafile. This Idler Wheel helps to support and drive the Sanding Belt. It is made out of Metal and it is Sold Individually. This assembly includes the Wheel, Bearing and a Bolt that secures it.
Your Price
$42.71
In Stock
Bandfile Blades/rotor (4 Pack)
PartSelect Number PS10336518
Manufacturer Part Number 01011
These blades in your die grinders are located on the rotor within the motor housing. This OEM set includes four blades, each measuring approximately 1-1/2 inches by 3/8 inches. When the tool is turned on, the motor drives the rotor, causing the blades to spin rapidly and help you shape various materials. It is important to regularly check the condition of the blades and replace them if they are visibly worn out or misaligned. Additionally, pay attention to any unusual signs during operation, such as increased noise, vibration, or burning smells. To replace the blades, refer to your user manual for detailed instructions on how to disassemble the motor housing. Typically, you will need to secure the tool in a padded vise, then use an adjustable pin wrench to remove the lock ring. Proceed with disassembling the tool by removing the collet and rotor nut from the rotor shaft, followed by the cylinder, spacer, and the four blades from the rotor.
Your Price
$5.37
In Stock
Bandfile Right Brush Holder
PartSelect Number PS10122320
Manufacturer Part Number 22-20-0692
This right brush holder is an specially manufactured for Milwaukee power tools. It is a genuine replacement part that is sourced directly from original equipment manufacturer. This part is used to secure the carbon brush that is sold separately. Please note, this metal brush holder is sold individually. You should only need a screwdriver to complete this repair.
Your Price
$5.37
In Stock
Bandfile Left Brush Holder
PartSelect Number PS10122319
Manufacturer Part Number 22-20-0691
It is a genuine item that is supplied directly from the original equipment manufacturer for use with Milwaukee power tools. The purpose of a brush holder is to secure a carbon brush in the housing, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality item is made of durable metal and is sold individually.
Your Price
$16.75
In Stock
Bandfile Knob
PartSelect Number PS10340124
Manufacturer Part Number 95218
This knob is an original part from Dynabrade and is used as a securing mechanism in the equipment listed below. This part consists of a plastic knob with a metal threaded shaft. Please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. This item is sold individually.
Your Price
$6.15
In Stock
Bandfile Belt Guard
PartSelect Number PS10130279
Manufacturer Part Number 43-54-0615
An authentic OEM approved replacement component which is supplied for use with Milwaukee band files. This special guard is secured to the housing to protect the belt from dust and other debris. It is a high-quality part which is made of durable black plastic and it is sold individually, please note the hardware to secure it is sold separately.
Your Price
$6.10
In Stock
Bandfile Side Handle
PartSelect Number PS10134116
Manufacturer Part Number 49-15-0310
This replacement side handle is a genuine Milwaukee part, not an aftermarket imitation. It is sourced directly from original equipment manufacturer for use with sanders and grinders. This side handle helps you to better control the tool while it is in operation. It consists of a plastic handle and a metal threaded shaft. One item is included per order. Replacing this item does not require any tools.
Related Bandfile Parts
- Bandfile Bearings
- Bandfile Seals and Gaskets
- Bandfile Hardware
- Bandfile Caps and Lids
- Bandfile Springs and Shock Absorbers
Popular Bandfile Models
Below are the most popular Bandfile models we have. Enter your model number in the search box to find your model.
- 14303 Heavy Duty Duel Motor w/Platen Dynanle II
- 14000 Dynafile
- 15003 () Dynafile II
- 15003 Portable Belt Machine
- 40320 Standard Dynafile II Abrasive Belt Tool
- 40320 Abrasive Belt Tool
- 6101 5.5 Amp Bandfile
- 6101 5.5 Amp Bandfile
- 6101 5.5 Amp Bandfile
- 6101 5.5 Amp Bandfile
- 11475 Standard Duty Dynabelter
- 18100 3/4" Auto File Belt Tool
- 14306 Heavy Duty Duel Motor w/Platen Dynanle II
- 40610 Electric Dynafile II Avrasive Belt Tool
- 15006 Dynafile II
- 15006 Portable Belt Machine
- 40335 Dynafile II Abrasive for Non-Woven Nylon Belts
- 40352 .4 hp Dynafile II
- 15420 Dynafile III Abrasive Belt Tool
- 14311 Duel Motor Standard Slow Speed Dynanlge II