Dynabrade Bandfile Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Dynabrade Bandfile Parts
Your Price
$140.57
In Stock
Dynabrade Bandfile Sander Idler Wheel Assembly
PartSelect Number PS12023329
Manufacturer Part Number 11011
This is a Genuine OEM sourced replacement part designed for Dynabrade Dynafile. This Idler Wheel helps to support and drive the Sanding Belt. It is made out of Metal and it is Sold Individually. This assembly includes the Wheel, Bearing and a Bolt that secures it.
Your Price
$47.76
In Stock
Dynabrade Bandfile Blades/rotor (4 Pack)
PartSelect Number PS10336518
Manufacturer Part Number 01011
These blades in your die grinders are located on the rotor within the motor housing. This OEM set includes four blades, each measuring approximately 1-1/2 inches by 3/8 inches. When the tool is turned on, the motor drives the rotor, causing the blades to spin rapidly and help you shape various materials. It is important to regularly check the condition of the blades and replace them if they are visibly worn out or misaligned. Additionally, pay attention to any unusual signs during operation, such as increased noise, vibration, or burning smells. To replace the blades, refer to your user manual for detailed instructions on how to disassemble the motor housing. Typically, you will need to secure the tool in a padded vise, then use an adjustable pin wrench to remove the lock ring. Proceed with disassembling the tool by removing the collet and rotor nut from the rotor shaft, followed by the cylinder, spacer, and the four blades from the rotor.
Your Price
$22.37
In Stock
Dynabrade Bandfile Knob
PartSelect Number PS10340124
Manufacturer Part Number 95218
This knob is an original part from Dynabrade and is used as a securing mechanism in the equipment listed below. This part consists of a plastic knob with a metal threaded shaft. Please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. This item is sold individually.
Your Price
$113.03
In Stock
Dynabrade Bandfile Contact Arm Assembly
PartSelect Number PS12023348
Manufacturer Part Number 11218
This item is a genuine Dynabrade part that is OEM sourced to ensure quality. The contact arm assembly is intended to be used with belt sanders. The contact arm assembly attaches to the idler arm and is used as the turn at the end of the belt loop. The assembly includes the front roller and belt pads. This item is priced as a single item.
Your Price
$71.22
In Stock
Dynabrade Bandfile Carbon Brush Set
PartSelect Number PS10337784
Manufacturer Part Number 40750
It is an authentic manufacturer-sourced replacement set which is specially designed for use with Dynabrade power tools. The brushes play the key role by conducting electric current while maintaining physical contact with an armature. Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem. This set includes two high-quality carbon brushes with attached lead wires.
Your Price
$7.94
In Stock
Your Price
$127.24
In Stock
Dynabrade Bandfile Contact Arm Assembly
PartSelect Number PS12023346
Manufacturer Part Number 11206
This authentic Dynabrade part is supplied by the original manufacturer for use with abrasive belt tools. It is utilized to support and guide the belt. If the part is missing or is damaged, this will provide an identical replacement for the original component that was installed on a new unit. Make sure to refer to the owner's manual and the appropriate diagrams for your model. One durable contract arm assembly is included. A screwdriver may be needed to perform this repair.
Your Price
$33.32
In Stock
Dynabrade Bandfile Bearing
PartSelect Number PS10336514
Manufacturer Part Number 01007
This is an original part assembled by the original manufacturer. It is compatible with various Dynabrade handheld power tools, such as grinders and finishers. Ball bearings are used to buffer between moving parts. They also serve to keep parts correctly positioned while assuring steady directional movement. Ball bearings need frequent replacement because of this high-wear role. This steel part is sold individually.
Your Price
$113.98
In Stock
Your Price
$46.32
In Stock
Dynabrade Bandfile Vanes (4/pkg.)
PartSelect Number PS10336548
Manufacturer Part Number 01185
This is an authentic component which is sourced directly from the original equipment manufacturer for use with Dynabrade equipment. This part is made of layered fabric and laminate and is used to spin the rotor. This part is designed to slowly wear down over time, to avoid damage to the cylinder. It is advisable to replace all the rotors at the same time for even wear. Keep in mind these high-quality blades are sold in a pack of four. Please make sure to check the owners manual and the appropriate diagrams of your model for the correct location and application of these parts.
Dynabrade Bandfile Appliance Types
Popular Dynabrade Bandfile Models
Below are the most popular Dynabrade Bandfile models we have. Enter your model number in the search box to find your model.
- 14000 Dynafile
- 40320 Standard Dynafile II Abrasive Belt Tool
- 40320 (Old) Abrasive Belt Tool
- 14303 Heavy Duty Duel Motor w/Platen Dynanle II
- 15003 Portable Belt Machine
- 15003 (Mini) () Dynafile II
- 40610 Electric Dynafile II Avrasive Belt Tool
- 14300 Standard Duty Dyanagle II
- 11475 Standard Duty Dynabelter
- 18100 3/4" Auto File Belt Tool
- 14306 Heavy Duty Duel Motor w/Platen Dynanle II
- 05028 Air Motor for Standard/"NWN" Machine
- 15400 Dynafile III
- 15006 Portable Belt Machine
- 15006 (Mini) Dynafile II
- 40335 Dynafile II Abrasive for Non-Woven Nylon Belts
- 18101 7 Degree Offset Auto File
- 40352 .4 hp Dynafile II
- 14302 Heavy Duty Duel Motor Dynanle II
- 40321 Dynafile II