Official Beveler Parts – PartSelect.com

CARBON BRUSH SET, CUT-OFF – Part Number: 316065460

Your Price

$6.12

PartSelect Number PS18797949

Manufacturer Part Number 316065460

This authentic OEM carbon brush set is designed for use in the motor assembly of angle grinders. It includes two brushes, each equipped with lead wires, and is responsible for transferring electrical current to the armature, enabling the motor to function. Over time, carbon brushes naturally wear down due to friction, aging, and frequent use. A worn brush may fail to maintain contact with the armature, leading to reduced power output or complete motor failure. If other motor-related issues have been ruled out, replacing the brushes may restore performance. To perform the repair, first unplug the angle grinder from the power source. Locate and remove the brush holders on the side of the motor housing, then replace the faulty brushes with the new ones. Reinstall the brush holders and ensure proper contact between the brushes and the armature.

CARBON BRUSH SET CUT-OFF – Part Number: 316046900

Your Price

$6.12

Beveler Carbon Brush Set Cut-off

PartSelect Number PS18797486

Manufacturer Part Number 316046900

This is a genuine Metabo replacement part, it is sold as a set (2). Worn brushes frequently are the cause behind a motor running poorly. • Replacing brushes can fix a motor that's operating intermittently. • New brushes can restore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

CABLE SLEEVE 12 – Part Number: 344101220

Your Price

$2.99

Beveler Cable Sleeve 12

PartSelect Number PS18805781

Manufacturer Part Number 344101220

Keep in mind this part is made of plastic and rubber and is priced individually. The cable sleeve goes on the cable. It will need to be replaced if it breaks. A set of pliers may be necessary during the installation of this part. It is a genuine OEM sourced part which is specially designed for use with Metabo angle grinders.

Your Price

$2.99

Beveler Tacho Disc 13

PartSelect Number PS18805181

Manufacturer Part Number 343433060

ARMATURE COMPL. – Part Number: 310011020

Your Price

$38.17

Beveler Armature Compl.

PartSelect Number PS18796278

Manufacturer Part Number 310011020

Your Price

$2.99

Beveler Switch Slide

PartSelect Number PS18805238

Manufacturer Part Number 343437100

This is an original component from the Metabo manufacturer. The plastic slide switch is made for use with several angle grinder devices. Fastened to the switch rod in the housing, this item allows the operator to (de)activate the tool. To complete this repair, you will need a hex key and a screwdriver. The slide switch is sold individually.

Your Price

$4.57

Beveler Switch 2-pole

PartSelect Number PS18805027

Manufacturer Part Number 343410280

CABLE WITH PLUG – Part Number: 344490920

Your Price

$18.32

Beveler Cable With Plug

PartSelect Number PS18806071

Manufacturer Part Number 344490920

This replacement cable with plug is a high quality item that is supplied directly from original equipment manufacturer for use with Metabo grinders. It is wired to the tool to supply electric power from a standard U.S. outlet. This durable rubber insulated cable is sold individually, please note the cord insulator that protects is from breaking is sold separately.