Beveler Motors

Beveler Motor Brush This replacement part is designed for use with Jancy power equipment. This item consists of one (1) carbon brush with a lead wire and a spring attached. It is advised to replace both brushes at the same type. Over time brushes will wear down and will need to be replaced. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems. You would need a flat-head screwdriver to complete this job. • Remove the brush cap • Remove old brush and replace it with a new one • Re-assemble and test the equipment

Beveler Motor Arm Assembly

Beveler Motor, Usa101 110v

Beveler Speed Control, Motor 120v Rn-0

Beveler Cord Assembly, Motor

Beveler Motor Assy., 120v

Beveler Motor Brush This is genuine replacement carbon brush designed for use with Jancy metal cutters. This assembly includes one (1) carbon brush with a lead wire and a spring attached. Carbon brushes are a commonly replaced part on power tools. Due to regular use and friction brushes will gradually wear down and will require replacement. It is advised to replace both brushes at the same type. You would need a screwdriver to complete this job. • Make sure the unit is unplugged • Remove screws from the motor housing • Take off motor cover to gain access to the brushes • Take out old brushes and replace them with the new ones • Re-assemble and test the tool

Beveler Motor, Usa101 220v

Beveler Motor Assembly., 240v

Beveler Armature, Usa101 Motor 220v