Official Water Softener Parts | Order Today, Ships Today

Brine Valve Clip – Part Number: WS60X10004

Your Price

$21.89

Water Softener Brine Valve Clip

★★★★★

3 Reviews

PartSelect Number PS311352

Manufacturer Part Number WS60X10004

Used in Water Filters.

Fixes these symptoms

Touchpad does not respond
See more...

Installation Instructions

edward from perkasie, PA

watersoftener was leaking at the union of the manifold and the unit

water softener was leaking due to a broken clip. turned off water and drained the pipes. some how managed to remove the broken clip from the inlet side. i than was able to remove the good clip from the outlet side, without breaking it. i replaced the washer on the leaking side, cleaned and resealed all the joints. finally i reattached the manifold to the water softener. no leaks so far. next time i will discarge the unit before repair. Read more...

MOTOR CAM GEAR ASSEMBLY – Part Number: WS26X25021

Your Price

$115.95

Water Softener Motor Cam Gear Assembly

★★★★★

4 Reviews

PartSelect Number PS18352422

Manufacturer Part Number WS26X25021

Restore smooth operation and eliminate grinding noises with this motor cam gear assembly, a critical component that transmits rotation from the motor to drive other parts in sequence. Designed to fix issues caused by worn or stripped gear teeth, this genuine replacement part ensures proper timing, prevents slipping, and maintains consistent performance. Installation is straightforward—just disconnect power and follow your appliance’s instructions for secure setup.

Your Price

$13.95

Water Softener Tube Clip

PartSelect Number PS311356

Manufacturer Part Number WS60X10008

Sold individually and used with water softeners.

Installation Instructions

Dennis from LIBERTY, MO

The unit was not measuring water as it went thru.had stuck turbin.

Very easy to put softener in bypass and release pressure by starting a regeneration cycle. Clips removed by hand with no force required. Separate bypass from softener. Removed old turbine and slid new turbine into unit. Reconnect bypass valve and install clips by hand. Return softener to service mode. Unit now shows gal / minute in screen. Read more...

Water Softener Control – Part Number: WS21X20981

Your Price

$547.33

Water Softener Control

★★★★★

3 Reviews

PartSelect Number PS11727025

Manufacturer Part Number WS21X20981

Experience optimal performance with your water softener thanks to this state-of-the-art electronic control board from GE. It is expertly designed to effectively manage the various functions and settings of your water softener unit. Be sure to unplug your water softener prior to installation to ensure absolute safety. Also, remember to wear work gloves to shield your hands while performing the installation. Trust in the reliable quality and superior technologic precision of GE's product. This electronic control board is an essential part to ensure your water softener's efficient functionality.

Brine Valve Assembly – Part Number: WS15X10077

Your Price

$151.21

Water Softener Brine Valve Assembly

PartSelect Number PS6447789

Manufacturer Part Number WS15X10077

Introducing the Brine Valve Assembly, a genuine OEM item crafted by GE with utmost precision. Designed for efficient performance, this valve assembly may appear similar to other models, but it showcases unique size and shape features that underline its exceptional quality. It's crucial to ensure that the model of your appliance matches with this product to guarantee a perfect fit and top performance. As a trusted GE product, rely on this Brine Valve Assembly for a durable and effective solution to your appliance repair needs. Please remember to verify your model's compatibility before placing an order.

Installation Instructions

John from RICHMOND, TX

Using RustOut in the brine tank for years destroyed the seals and salt valve of the brine assembly. Easier to replace entire brine valve assembly.

Remove the top back lid/unlatch 2 clips. Unscrew the small brine tube nut (white) from left side of control unit. Cut the tube to remove nut from old tube with utility knife. Keep nut for use on new assembly. Not included. Remove brine well cover. Pull the tube out of the top and from behind resin tank and remove assembly from brine well. Discarded the old brine valve assembly. Removed the bit of old tube from the nut, w/ utility knife. Careful not to damage the old nut. Snake the new brine tube from front right side through the back of the resin tank to the old hole on the left. Follow the old path. Insert the new brine tube into the top section through the hole the old one came out of. Attached nut to new brine tube. Screw nut/new brine tube to the connector of control unit. Small fingers help. Adjust/slide the float assembly 6-8 inches inches above the valve, e.g. Styrofoam/Metal Weight slides up/down the white stalk. Re-inserted the brine assembly into the brine tank. Replace top. Manually regenerate to make sure new brine assembly is not leaking and filling the brine tank properly. Done. Read more...

VALVE BY PASS Assembly – Part Number: WS15X10078

Your Price

$135.19

Water Softener Valve By Pass Assembly

★★★★★

1 Review

PartSelect Number PS8759091

Manufacturer Part Number WS15X10078

This bypass valve assembly is an essential component for water softener systems, allowing you to control water flow without shutting off supply to the entire home. It features a convenient bypass function for directing water around the softener during maintenance or manual operation, and a blending valve for adjusting water hardness to your preferred level. Built for durability and high performance, this part ensures proper fit and reliable operation in large, high-flow water softener models. Installation is straightforward—follow the manufacturer’s guidelines to secure the valve and restore full functionality.

ADAPT.-NPT THD-STD VALVE – Part Number: WS60X10013

Your Price

$38.95

Water Softener Adapt.-npt Thd-std Valve

PartSelect Number PS1483922

Manufacturer Part Number WS60X10013

Water Softener Control – Part Number: WS21X10053

Your Price

$265.97

Water Softener Control

PartSelect Number PS8759105

Manufacturer Part Number WS21X10053

Refresh and enhance the performance of your GE water softener with this genuine OEM item. This electronic control board is the engine that manages the functions and settings of your water softener unit. Please ensure this part is appropriate for your model prior to purchasing, as size and shape may slightly vary. When installing this component, it's highly recommended to unplug your water softener and wear work gloves for safety and ease. A dose of simplification to your appliance repair needs, this control board allows you to focus on enjoying soft, delicate water. Experience the quality and reliability that GE consistently offers.