Clipper Trimmer Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Clipper Trimmer Parts
Your Price
$5.95
Special Order
Clipper Trimmer Brush And Spring Assembly
PartSelect Number PS18199491
Manufacturer Part Number 42584025000
Genuine Oster Pro replacement part, this product is sold in a set of two. It also includes the Brush Springs. It is used on the Clipper models shown below. Replacing brushes can fix a motor that’s operating intermittently. Carbon brushes are one of the most commonly replaced power tool parts. A worn-out brush will often be worn down and can be cracked, pitted, or burned. If a Brush is burned or scored, it is advised to inspect the armature and field for damage.
Your Price
$4.99
In Stock
Clipper Trimmer Switch Button
PartSelect Number PS17016561
Manufacturer Part Number 69136
This is an authentic replacement part manufactured for Andis clippers. This molded rubber switch button is the cover seen from the side of the clipper, when pressed the button engages the circuit board. Overtime the switch button can wear exposing the circuit board, it is recommended to replace worn switch buttons. The switch button is sold individually, and the circuit board is available separately.
Your Price
$6.15
Special Order
Clipper Trimmer 1/4" (6mm) Guide Comb (sna
PartSelect Number PS10469797
Manufacturer Part Number RP00156
This is an OEM part sourced directly from the manufacturer. The guide comb is designed for use in haircut kits. This part is made of high-quality plastic, and is an optional attachment that can be snapped onto the end of the clipper to provide an even cut length. No tools are required when replacing this part. This item is sold individually.
Your Price
$6.15
In Stock
Clipper Trimmer 1/8" (3mm) Guide Comb
PartSelect Number PS10469767
Manufacturer Part Number RP00124
This is a replacement part sourced directly from the manufacturer for Remington haircut kits. The 1/8 (3mm) Guide Comb helps with guiding to make sure that hair is cut at an even length. This part is approximately 2 inches wide. No tools are needed for repairing or installing, simply just push the part in place. This part is made of plastic and is sold individually.
Your Price
$23.09
In Stock
Clipper Trimmer Ac Cord
PartSelect Number PS10427725
Manufacturer Part Number 482232110344
This is a genuine Norelco replacement part for use with electric shavers/razors, this is not an aftermarket imitation part. This part is used to charge the internal batteries of the shaver/razor, the black coil cord is sold individually.
Your Price
$5.16
Special Order
Your Price
$5.30
In Stock
Clipper Trimmer Switch Assy-ml/gc-service
PartSelect Number PS12006211
Manufacturer Part Number 01767
This is a genuine high quality switch assembly that is sourced directly from original equipment manufacturer for use with Andis clippers. It is the part of the tool that allows user to turn the unit on and off. Over time mechanical switches will wear out and may begin to fail eventually requiring replacement. Replacing it is a simple task that should only require a screwdriver. One durable plastic switch with two lead wires attached is included per order.
Your Price
$20.24
In Stock
Clipper Trimmer Hinge Assembly
PartSelect Number PS12006744
Manufacturer Part Number S63897
This part is manufactured by Andis. This Hinge Assembly is used on many models of Andis hair clippers. The Hinge Assembly includes the Blade Lock (part number 64537). This part holds the cutting blades into place while cutting hair. If the blade feels loose or won't stay in place, then the Hinge Assembly needs to be replaced. To replace this part two Blade Hinge Screws (27864) will need to be removed. A Philips screwdriver is all that is needed for the replacement of this part.
Your Price
$4.13
In Stock
Clipper Trimmer 1/2" (12mm) Guide Comb
PartSelect Number PS10469799
Manufacturer Part Number RP00158
Your Price
$4.99
In Stock
Clipper Trimmer Tension Spring Assembly
PartSelect Number PS12164188
Manufacturer Part Number 201394
This part comes directly from Andis. This Tension Spring is used in multiple models of Andis hair trimmers. The Spring is made of metal and includes the nylon tip. The Spring holds tension on the cutter of the blade. If the blade doesn't move, then this part should be replaced. This part is commonly purchased with the Tension Screw (part number 32527) and the Retaining Screws (29752). Tools Used: • Flat Head Screw Drivers • Philips Head Screw Driver
Popular Clipper Trimmer Models
Below are the most popular Clipper Trimmer models we have. Enter your model number in the search box to find your model.
- AGC2 2-Speed Clipper
- AGC2 ProClip UltraEdge Detachable Blade
- AGC2 ProClip UltraEdge Detachable Blade
- AGC2 2-Speed Clipper
- AGC2 ProClip UltraEdge Detachable Blade
- AGC2 2-Speed Clipper
- AGC2 ProClip UltraEdge Detachable Blade
- AGC2 ProClip UltraEdge Detachable Blade
- AGC2 2-Speed 120V Clipper
- AGC2 2-Speed Clipper
- AGC2 ProClip UltraEdge Detachable Blade
- AGC2 ProClip UltraEdge Detachable Blade
- AGC2 2-Speed 120V Clipper
- AGC2 2-Speed Clipper
- AGC2 ProClip UltraEdge Detachable Blade
- AG2 UltraEdge/ Size 10
- AG2 (Super) 2-Speed 120V Clipper
- AG2 UltraEdge/ Size 10
- AG2 120V Clipper
- AG2 2-Speed 120V Clipper