Official Circular Saw Parts

Your Price

$17.80

PartSelect Number PS10170261

Manufacturer Part Number 381028-08

Sold Individually. This carbon brush fits a variety of gardening and lawn tools. The brush is a common replacement part and can easily fix most motor malfunctions. This brush comes with a wire lead and a connection terminal. Inspect the wire lead for any damage and replace immediately if burns or cracks are noticed. Refer to the diagram provided by the manufacturer for installation instructions.

Brush Assembly – Part Number: 22-18-0075

Your Price

$6.15

Circular Saw Brush Assembly

PartSelect Number PS10122139

Manufacturer Part Number 22-18-0075

Genuine Milwaukee replacement part. Includes 1 Carbon Brush with wire lead, brush spring and bracket attached. Two brushes are needed for the tools shown below. • Worn brushes are often the cause behind a a poorly running motor. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most commonly replaced power tool parts. Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. When replacing carbon brushes be sure to also inspect your armature for burns, cracks, or other damage which are indication of a larger motor problem.

Your Price

$11.22

Circular Saw Carbon Brush Set

PartSelect Number PS10156649

Manufacturer Part Number CB303

This set of two carbon brushes is a genuine Makita replacement part, packaged in an official Makita retail box. Each brush includes wire leads and attached brush springs, and is designed to restore optimal performance in compatible Makita tools. Carbon brushes are among the most commonly replaced components in power tools, as they gradually wear down through friction and regular use. Worn brushes can lead to intermittent motor function, reduced power, or diminished electric braking. Replacing them can resolve these issues and restore proper motor performance. Signs of wear include brushes worn near the wire lead, or those that are cracked, pitted, or burned. When replacing carbon brushes, it’s also important to inspect the armature for any signs of damage, such as burns or cracks, which may indicate a more serious motor issue.

Brush and Spring – Part Number: 145323-06

Your Price

$11.54

Circular Saw Brush And Spring

PartSelect Number PS10166057

Manufacturer Part Number 145323-06

This Genuine OEM carbon brush is an essential replacement part designed for use with a variety of DeWALT and Black & Decker saws. Sold individually, this high-quality component is made to conduct electrical current within the motor, enabling efficient power transfer and tool performance. Over time, carbon brushes naturally wear down due to friction and electrical contact, which can lead to intermittent motor issues or failure to start. Measuring 3/4 inch in length, 1/2 inch in width, and 1/4 inch in thickness, this brush is built to original specifications for a precise fit. When replacing carbon brushes, it’s important to also inspect the motor’s armature for signs of burns, cracks, or other damage, which may indicate a more serious issue. A hex key or screwdriver may be required for installation, depending on your tool model.

Fixes these symptoms

Won't turn on
See more...

Your Price

$11.22

Circular Saw Carbon Brush Set

PartSelect Number PS10156641

Manufacturer Part Number CB154

This is a genuine Makita replacement part that includes two carbon brushes with wire leads attached. Carbon brushes are essential components in power tools and are among the most commonly replaced parts due to regular wear from friction. Over time, worn brushes can cause a motor to run poorly, operate intermittently, or lose electric braking power. Replacing them can often restore your tool’s performance. A worn brush may appear cracked, pitted, burned, or worn down near the wire lead. It’s always best to replace both brushes at the same time, even if only one shows signs of wear. When installing new brushes, be sure to inspect the armature for any damage such as burns or cracks, which could indicate more serious motor issues.

Carbon Brush Set – Part Number: 4960371001

Your Price

$6.29

Circular Saw Carbon Brush Set

PartSelect Number PS16641341

Manufacturer Part Number 4960371001

Genuine Skil replacement parts Set of 2 Carbon Brushes with wire leads and brush springs attached. • Worn brushes are often the cause of a poorly running motor • Replacing brushes can fix an intermittent motor • New brushes can restore a motor's electric braking Carbon motor brushes are one of the most commonly replaced power tool components. • Because carbon brushes are wear items, meaning that through friction and use they will gradually wear away, they will eventually require replacement. • Worn brushes are common causes of intermittent motor function, reduced electric braking, and reduced motor power. • A worn out brush will often be worn down near the wire lead and may be cracked, pitted, or burned. • When replacing carbon brushes, be sure to also inspect your armature for burns, cracks, or other damage which indicates a larger motor problem.

Your Price

$16.02

Circular Saw Shoe Assembly

PartSelect Number PS10132586

Manufacturer Part Number 45-16-0645

This is a genuine Milwaukee replacement part. It is sold individually for the Milwaukee Sawzalls listed below. The Shoe Assembly helps guide the blade where you want to cut. It is adjustable by pulling down on the 31-52-0090 Shoe Release Lever, for use of longer or shorter blades. The foot pivots for cutting angles. The saw should not be used without this part or it could damage the saw. Part is easily removed and installed with the lever release.

Your Price

$27.33

Circular Saw Switch

PartSelect Number PS10123797

Manufacturer Part Number 23-66-2635

Introduce your electrical machinery to new heights of functionality with this high-quality switch from the renowned brand Milwaukee. Perfectly designed to meet the high standards of durability and performance, this switch embodies excellence in manufacturing and reliability. Engineered with precision, it is versatile and can easily integrate into various Milwaukee tools. It promises easy installation, enhancing overall work experience, and swift operation of devices. Upgrade your equipment with this authentic Milwaukee switch and experience the assurance of top-tier performance and superior reliability.

Videos!

Your Price

$36.89

Circular Saw Power Cord

PartSelect Number PS10169913

Manufacturer Part Number 330079-98

It is constructed with tough, thick outer rubber insulation for a long service life. Power Cord Specifications: • 2 Prongs • 2 Wires • 14 Gauge • 10 Feet Long

Your Price

$5.15

Circular Saw Blade Bolt

PartSelect Number PS10183641

Manufacturer Part Number 648697-00

This is a genuine manufacturer sourced replacement part designed for use with Dewalt circular saws. It is used to secure the blade to the spindle/shaft. This part is made out of metal and it is sold individually. Requires a wrench or a hex key/allen wrench to tighten/loosen this screw.

Shop by Department

Top Appliance Brands

Top Lawn Equipment Brands

Circular Saw Parts

Popular Circular Saw Parts

Related Circular Saw Parts

Popular Circular Saw Models

Shop by Department

Top Appliance Brands

Top Lawn Equipment Brands

Sample Model Number Tags

EasyApplianceParts is Now PartSelect!

Circular Saw Parts

Find Your Part

Popular Circular Saw Parts

Related Circular Saw Parts

Popular Circular Saw Models