Craftsman Circular Saw Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Craftsman Circular Saw Parts
Your Price
$13.68
In Stock
Craftsman Circular Saw Brush And Spring
PartSelect Number PS10166057
Manufacturer Part Number 145323-06
This Genuine OEM carbon brush is an essential replacement part designed for use with a variety of DeWALT and Black & Decker saws. Sold individually, this high-quality component is made to conduct electrical current within the motor, enabling efficient power transfer and tool performance. Over time, carbon brushes naturally wear down due to friction and electrical contact, which can lead to intermittent motor issues or failure to start.
Measuring 3/4 inch in length, 1/2 inch in width, and 1/4 inch in thickness, this brush is built to original specifications for a precise fit. When replacing carbon brushes, it’s important to also inspect the motor’s armature for signs of burns, cracks, or other damage, which may indicate a more serious issue. A hex key or screwdriver may be required for installation, depending on your tool model.
Fixes these symptoms
- Won't turn on
- See more...
Your Price
$39.76
In Stock
Craftsman Circular Saw Power Cord
PartSelect Number PS10169913
Manufacturer Part Number 330079-98
It is constructed with tough, thick outer rubber insulation for a long service life.
Power Cord Specifications:
• 2 Prongs
• 2 Wires
• 14 Gauge
• 10 Feet Long
Your Price
$6.40
In Stock
Craftsman Circular Saw Bolt
PartSelect Number PS10166064
Manufacturer Part Number 145344-00
This is an OEM part sourced directly from the manufacturer. The screw is found in Craftsman circular saws. This is a metal part, used to hold other components to the spindle assembly. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You will require a wrench when replacing this item. This part is sold individually.
Your Price
$8.55
In Stock
Craftsman Circular Saw Cord Protector
PartSelect Number PS10173396
Manufacturer Part Number 445338-00
This cord protector is a genuine DeWalt replacement part and is sold individually. Cord Protectors are designed to slide onto your cord and fit securely at the end, where it's firm rubber will protect the base of the cord from getting bent and pinched, which can expose the wires and become a safety hazard.
Your Price
$6.40
In Stock
Craftsman Circular Saw Retaining Ring
PartSelect Number PS10166028
Manufacturer Part Number 144803-00
This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with circular saws and hammer drills. The special retaining ring is commonly used to secure the fan to the armature's shaft. This item is available as an individual replacement part, please see illustrated diagram for associative parts.
Your Price
$8.62
In Stock
Craftsman Circular Saw Outer Blade Clamp
PartSelect Number PS10166063
Manufacturer Part Number 145343-01
This is a genuine replacement outer blade clamp specially made for circular saws. This part helps to secure the blade to the unit. A wrench would be needed to remove the blade bolt when replacing this clamp. It is made out of metal and it is sold individually.
Your Price
$32.84
In Stock
Craftsman Circular Saw Holder
PartSelect Number PS10166161
Manufacturer Part Number 147097-09
This brush and holder assembly is a genuine Dewalt replacement part, not aftermarket or generic. _b_This item is sold individually_/b_. As pictured, this item includes everything you need to replace a brush in your power tool. The brush, holder, terminals, and spring are included and ready for installation. If you only need the carbon brush and not this entire holder assembly, you can purchase the brush separately (see the 'Related Items' section below). This brush and holder is compatible with the tools listed below, but it is not guaranteed to fit any other power tools. It is advised that you replace both brushes only if you think all you need is one.
Your Price
$6.30
In Stock
Craftsman Circular Saw Assembly Brush
PartSelect Number PS11857088
Manufacturer Part Number 290075051
This brush assembly is an authentic Ryobi item, it is not an aftermarket imitation. It is sourced directly from original equipment manufacturer for use with circular saws and electric cultivator. This assembly includes (1) metal brush holder and (1) carbon brush with a lead wire and a spring attached. It is advised to replace both brushes at the same type. Please note, the hardware to secure this assembly is sold separately. Replacing this brush assembly is a simple task that should only require a screwdriver.
Your Price
$6.40
In Stock
Your Price
$6.40
In Stock
Craftsman Circular Saw Spring Washer
PartSelect Number PS10084051
Manufacturer Part Number 680776001
This is an authentic manufacturer-sourced part. It is specially designed for Ridgid and Ryobi circular saws. It helps to distribute the pressure evenly and provide a tight fit for the blade. If a spring washer on your equipment is damaged or is missing it will provide an identical replacement for the component that was included with a new unit. Keep in mind this high-quality hardware is made of durable metal and is sold individually. You will need a wrench to remove and resecure the blade bolt to replace this spring washer.
Craftsman Circular Saw Appliance Types
Related Craftsman Circular Saw Parts
Popular Craftsman Circular Saw Models
Below are the most popular Craftsman Circular Saw models we have. Enter your model number in the search box to find your model.
- CMES510 (Type 1) 7-1/4 15a Circ Saw
- CMCS505 (Type 1) Circular Saw
- CMCS500B (Type 1) 20v Max Circ Saw
- 137214130 Circular Saw
- CMES500 (Type 1) 7-1/4 13a Circ Saw
- 137216100 Circular Saw
- 137212060 Circular Saw
- 32010870 Circular Saw
- 135276103 7 1/4" Worm Drive Saw
- CMCS550B (Type 1) 20v Brshls 7-1/4 Cir
- 17226672 Circular Saw
- 135276101 Industrial 7-1/4 Inch Worm Drive Saw
- 135276102 Industrial 7-1/4" Worm Drive Saw
- 315212900 14" Abrasive Cut-off Machine
- 137224240 Saw
- 17217184 Saw
- 135276100 7-1/4 Inch Worm Drive Saw
- 90010890 5 1 / 2 Inch D. I. Compact Saw
- 315108340 Circular Saw
- 315108620 Circular Saw