Official Crosley Parts | Order Today, Ships Today | PartSelect
Quick Question!

Have you ever purchased from PartSelect.com before?

Popular Crosley All Parts

Your Price
$4.51
Light Bulb - 40W
(34)
PartSelect Number PS884734
Manufacturer Part Number 8009
This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are most often used to light the inside of refrigerators and ranges. It features a standard socket base, which means you simply unscrew the burnt-out bulb and screw in the replacement. Depending on the appliance you may require a screwdriver or nut driver to access the light bulb. We recommend you wear work gloves while handling this replacement part.
Fixes these symptoms
No Symptoms for this part
Installation Instructions
judie from mays landing, NJ says,

interior drawers were off their rollers
pulled the washer out and replaces the top roller system on both sides and the replaced the weels and brackets on the bottom drwaer. however i had trouble putting the dish washer back correctly and ha...read more

Your Price
$15.47
Multi Rib Belt - 92-1/4"
(162)
PartSelect Number PS346995
Manufacturer Part Number 341241
This multi rib belt is an important part in your dryer, it is what helps rotate the drum. The belt attaches to the drum, idler pulley, and motor pulley. As the armature of the motor rotates, the belt begins to move and turns the drum. If you notice the drum of your dryer is not spinning during the dry cycle, but you hear the motor running, your belt may have snapped and it will need to be replaced. This belt features four ribs and three grooves, however it replaces a wide variety of belts including wider styles that had five ribs and four grooves. When installing this part make sure the grooves are facing down, against the drum. This replacement part is 92 1/4 inches in length, and 1/4 inch wide. Before you begin any repair work, make sure your dryer has been unplugged.
Fixes these symptoms
Heat stays on after drum has stopped
No heat or not enough heat
Noisy

See more...
Installation Instructions
Ray from Denton, TX says,

Dryer tub belt broke
Removed the two screws that attatch the lent channel to the top of the dryer, then lifted the top of the dryer by pushing in on the two locking tabs located at the front , left and right , corners of ...read more

Your Price
$26.31
Door Shelf Retainer Bar
(74)
PartSelect Number PS734935
Manufacturer Part Number 240534901
This door shelf retaining bar, also known as refrigerator door bar retainer or fridge door rack, is a genuine part sourced from the original manufacturer. It is a white plastic part that measures about 25 inches wide, 3 inches high, and 5 inches deep, and is sold individually. The bar attaches to the inside of the refrigerator or freezer door to hold food items on the door shelves. The bar may need to be replaced if it is warped or broken. It is recommended to check other door shelf retaining bars on the fridge to be sure no other bars need to be replaced.
Fixes these symptoms
Door won’t open or close


Installation Instructions
Cynthia from Long Beach, CA says,

The retainer door shelf broke 3 years ago
I just snapped the new shelves in place and !voila! I should've done this years ago....read more

Your Price
$27.78
Bake Element - terminal depth of 13 inches
(227)
PartSelect Number PS438018
Manufacturer Part Number 316075103
This bake element is used in electric ovens and ranges. It can be found in the bottom of the appliance. It supplies the heat required for baking. If your element is no longer glowing red, or your oven is not heating properly while the bake feature is being used, the element might be faulty. It features push-on male terminals, which are 1/4-inch high temperature spade connectors. The bake element is approximately 19 1/4 inches wide, and it measures approximately 15 inches deep from the front of the element to the bracket. It extends 3 1/2 inches past the bracket to the terminals. Unplug your appliance before you begin this repair.
Fixes these symptoms
Element will not heat
Little to no heat when baking
Little to no heat when broiling

See more...
Installation Instructions
David from Shawnee, KS says,

Oven woudn't heat
1. Removed two screws, pulled out the element, voltage tested the element and determined it was an open circuit (bad element).
2. Ordered the part from partselect.com
3. Disconnected elem...read more

Your Price
$36.57
Door Shelf Retainer Bar
(19)
PartSelect Number PS734936
Manufacturer Part Number 240534701
The door shelf retainer bar is also referred to as a refrigerator door rack. This piece is used as an attachment on the inside of your refrigerator door. The refrigerator door rack acts a shelf to hold small items in your fridge, such as condiments. This specific model is easy to replace as it is sold individually and snaps into place in your refrigerator without screws. When installing the door shelf retainer bar you will not need any tools. Users ranked this installation as easy and it takes less than fifteen minutes to do.
Fixes these symptoms
Door won’t open or close


Installation Instructions
Lannie from Buffalo, WY says,

door rack was broken
pulled broke rack off, snapped new one in place. Yeah!! No more broken jars on the floor....read more

Your Price
$5.42
Crisper Cover Support - Front
(53)
PartSelect Number PS2358880
Manufacturer Part Number 241993101
This crisper cover front support is used to keep the crisper shelf in place, and may need replacing if the door will not open or close. This part can be used for the front support and mounts to the inside cabinet wall. Replacing this part is an easy repair, and will require a small flat blade screwdriver, a putty knife, and a soft hammer. Remove the crisper and shelf from the refrigerator before replacing the support. The crisper cover front support is held in place with a locking pin. To remove the old part, you will first need to push the pin into the interior of the cabinet using the screwdriver, and then you can pull the support out with a putty knife. After removing the pin and attaching the new support, simply use the soft hammer to lock the new pin in place.
Fixes these symptoms
Door won’t open or close


Installation Instructions
Peter from Amherst, NY says,

Support studs were broken
Used pliers to remove the residual broken stud that was still attached to the wall of the refrigerator, and then just pushed the new part in place. The longest time was spent in removing the food an...read more

Your Price
$9.49
Thermal Fuse
(207)
PartSelect Number PS11741460
Manufacturer Part Number WP3392519
This thermal fuse is used in dryers as a safety mechanism that stops the flow of electricity to the motor circuit when a dryer overheats. This replacement part features two 3/16 inch terminals, and is sold individually. When this fuse is faulty, your dryer will not start or it will not heat properly. This is a one-time fuse, meaning it cannot be re-set. It must be replaced when there is no longer continuity between the terminals. It attaches to the blower wheel housing. Blown fuses can be caused by clogged dryer vents. We recommend checking to make sure all of the vents are clear when you perform this repair.
Fixes these symptoms
Heat stays on after drum has stopped
No heat or not enough heat
Shuts off too soon

See more...
Installation Instructions
ANTHONY from CHESHIRE, CT says,

Dryer was working, but no heat.
First I unplugged the dryer, then removed the back panel, this exposed most all of the wiring and I could see the heater coils.
Not knowing what the problem was I started looking at the coils and...read more

Your Price
$109.47
Replacement Ice Maker
(55)
PartSelect Number PS2121513
Manufacturer Part Number D7824706Q
This is a replacement ice maker. This assembly includes the ice mold and the control device. The water inlet valve pumps water into the mold, which stays there until it is frozen solid and ejected into the storage bucket. The process continues until the bucket is full. This replacement part does not include the cover, shut off arm, wire harness, or the mounting hardware. You will need to use the existing pieces, or order those separately. You will need a nut driver to successfully install this part. Unplug your appliance before you begin any repair work.
Fixes these symptoms
Ice maker dispenses too little ice
Ice maker dispenses too much ice
Ice maker not making ice

See more...
Installation Instructions
Bernie from Diamond Bar, CA says,

Icemaker producing few or no cubes and often leaving "kling-ons" on ice tray
Interior surface of ice tray felt rough & flaky (coating deteriorated) so cubes would not release.
Unplug appliance.
Remove timer cover by hand pressure @ edge.
Remove single attachment...read more

Your Price
$13.53
'M' Series New Style Coil Kit
(60)
PartSelect Number PS334310
Manufacturer Part Number 279834
This is an M series new style coil kit, used in gas dryers. When the igniter reaches a high enough temperature, these coils work together to let the gas enter the dryer. The coils open the gas valve; if the valve does not open the heating element will not ignite. Both coils must be operational for the valve to open. This is a safety mechanism to ensure that there are no unsafe buildups of gas inside your appliance. This kit comes with a three-terminal boost/hold coil, and a two-terminal main coil. Each part is approximately 1 1/4 inches in diameter. If the igniter glows but shuts off without igniting gas, it means one of the two valves is faulty. We recommend you replace these as a set. Before you begin this repair, unplug your appliance and shut off the gas supply.
Fixes these symptoms
No heat or not enough heat
Noisy
Shuts off too soon

See more...
Installation Instructions
Michael from Kirkwood, MO says,

Gas Dryer would not ignite
1. Removed lint screen and holder frame. Unplugged the electrical cord and closed the gas valve in the line before it goes into the dryer.
2. Removed two bolts at bottom front of machine and took...read more

Your Price
$80.03
Crisper Pan
(15)
PartSelect Number PS429854
Manufacturer Part Number 240337103
This crisper pan, also known as a drawer, is a genuine OEM replacement part for your refrigerator. Installing this part is easy and requires no tools. Simply slide out the existing drawer and install the new one.
Fixes these symptoms
Door won’t open or close


Installation Instructions
Melody from Hammond, IN says,

pan-crisper broke / drawer support rail broke
pan-crisper pan was easy because is just slide in. the drawer support rail just took a screwdriver to unscrew the screw and replace it with new rail and put the screw back in. The thing I like the b...read more