See part 24 in the diagram
( Grid squares measure 1x1 inch )
Lower Spray Arm
$25.23
On Order
On Order
Get this part fast. Average delivery time via standard shipping: 1.8 days.
PartSelect Number PS12585623
Manufacturer Part Number 5304517203
Manufactured by
Frigidaire
Product Description
Lower Spray Arm Specifications
The Lower Spray Arm is used in your dishwasher to spray water and clean your dishes. If broken there will be visible damage or your dishes may no longer be cleaned properly. If your spray arm is broken (due to general wear or high heat), it should be replaced. Your lower spray arm will be located at the bottom of your dishwasher tub. Check your user manual and model number to ensure this model is right for you. This version is plastic and metal and comes in gray/blue. We recommend you wear work gloves to keep your hands safe when installing and disconnect power to the appliance. You will also want to make sure that you turn off the water supply to your dishwasher. From here, you will want to open the dishwasher, pull out the lower rack and set it aside. Remove the lower wash arm. On each side of the bottom of the spray arm, there are small locking tabs that can be pushed aside using a flathead screwdriver. Once released, the spray arm can easily be pulled off the dishwasher. Put the new lower wash arm in place and push it down to lock it in. Ensure it is spinning freely and does not hit the heating element. Return the lower dish rack into place and then close the dishwasher door.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Not cleaning dishes properly | Leaking | Noisy | Not draining
This part works with the following products:
Dishwasher.
This part works with the following products:
Frigidaire, Crosley, Kenmore, Kelvinator.
Part# 5304517203 replaces these:
154414102, 154568002, 5304506526
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brandon
May 27, 2019
Does this lower spray arm fit my dishwasher?
For model number FFBD2406NS0A
Hello Brandon, thank you for inquiring. Yes, this is the replacement for your model.
8 people found this helpful.
Was this helpful?
Thank you for voting!
Samuel
November 26, 2019
I'm looking for a new lower spray arm. I see these numbers on the piece : 1545677 tw asm, 1545678 tw bot, 1545680 pw asm and 1545681 pw bot.Can you help me ?
For model number FFBD2408NS0A
Hello Samuel, thank you for your question. The lower spray arm for this unit is PartSelect Number PS12585623. Please enter the part number into the site for current price and availability. Good luck with your repair!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Bill
May 29, 2019
What part # is the lower spray arm for this model dishwasher? Thx. Bill
For model number FGBD2434PW5A
Hello Bill, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12585623. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Toby
August 29, 2019
The dishwasher isn't cleaning. It pumps, drains and fills with water, but the spray arms aren't spinning. Any ideas?
For model number CDB500NW3A
Hi Toby, if it is affect all the spray arms there is mostly likely an issue with the pump motor part 154844301. Thank you for your question and good luck with your repair!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Valery
August 5, 2019
Will this spray arm be compatible with my dishwasher model # ffbd2407ls1c?
For model number FFBD2407LS1C
Hello Valerie, thank you for your question. Unfortunately, that is not the lower spray arm for your unit. The spray arm for your unit is PartSelect Number: PS1524955. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Carl
September 23, 2019
I need a lower sprayer arm for that model I just do not know what sprayer arm is for that model.
For model number FFBD2407LS0B
Hi Carl,
Thank you for your question. The part number listed under your model number for the lower spray arm is PS1524955. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
K
November 21, 2019
Hello, is this the right part for the ffbd2406nw6a model? Thanks.
For model number FFBD2406NW6A
Hi K, this is the correct part for your model. Thank you for your question and good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Sharon
3 days ago
Cleaned the filter under the spray arm and cannot get the spray arm to screw in tightly again. Right now it wobbles
For model number Fphd2481kf1
Hello Sharon, thank you for writing. We have a video for you to look at to see if there is something maybe you missed in reattaching the arm. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Trevor
October 15, 2019
Looking for a lower spray arm for this model. The Frigidaire web site actually states that the spray arm is no longer available! Is there a similar arm that will work in this model? Thanks
For model number FFBD2408NS5B
Hello Trevor, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12585623. We have the Arm in stock. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Abby
August 16, 2021
Does the bottom arm have to be replaced if it's wobbly and keeps hitting the bottom rack? I took the rack out and it cleans fine so i know it's the bottom arm. I do not see a model number on the part and i'm not sure what number to put otherwise from the stickers inside.
For model number I'm not sure how to find it.
Hi Abby,
Thank you for your question. If the lower spray arm is loose and you are unable to tighten it, then it should be replaced. If you could resubmit your question, with the model number from your dishwasher, we would be happy to help you with this. Here is a link from our website that you may reference on where to locate the model number on your dishwasher, https://www.partselect.com/Find-Your-Dishwasher-Model-Number.aspx. If you have any questions, please let us know.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Part Videos
Replacing your Frigidaire Dishwasher Lower Spray Arm
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 24 reviews.
What's this?
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
spray arm keeps melting
I have had to keep replacing the spray arm on the bottom of my dishwasher which takes like 2 seconds to do.. First you open the dishwasher and than pull the bottom basked forward and reach down and pull the spray arm up and pop the bottom of the spray arm off and put it on the new spray arm and slip it back into the dishwasher over the thing that makes it spin around.. but the tricky part is and I didn't know this and this is why my dishwasher spray arm kept falling over and melting on the heating element.. you have to turn it till it clicks in.. and your done..
-
Donna from Madison, OH -
Difficulty Level:Really Easy -
Total Repair Time:Less than 15 mins -
Parts Used:5304517203
203 of 208 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spray arm fell over and melted on the heating element.
It required no tools. It took less than one minute to connect the spray arm to the bottom of the unit. Our dishwasher is working perfectly now.
-
Inge from Hernando, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Parts Used:5304517203
73 of 82 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the old spray arm was removed to clean dishwasher, and not replaced properly, causing it to fall off and against heating element where it melted.
This was right before T'Giving. Ordered the part Wed, and it arrived on Sat morning. I had read the other comments, so thanks to the person who said to make sure you snap the new one in place and check for a snug fit, the replacement was in and working in no time at all.
-
Travis from Citrus Heights, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Parts Used:5304517203
30 of 34 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower spray arm came off and melted against the heating element
I installed the new spray arm without any tools and it worked perfectly.
-
Lisa from Fort Lauderdale, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Parts Used:5304517203
17 of 24 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The spary arm and soil trap in my diswasher fell off into the heating element. The pieces melted no longer fitting original area. Ordered the parts at PartSelect and to our amazement, the parts came the next day even though I took 3 - 5 day shipping. We were very happy that we had a new dishwasher
Took no tools. Removed the melted pieces and snapped the new ones in the machine and I was ready to start washing!!! My wife and I are very impressed with prompt and courteous professionalism of PartSelect . I will recommend them highly. I would rate this a 5 star rating, wasn't able to change that star from one to 5
-
Hector from Port CHarlotte, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
17 of 28 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old spray arm had melted and wasnt spraying
I removed the old spray arm by pulling it off of the base then I pushed the new one on and made sure it was on properly then I pit the base back into the dishwasher and it was good as new!
-
shannon from baltimore, MD
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Parts Used:5304517203
14 of 18 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washing poorly
Removed old spray arm, fitted new spray arm. VEry easy. Sorry I didn't do it months ago
-
Donal from Dunwoody, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Parts Used:5304517203
10 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower arm came off and melted.
Simple repair.
-
MICHAEL from TULSA, OK
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Parts Used:5304517203
6 of 9 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lower Spray Arm damaged
1-2-3 snapped off the old and snapped on the new! New part was just as ordered and just like original! My dishwasher is like new again! Thanks PartSelect for your great price and prompt shipment!
-
Andrea from Belle Mead, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Parts Used:5304517203
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Our spray arm had fallen onto the heating element and melter
It was super simple. I popped the clips that were holding the old spray arm on and then popped the new one in place.
-
REBEKAH from COLUMBUS, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Parts Used:5304517203
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Filter By Rating:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
JASON C - 6 days ago
works like a charm
replaced for my machine, works great
David D - August 13, 2021
Fit perfectly
Took a while to get but worked great
Scott T - June 4, 2021
Perfect replacement
Works perfect
Kathryn E - May 25, 2021
Exact fit
Part was exactly what I needed. Was surprised it was blue, but my dishwasher works so it’s all good.
Bennie D. S - March 26, 2021
Easy repair.
The past came as expected. Worked fine.
Jerry Z - March 23, 2021
Easy Peasy..
It was easy to find the part I needed and was delivered in just 4 days. Doesn't look like the original, but works perfectly.
Patrick D - February 25, 2021
Works as should watch the videos even for simple job.
Second spray arm I have bought this year 2021 alone. Fixed different issues on my own. Arm came off melted. Went to local shop installed got new one. Came off after short time. Bought form these guys this. Watched the repair video and found out where I kept going wrong.
Bettie S - February 25, 2021
easy to replace
yes i recieved my part fast and it was very easy to replace appreciate how fast i recieved it just wasnt sure what made it melt as it wasnt over the heat element thank you also i am a 80 year old lady so it had to be easy
Dimitar K - February 25, 2021
All is Ok
It's better than original that was inside
Debi D - December 22, 2020
Easy Repair
The part is exactly what I needed. Easy to fit, but it took 7 days to be delivered and I was originally informed it would take 3 to 4 days.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS12585623
Manufacturer Part Number: 5304517203
Manufacturer Part Number: 5304517203
Brand
Model Number
Description