Alpha Sander Polisher Parts
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Alpha Sander Polisher Parts
Your Price
$45.53
On Order
Alpha Sander Polisher Vane
PartSelect Number PS10261886
Manufacturer Part Number 516-25
This is an authentic component which is sourced directly from the original equipment manufacturer for use with Alpha pneumatic air polishers. The vane is made of layered fabric and laminate and is used to spin the rotor. It is designed to slowly wear down over time, to avoid damage to the cylinder. It is advised to replace all rotors at the same time for even wear. Keep in mind this high-quality vane is sold in a pack of four. Please make sure to check the appropriate diagrams of your model for the correct location and installation of these parts. You may need a screwdriver and a wrench set to take the tool apart in order to perform this repair.
Your Price
$37.25
On Order
Alpha Sander Polisher Spiral Bevel Pinion
PartSelect Number PS10261910
Manufacturer Part Number 658-25
This is a genuine item that is supplied directly from the original equipment manufacturer for Alpha polishers. It is an identical replacement for part provides a missing or a faulty component that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality spiral bevel pinion is made of durable metal and is sold individually.
Your Price
$68.35
On Order
Alpha Sander Polisher Spiral Bevel Gear
PartSelect Number PS10261905
Manufacturer Part Number 658-17
This item is an original part from Alpha for use in polishers. The spiral bevel gear attaches to the bearing. You may need a wrench when replacing this part. This item might break over time and will need replacing. It is made of durable materials and is sold individually.
Your Price
$21.97
Special Order
Alpha Sander Polisher Water Valve Assembly
PartSelect Number PS10261735
Manufacturer Part Number 210064
Your Price
$28.62
On Order
Alpha Sander Polisher Carbon Brush
PartSelect Number PS10261720
Manufacturer Part Number 210048
This replacement carbon brush is a genuine OEM sourced component that is specially designed for use with Alpha wet-dry polishers. Carbon brushes are a commonly replaced part on power tools. Due to normal use and friction brushes will gradually wear down and will require replacement. It is advised to replace both brushes at the same time. Please note this high-quality item includes two carbon brushes with attached lead wires per order.
Your Price
$63.45
In Stock
Alpha Sander Polisher Water Hose Assembly
PartSelect Number PS12006084
Manufacturer Part Number 1030-0003
This is a genuine Alpha component which is supplied by the original equipment manufacturer for use with pneumatic air polishers. The hose connects to the unit for the water to travel through. Over time it may wear out or get damaged eventually requiring a replacement. Refer to the owner's manual for your model to ensure the correct application. Keep in mind this high-quality water hose assembly is sold as an individual item.
Your Price
$40.35
In Stock
Alpha Sander Polisher Exhaust Hose (leather)
PartSelect Number PS12006141
Manufacturer Part Number 658-95
An authentic OEM sourced part that is supplied for use with Alpha pneumatic air polishers. This is a high-quality replacement for a missing or damaged exhaust hose included with the new unit, make sure to refer to the appropriate diagrams of your model for the correct application of his component. It is made of high-quality leather material and is sold individually.
Your Price
$6.40
In Stock
Alpha Sander Polisher Half Moon Key
PartSelect Number PS10261907
Manufacturer Part Number 658-22
This is a genuine Alpha replacement part. The half moon key is designed by the manufacturer for use in pneumatic air polishers. This part is made of metal, and is used to secure the spiral bevel gear in place on the gear shaft. You may require a screwdriver when replacing this item. It is advisable when removing multiple parts to keep careful track of their order so they can be reassembled correctly. This part is sold individually.
Your Price
$6.78
Special Order
Your Price
$17.13
In Stock
Alpha Sander Polisher 5/8 Nozzle
PartSelect Number PS10261909
Manufacturer Part Number 658-24
This is an authentic Alpha part made for use in air polishers. This brass nozzle fits into the gear shaft/spindle with an O-ring (part # 658-23) in between to prevent leaks and pressure loss. This nozzle is sold individually.
Alpha Sander Polisher Appliance Types
Popular Alpha Sander Polisher Models
Below are the most popular Alpha Sander Polisher models we have. Enter your model number in the search box to find your model.
- VSP-120 Polisher
- VSP-320 (1) Wet Polisher, Variable Speed
- VSP-340 (230v) Vsp-340 (230v) Spare Parts
- WDP-120 Wet-Dry Polisher
- AIR-680 (Version 2) Pneumatic Air Polisher
- AIR-658 (Type 3) () Pneumatic Air Polisher
- VSP-220 Polisher
- Air-658 (Type 5) Pnuematic Air Polisher
- VSP-110 Polisher
- AWP-158 Wet Portable Electric Polisher
- VDP-700 Vdp-700 Spare Parts
- VSP-230 Vari-Speed Wet Polisher
- WDP-320 Wdp-320 Spare Parts
- AIR-300 Mini Air Polisher
- BAB1590 (Version 1) Beveling Auxiliary Base
- AIR-850 Pneumatic Polisher