Band Saw Blades

Band Saw Blade Pulley Tire This is a Genuine Milwaukee part It is sold individually Two tires are needed on the Bandsaw. If one tire is worn, it is advisable to replace both at the same time. The purpose of the Blade Pulley Tire is to keep the blade tracking correctly. Over time they will become brittle or stretched out. You then will have the problem of the blade coming off the pulleys or not tracking properly. The tires simply stretch onto the pulleys. No tear down of any parts is needed.

Band Saw Front Blade Guide Assembly This is a genuine Milwaukee replacement part, it is sold individually. It is used on all the Bandsaw models shown below. The purpose of the Front Blade Guide Assembly, is to keep the blade on the bandsaw blade tracking straight as you are cutting.. It also helps track the blade on the blade pulley. If your Blade Guide Block is in good shape and just the bearings are worn. You can order them individually under part number 02-25-0260. These fit both the Front and Back Guide Block. There are six per tool.

Band Saw Blade Pulley Genuine Milwaukee replacement part, this item is sold individually. This is the part of the Portable Bandsaws listed below that the blade is installed on. The part number 45-69-0010 Blade Pulley Tire must be used with the pulley for the blade to track properly.

Band Saw Blade

★★★★★

★★★★★

1 Review

Band Saw Blade Guide-carbide This part is an OEM from the Wilton manufacturer. The carbine blade guard is compatible with many band saw devices. The plastic item is fitted on each side of the saw head's support bracket, keeping the blade straight for cutting projects. A pair of pliers and a screwdriver may be helpful for making the repair. The carbine blade guard is sold individually.

Band Saw Bandsaw Blade <style type="text/css"> <!-- .style1 {font-size: 11px} .style5 {font-size: 11px; font-weight: bold; } --> </style> <div> <p class="style1"> Band Saw Blade Bi-Metal 14 Teeth per Inch 44-7/8 in. Milwaukee Bi-Metal Super-Tough Band Saw blades outlast conventional blades up to 3 times, requiring fewer blade changes. An extremely hard and uniform tooth point is electron beam welded to a tough durable backing with high flex life for faster cutting and longer blade life. Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel and tougher steels including stainless, chrome, tungsten steel plus other problem material at slow speed. Includes one blade. <table cellpadding="0" cellspacing="0" bgcolor="#000000"> <tr> <td> <span class="style1"> </span> <table width="100%" border="0" cellpadding="2" cellspacing="0" bordercolor="#000000"> <tbody> <tr> <td colspan="3" bgcolor="#FFFFFF" class="style1">Features</td> </tr> <tr> <td bgcolor="#FFFFFF" class="style1"> • </td> <td bgcolor="#FFFFFF" class="style1"> 14 TPI, Bi-Metal Construction</td> </tr> <tr> <td bgcolor="#FFFFFF" class="style1"> • </td> <td bgcolor="#FFFFFF" class="style1"> Matrix II high speed steel teeth with 8% cobalt</td> </tr> <tr> <td bgcolor="#FFFFFF" class="style1"> • </td> <td bgcolor="#FFFFFF" class="style1"> For cutting stock 3/16 in. to 5/16 in. thick</td> </tr> <tr> <td bgcolor="#FFFFFF" class="style1"> • </td> <td bgcolor="#FFFFFF" class="style1"> For use with portable band saws using 44-7/8 in. x 1/2 in. x .020 in. blades</td> </tr> </tbody> </table></td> </tr> </table>

Band Saw Blade Release Shaft The blade release shaft goes between the needle bearing and the front pulley guard. It is made out of metal and is sold individually. This is an OEM Milwaukee part directly sourced from the manufacturer for use in bandsaws. When replacing this part an allen wrench might be required during the installation process. It will require replacing if it breaks.

Band Saw Blade This is a genuine item that is supplied directly from the original equipment manufacturer for use with Jet bandsaws. It is a high-quality replacement for a worn or missing blade that is used to cut the material, please make sure to refer to the owners manual for the correct application of this component. To free up the old bandsaw blade, simply remove the tension from the blade and the parts holding it in the saw. Please note this part is made of durable metal and is sold individually.

Band Saw Saw Blade

Band Saw Blade (62 In. X 6 Mm 0.3t) It is an authentic OEM sourced replacement part that is specially produced for use with a Ryobi band saw. This is a standard 1/4 in. high-quality steel blade that is sold individually. Adjustments of blade tension can be made at anytime. Thicker workpieces require higher tension, however maximum tension is not needed for all cuts. Too little tension may cause the blade to slip on the wheels and too much tension may cause the blade to break.