6527 (TYPE C) Milwaukee Reciprocating Saw - Overview

Genuine Milwaukee replacement part Includes 1 Carbon Brush sold individually. Please go to the schematic listings for your tool to find the brush assembly parts compatible with this carbon brush and your tool. This carbon brush will fit a wide variety of Milwaukee tools. • Worn brushes are frequently the cause of a poorly running moto...Read morer. • Replacing brushes can fix an intermittently operating motor. • New brushes can restore a motor's electric braking. Carbon motor brushes are one of the most commonly replaced power tool parts. The reason is that carbon brushes are wear items, meaning that through friction and use they will gradually wear away and eventually will need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, also check your armature for burns, cracks, or other damage which are indications of a larger motor problem needing attention.

This Milwaukee Quik-Lok® cord is a genuine OEM replacement part, it is sold individually. This is a three wire grounded 8 foot cord for fast field replacement of a damaged cord. Made of premium grade Hi-Flex wire the cord is quickly removed and attached to Milwaukee tools with the Quik-Lok® cord feature. To change a damaged cord simply...Read more turn the collar at the top of the cord counter clockwise to loosen the nut and pull down on the cord to remove. To re-attach a new cord, line up the pins in the end of the tool with the pin receptacles in the end of the cord, push together and turn the collar clockwise to lock in place. The Cord has a 5-15P NEMA type plug.

Genuine Milwaukee replacement part, this item is sold individually. The purpose of the Brush Retaining Screw or Brush Cap, is to secure the brushes and keep the brush tight against the armature in the housings of the tool models shown below.

It is an identical replacement for the original hardware that was installed on a new equipment. The screw is a standard component which may have multiple applications. Check the parts diagrams for your specific model to ensure the correct repair procedure. This high-quality screw is made of durable metal and is sold as an individual item....Read more It is supplied by the original manufacturer for Milwaukee equipment. Note, a screwdriver will be needed to secure or remove it.

This is a genuine OEM replacement part. This steel bearing is used in a variety of Milwaukee handheld power tools including rotary hammers and Sawzalls. Ball bearings serve to separate and buffer moving parts. They also assist with directional stability. They are therefore a high-wear part that is replaced regularly. This item is sold individually. Retaining rings and spacers sold separately.

This is an authentic manufacturer sourced replacement brush holder assembly that is utilized on Milwaukee power tools. This part is designed to secure two carbon brushes around the armature to provide stable and safe contact. Please note carbon brushes are sold separately. One durable plastic brush holder assembly is included per order.

This is a genuine Milwaukee replacement part that is intended to be used with sawzall reciprocating saws. This item is used to cover the front port in the gearcase assembly. A screwdriver and pliers may be needed to install this item and it is priced as a single part.