GE/GE_Thumb/00123968i01.gif
See part 19 in the diagram
Replacing your Hotpoint Dryer Knob and Clip play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.com

Knob and Clip

★★★★★
★★★★★
25 Reviews
$13.76   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS1482289
Manufacturer Part Number WH01X10313
Manufactured by GE
Product Description

Knob and Clip Specifications

This knob accepts a D-shaped shaft.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Timer will not advance | Will Not Start
This part works with the following products:
Dryer, Washer.
This part works with the following products:
Hotpoint, General Electric.
Part# WH01X10313 replaces these:
AP3995201, 1264406
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

12 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lori
February 27, 2018
The timer control knob broke on my Hotpoint dryer. Unfortunately i did not replace this right away, instead, used a needle nosed plier to grasp and turn the d shaped shaft mechanism. Now this mechanism (the d shaped shaft) has broken and i need to replace. Please advise me.... is it possible to order just a new d shaped shaft plus timer control knob or do i need to order a whole new timer shaft??
For model number HTDX100Ed6WW
Hi Lori, Thank you for your question. In order to replace the shaft, you will need to get a new timer. The part number listed under your model number for the timer is PS8746223. The part number listed under your model number for the timer knob is PS1482196. I hope this helps. Thank you and have a great day!

10 people found this helpful.

Was this helpful?
Thank you for voting!
Diane
September 14, 2017
I need a replacement for the knob on my washer. Do I need part #ps1482289
For model number HTWP1400
Hi Diane, Thank you for the question. This is the correct knob for your model number and it would control one of the three switches on the left side of the control panel. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Erving
March 2, 2020
What is the part number for the temperature control knob and the timer knob?
For model number HTDX100EM8WW
Hello and thank you for writing. The timer knob is part number # PS1482196. The control knob is part number # PS1482289. We hope this information helps. Please contact us anytime if you require further assistance.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
David
July 24, 2017
My Hotpoint dryer model#: Htdx100ed3ww with serial#: Za813983c timer control knob must have wore out it is cracked on the plastic part on the back where it can be slid on and off of the shaft. Can you tell me the replacement part number that will work on my dryer.
For model number HTDX100ED3WW
Hello David, thank you for contacting us. The timer control knob for your model is PartSelect Number PS1482196. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Kathy
November 6, 2017
How do you get the knob off. The 2 left knobs just pull off. The setting control for casual and whites to get the machine to run does not come off? Is it easy to replace?
For model number VLSR1090G5WW
Hi Kathy, Thank you for the question. The 3 left knobs shoudl all just pull off.For the main timer knob you need to use a pair of needle nose pliers to pull the locking in on the back of the timer switch to release the knob. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Bryan
May 21, 2019
The male piece coming from the pressure switch (part#ps1018030) broke off into the knob (part#ps1482289). Is it necessary then that i'll need to replace the pressure switch, knob & clip, as well as the d shaped knob clip?Was hoping there would be a video to illustrate how to remove the backsplash cover :( i look forward to hearing from you! sincerely, bryan
For model number HTWP1400F1WW
Hi Bryan, thank you for your question. You would have to replace the switch. If you cannot remove the old shaft from the knob then you would have to replace the knob as well. The d shaped clip actually comes with the knob so you do not have to order that separately. Here is a video on how to open up that control area: https://youtu.be/npXw3mRMLR0. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Jen
July 10, 2019
There was a metal piece sticking out of where the temperature knob should go - it seems to have fallen back into the hole - is there an easy way to get it out or will i not be able to use that control anymore?
For model number HTDX100EM8WW
Hello Jen, Thank you for the question. The metal shaft is part of a switch behind the panel. You will need to open the panel to reattach the switch or replace of broken. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Kelly
October 23, 2019
Which knob do i need for the main control?
For model number HTAP1100F
Hello Kelly, thank you for your question. The knob is Part #: PS1482290 and the dial behind the knob is Part #: PS1482361. I hope this helps!

Was this helpful?
Thank you for voting!
Sandra
June 3, 2019
Please advise with the part number for a replacement knob on my Hotpoint model htdx100em1ww dryer.The knob plastic is broken inside as well the metal ring inside the knob fitting. also, prior to the knob breaking the wrinkle free cycle and cottons cycle were not heating. please advise on what part is needed to repair this problem. or will replacing the knob correct the problem. thank you for your assistance. best regards, sandra
For model number HTDX100EM1WW
Hi Sandra, thank you for your question. I have linked the correct timer knob for your appliance below. Looking at your model information there are a few parts that you should take out and test to see which one is giving you the issue. The first parts to check in this case would be all of your thermostats and thermal fuses. You can test those parts with a multi meter and they should be reading 0 ohms to be working correctly. If those parts are fine, you should then go on to testing your heating element as well. You can also test that with a multi meter and it should be reading between 0 - 50 ohms. Something else you should also check would be your filter and ducts. Make sure there is absolutely no blockage that would restrict air flow in your appliance. I hope that helps. Good luck with your repair.

Was this helpful?
Thank you for voting!
Related Parts:
Aiden
June 17, 2019
The metal peice broke off into the knob of the start knob so what do i do
For model number HTDP120ED0WW
Hello Aiden, thank you for writing. For your model the replacement D-Shaped Knob Insert Clip is part PS267091. If you cannot get it out and need to replace the Knob as well, then both can be purchased as this Knob and Clip part PS1482289 for your model. We hope this helps.

Was this helpful?
Thank you for voting!
Part Videos

Replacing your Hotpoint Dryer Knob and Clip

Replacing your Hotpoint Dryer Knob and Clip play video
Customer Repair Stories
 Average Repair Rating: 5.0 / 5.0, 4 reviews. What's this?
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    broken knob that turned too freely and did nothing
    I wasn't sure that a new knob/clip would fix problem b/c shaft wouldn't turn with pliers. But knob was so inexpensive I wanted to try it first. I received the new knob/clip and the dryer worked perfectly; the knob had been broken for a year before it had quit working entirely. Don't let someone tell you that you need a whole new timer before you try the new knob/clip. Still working perfectly and I'm so pleased. And my part arrived within 2 days-wonderful!
    • Terri from DADEVILLE, AL
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      Less than 15 mins
    • Parts Used:
      WH01X10313
    14 of 14 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Old knobs were cracked would not turn the timers
    Slid off the old part and slid back on the new
    • Jim from KINGMAN, AZ
    • Difficulty Level:
      Very Easy
    • Total Repair Time:
      Less than 15 mins
    • Parts Used:
      WH01X10313, WE1M652
    6 of 6 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    Knob and clip both broken
    I just removed old parts And put the new part on it was very easy to do.
    • Sharon from LAKE CITY, SC
    • Difficulty Level:
      Very Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
      Screw drivers
    • Parts Used:
      WH01X10313
    2 of 2 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    timer knob and on/off knobs split at base, not engaging
    Popped off old knobs, popped in new. Sorry, nothin' to it or I would'a yelled HELP!
    • Karen from THIBODAUX, LA
    • Difficulty Level:
      Very Easy
    • Total Repair Time:
      Less than 15 mins
    • Parts Used:
      WH01X10313, WE1M652
    1 person found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      25 Reviews
      4.2
      Filter By Rating:
      • 5 Stars
        17
      • 4 Stars
        3
      • 3 Stars
        1
      • 2 Stars
        1
      • 1 Star
        3
      Sort by:
      Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
      Model Cross Reference
      This part works with the following models:
      PartSelect Number: PS1482289
      Manufacturer Part Number: WH01X10313
      Brand
      Model Number
      Description
      Hotpoint
      HLSR1090J5WW
      Washer - Residential
      Hotpoint
      HLSR1090J6WW
      Washer - Residential
      Hotpoint
      HLSR1090J7WW
      Washer - Residential
      Hotpoint
      HLSR1090J8WW
      Washer - Residential
      Hotpoint
      HNSR3110H0WW
      Washer - Residential
      Hotpoint
      HSWP1000M2WW
      Washer
      Hotpoint
      HSWP1000M3WW
      Washer
      Hotpoint
      HSWP1000M4WW
      Washer - WASHER
      Hotpoint
      HTAP1000M0WW
      Washer - Residential
      Hotpoint
      HTAP1000M1WW
      Washer
      Hotpoint
      HTAP1000M2WW
      Washer
      General Electric
      HTAP1100F0WW
      Washer
      General Electric
      HTAP1100F1WW
      Washer
      Hotpoint
      HTAP1200D0WW
      Washer
      General Electric
      HTAP1200D1WW
      Washer
      Hotpoint
      HTDP120ED0WW
      Dryer
      General Electric
      HTDP120ED1WW
      Dryer
      General Electric
      HTDP120ED2WW
      Dryer
      Hotpoint
      HTDP120ED3WW
      Dryer - ELECTRIC DRYER
      Hotpoint
      HTDP120ED4WW
      Dryer - ELECTRIC DRYER
      Hotpoint
      HTDP120ED5WW
      Dryer - ELECTRIC DRYER
      Hotpoint
      HTDP120ED6WW
      Dryer - ELECTRIC DRYER
      Hotpoint
      HTDP120GD0WW
      Dryer
      General Electric
      HTDP120GD1WW
      Dryer
      Hotpoint
      HTDP120GD2WW
      Dryer - GAS DRYER
      Hotpoint
      HTDP120GD3WW
      Dryer - GAS DRYER
      Hotpoint
      HTDP120GD4WW
      Dryer - GAS DRYER
      Hotpoint
      HTDP120GD5WW
      Dryer - GAS DRYER
      Hotpoint
      HTDP120GD6WW
      Dryer - GAS DRYER
      Hotpoint
      HTDX100ED0WW
      Dryer

      Get in touch, we're here to help!

      Open until 1am EST

      Contact Customer Service