General Electric Dryer Igniters

Your Price

$125.62

General Electric Dryer Gas Igniter

★★★★★

3 Reviews

PartSelect Number PS3527801

Manufacturer Part Number 5318EL3001A

This spiral-style gas burner igniter is designed for use in select gas dryers and plays a crucial role in generating the heat needed to dry clothes. Operating at 120 volts, the igniter glows red hot during the drying cycle to ignite the gas that heats the drum. If your dryer runs but fails to produce heat, the igniter may be faulty and should be replaced. The assembly includes the igniter, bracket, wire harness, and plug for straightforward installation. Always disconnect the dryer from power before beginning any repairs to ensure safety.

Fixes these symptoms

Not Heating
See more...

Installation Instructions

Barbara from CUDAHY, WI

no heat

I replaced the thermistor, then the gas ignitor which were easy to get to once the drum was out. The gas is still not igniting so not sure where to go from here. Putting the drum belt back on took some muscle. But then I'm 71. Read more...

Your Price

$59.47

General Electric Dryer Igniter

★★★★★

3 Reviews

PartSelect Number PS12342916

Manufacturer Part Number WE04X25996

This gas dryer igniter is a critical ignition component designed to safely and reliably light the burner during the drying cycle. Positioned near the burner assembly, it generates the necessary heat to ignite the gas, enabling consistent airflow and effective moisture removal. Constructed for durability and precision, the igniter supports efficient dryer operation and helps maintain optimal drying performance. A malfunctioning igniter may result in the dryer failing to heat, extended drying times, or incomplete cycles. Replacing this part restores proper ignition and contributes to energy-efficient appliance function.

Fixes these symptoms

Not Heating
See more...

Installation Instructions

Gary L. from Freeport, IL

The dryer drum turned ok, but the gas heat did not start.

First I found and watched three videos on how to open the dryer and replace the igniter.
Then I opened the dryer, but I did not remove the belt as suggested in the video, and then I removed the ignitor and flame detecter as the videos had shown.
I got on-line and ordered the new parts from PartsSelect in the afternoon and had them in my hands the next morning by 9:30 am.
I installed the new parts and everything worked fine again. You must be very careful with the igniter to not touch it with hands or anything else. I practiced puting in the old parts first. Read more...

Your Price

$47.40

General Electric Dryer Gas Igniter

★★★★★

4 Reviews

PartSelect Number PS268028

Manufacturer Part Number WE4X444

Be very careful to not handle the igniter by its gray part. Hold it by its white tip only.

Installation Instructions

Jeff from Seattle, WA

Gas dryer heat would not come on

Unplugged dryer, opened lower panel. Loosened the bolt that holds igniter assembly to gas unit and removed old igniter. Put new igniter in the pinch clamp then (being VERY careful so as not to crack new part) replaced igniter assembly and tightened its bolt firmly. Voilà, ignition! Read more...

Your Price

$111.83

General Electric Dryer Gas Igniter Assembly

PartSelect Number PS2364812

Manufacturer Part Number WE4M449

This gas igniter assembly is essential for a dryer’s heating function, as it ignites the gas burner to produce heat during the drying cycle. The igniter heats to a bright glow, triggering the burner flame for consistent drying performance. If your dryer runs but does not heat, or if the burner never lights, the igniter may be faulty. Other signs include extended drying times or visible wear on the igniter. Built for durability, this component ensures reliable ignition and proper operation. Installation should be performed after disconnecting power and gas supply for safety.

Your Price

$55.23

General Electric Dryer Igniter Flat

PartSelect Number PS8756667

Manufacturer Part Number WE04X10183

Introducing the GE Flat Igniter, an essential piece for your GE appliances. Made by the trusted brand GE, this igniter is made with precision, ensuring an optimal performance level, built for durability, and compiled with the highest quality materials. This flat igniter is perfect for situations where a swift and efficient solution is required. It's designed to meet all GE original specifications, ensuring perfect compatibility and fit for your device. Elevate your appliance's functionality with this prime GE Flat Igniter. Experience the difference for yourself, knowing that your appliances are functioning with the reliability of GE.