General Electric Dryer Drawers and Glides

Your Price

$19.95

General Electric Dryer Drum Slide

★★★★★

4 Reviews

PartSelect Number PS267877

Manufacturer Part Number WE3X87

This front drum slide bearing is designed to support the smooth rotation of the dryer drum by providing a low-friction surface along the front panel’s felt seal. It plays a critical role in reducing operational noise and preventing internal damage by stabilizing the drum during use. Typically, three slide bearings are required per dryer, and it is recommended to replace all simultaneously to ensure optimal performance. Common signs of wear include squeaking or grinding noises, uneven drum movement, or difficulty turning the drum manually. If left unaddressed, a worn bearing may lead to fabric damage or further mechanical issues. Installation involves accessing the front panel of the dryer and positioning the bearing along the felt seal to ensure proper alignment and support.

Fixes these symptoms

Marks left on clothes
Noisy
See more...

Installation Instructions

Henery from Ramsey, NJ

Loud scraping noise when drum rotated

1. Opened door.
2. Using phillips head screwdriver. Removed two screws holding down top of machine.
3. Swung machine top lid back.
4. Disconnect two wires from door switch.
5. Using socket wrench removed two hex head machine screws holding front panel onto machine.
6. While reaching in through door to hold drum, Swung entire front panel down and away from machine and carefully rested drum on frame.
7. Using flat head screwdriver, pryed worn drum bearing off of front panel.
8. Removed Support Spanner (white flexible plastic piece approx 8" x 2") from old drum bearing and put on new drum bearing.
9. Put new teflon drum slides (this model takes 3) on replacement drum bearings.
10. Snapped new drum bearing in place on front panel.
11. Reverse step 1-6 above.
TIME: APPROX 20-30 MINUTES. Read more...