General Electric Dryer Filters
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular General Electric Dryer Filters
Your Price
$50.42
In Stock
General Electric Dryer Lint Filter
PartSelect Number PS11763056
Manufacturer Part Number WE03X23881
This lint filter is a genuine OEM component designed for use in both electric and gas clothes dryers. It plays a critical role in maintaining proper airflow by capturing lint and debris during drying cycles, helping prevent duct obstructions and reducing fire risk. Regular cleaning is essential to ensure efficient operation and faster drying times. If the filter’s screen is torn, the casing is cracked, or drying performance has declined, replacement is recommended. Installation is simple and tool-free—just remove the old filter as you would for cleaning, and insert the new one into the designated slot. This part is sold individually and is compatible with a wide range of dryer models.
Fixes these symptoms
- Door won’t close
- See more...
Installation Instructions
Lisha|Lamb from SHELDON, MO
Your Price
$58.87
In Stock
General Electric Dryer Lint Filter
PartSelect Number PS16873779
Manufacturer Part Number WE16X32537
This is a manufacturer certified lint filter for your dryer. Lint filters are designed to catch and trap any excess lint or fabric from your clothes during the drying cycle. If you are noticing increased drying time or damp clothes when the drying cycle is finished, check to ensure the lint filter is not damaged, and clean your dryer. This lint filter features a gray plastic housing and a mesh filter, and simply slides into the lint filter slot in your dryer. This filter is an OEM part and is sold individually.
Installation Instructions
Leo from PURCELLVILLE, VA
Your Price
$81.05
In Stock
General Electric Dryer Lint Chute Assembly
My repair went off without a hitch.
2 screws removed to remove top.
4 screws removed from inside to remove front panel w/ door.
4 screws removed from top of control panel, loosed and popped top right off.
Flathead screwdriver to pop off old plastic panel.
Removed old wire chase (plastic, approx 3” long).
Removed built-up lint, wiped down area for new duct.
Snapped new duct on.
Dryer works like new!!
Took about 35 minutes, most of time spent cleaning up inside of dryer from lint due to broken duct.
One problem was that salesperson sold me on a new felt strip to go with new duct. That felt comes already installed on the new duct so I did not need it. Cost me a few extra dollars I did not need to spend.
Other than that, easy ordering, fast shipment, and parts are as close to original as possible.
Thanks for all your help! Read more...
PartSelect Number PS11763093
Manufacturer Part Number WE14X25080
This lint chute assembly is a genuine replacement component designed for GE and Hotpoint dryers. It plays a critical role in directing exhaust airflow from the dryer drum to the blower wheel, ensuring efficient drying performance. The assembly houses the lint filter and helps maintain proper airflow, which is essential for preventing overheating and reducing drying times. A damaged or clogged lint chute can restrict airflow, leading to performance issues and potential safety hazards such as lint buildup. As an OEM part, it offers a precise fit and reliable operation within compatible dryer models. Sold individually.
Fixes these symptoms
- Marks left on clothes
- Noisy
- See more...
Installation Instructions
Chad from Gilbert, SC
original duct was broken
Dear PartSelect.com,My repair went off without a hitch.
2 screws removed to remove top.
4 screws removed from inside to remove front panel w/ door.
4 screws removed from top of control panel, loosed and popped top right off.
Flathead screwdriver to pop off old plastic panel.
Removed old wire chase (plastic, approx 3” long).
Removed built-up lint, wiped down area for new duct.
Snapped new duct on.
Dryer works like new!!
Took about 35 minutes, most of time spent cleaning up inside of dryer from lint due to broken duct.
One problem was that salesperson sold me on a new felt strip to go with new duct. That felt comes already installed on the new duct so I did not need it. Cost me a few extra dollars I did not need to spend.
Other than that, easy ordering, fast shipment, and parts are as close to original as possible.
Thanks for all your help! Read more...
Your Price
$62.17
In Stock
General Electric Dryer Lint Filter - White Frame
Removed the top cover and front assembly w/door and front drum support, right where the unit was located. Had to gain rear access to loosen drum drive belt so undid the dryer vent hose to floor connection through a front acess hole. Moved the unit out to the breakfast nook as well as disconnecting the power cable from the wall socket. Removed the rear access panel covers and unhooked the drive belt. At the front removed the top screws off the lower cross member to allow spreading of the side covers to allow the removal of the drum. Removed drum and found the bearing bushing gone, reduced to powder.
Using the supplied instuction sheet, replaced the rear bearing assembly, replaced the drum after vacumming the whole interior and started the reassembly of the unit using the new belt and moved the unit back into place. Reconnected the power cable and dryer vent then lastly replaced the lint filter and selector knob. Closed the breaker and turned on the machine, no noise!!!
Incidently I am 78 years old. Thanks PartSelect. Read more...
PartSelect Number PS11767017
Manufacturer Part Number WE18X25100
This is a lint filter screen that is used for many dryers. It has a metal screen with a white plastic frame, and is approximately 13 inches wide. This part is sold individually. The lint filter traps lint while clothes are being dried and prevents the lint from building up in clothes and internal parts of your appliance. Neglecting to clean your filter on a regular basis can negatively affect the operation of your dryer and is also a fire hazard. Be sure to clean your filter on a regular basis. Installation is easy, simply slide the filter in and out of the filter slot.
Fixes these symptoms
- Marks left on clothes
- Noisy
- Too hot
- See more...
Installation Instructions
Edwin from Seattle, WA
Dryer making grinding noises
We live in a Condominium, space is tight especially in the Utility room where the washer/dryer are located. Turned dryer breaker off at the electical panel. Removed the top cover and front assembly w/door and front drum support, right where the unit was located. Had to gain rear access to loosen drum drive belt so undid the dryer vent hose to floor connection through a front acess hole. Moved the unit out to the breakfast nook as well as disconnecting the power cable from the wall socket. Removed the rear access panel covers and unhooked the drive belt. At the front removed the top screws off the lower cross member to allow spreading of the side covers to allow the removal of the drum. Removed drum and found the bearing bushing gone, reduced to powder.
Using the supplied instuction sheet, replaced the rear bearing assembly, replaced the drum after vacumming the whole interior and started the reassembly of the unit using the new belt and moved the unit back into place. Reconnected the power cable and dryer vent then lastly replaced the lint filter and selector knob. Closed the breaker and turned on the machine, no noise!!!
Incidently I am 78 years old. Thanks PartSelect. Read more...
Your Price
$56.00
In Stock
General Electric Dryer Lint Trap Assembly
PartSelect Number PS9493083
Manufacturer Part Number WE18X20437
Maintain safe and efficient dryer performance with this lint trap assembly, designed to capture lint and debris from the exhaust airflow. This genuine OEM component plays a critical role in preventing clogs and reducing fire hazards by keeping lint out of the venting system. It supports proper airflow, shortens drying times, and helps extend the life of the appliance. Constructed from durable materials, the lint trap is built for long-term use and easy maintenance. Installation is straightforward and should be matched to your appliance model for compatibility.
Your Price
$60.55
In Stock
General Electric Dryer Lint Filter
PartSelect Number PS11774537
Manufacturer Part Number WE18X25102
This lint filter, also referred to as a lint screen, is specially designed for various models of dryers and washer/dryer combos. It is responsible for capturing lint and debris from clothing during the drying cycle and preventing it from clogging the dryer vent. If the filter is damaged and no longer able to carry out this function you may notice longer dryer times, overheating, and excessive lint build up in the dryer vent, which creates the risk of a fire hazard. Regular cleaning and maintenance of the lint filter are essential to keep the dryer operating efficiently and safely. It is recommended to clean the filter after every use.
Your Price
$29.69
In Stock
General Electric Dryer Lint Filter
PartSelect Number PS12296330
Manufacturer Part Number WE18X26383
This lint filter is a genuine replacement screen designed to trap lint and debris in your compact dryer, helping maintain strong airflow, shorten drying times, and support safe operation. It’s made from durable materials for long-term use and installs easily by sliding into the dryer’s lint housing. Replacing a worn or damaged filter is a simple way to keep your dryer running efficiently and reduce the risk of blockages. Be sure to check your model number to ensure this filter is the right fit for your appliance.
Your Price
$62.16
In Stock
General Electric Dryer Lint Filter
PartSelect Number PS8756761
Manufacturer Part Number WE18M54
Keep your GE dryer functioning optimally with this filter assembly replacement. This authentic GE lint screen is designed to effectively trap lint and debris from your dryer's exhaust air, ensuring a clean, efficient drying cycle. It is vital for maintaining optimal performance, reducing energy usage, and enhancing the lifetime of your appliance. The filter is easy to install - simply follow the instructions provided in your dryer's owner's manual. So give your GE dryer the care it deserves by installing this lint screen. This fixture ensures your fabrics get dried without compromising their quality.
Your Price
$78.52
In Stock
General Electric Dryer Lint Filter With Frame
PartSelect Number PS266269
Manufacturer Part Number WE18X54
This dryer lint filter is a genuine OEM replacement part designed for use in select GE dryer models. It plays a critical role in maintaining safe and efficient dryer operation by capturing lint, fibers, and debris during each drying cycle. By preventing buildup in the exhaust system, the filter helps reduce fire risk, improve airflow, and enhance drying performance. Constructed from durable mesh and plastic materials, it is engineered for long-term use and easy maintenance. Installation is straightforward—simply slide the filter into the designated slot in the lint housing. Regular replacement or cleaning of the lint filter is essential for optimal appliance function.
Installation Instructions
JoAnn from St Petersburg, FL
My old filter had a broken frame and ragged screen
Replacing the filter only required removing the old one and replacing it with the new part which fit perfectly. I received the part two days after placing my order.
Read more...
Your Price
$58.36
In Stock
General Electric Dryer Filter And Mesh Assembly
PartSelect Number PS12171188
Manufacturer Part Number WE18X25098
Having issues with your Whirlpool washer? This genuine OEM control-electric (CNTRL-ELEC) part is exactly what you need. It's designed just for your Whirlpool machine, ensuring a perfect fit and flawless performance. Your washer isn't just a big box?it's an intricate assembly of parts working to keep your clothes fresh and clean. And this important piece? It's the brain behind your washer?s operations. You tell it what you want via the cycle settings, and this CNTRL-ELEC part makes it happen. It even powers your washer's display, putting all the control at your fingertips. Simple to install, this component will quickly get your washer back to performing at its best. Remember to protect yourself by unplugging your washer before starting. A pair of work gloves can provide additional protection during installation. Choose this Whirlpool CNTRL-ELEC part and rest easy knowing your washer is powered by a reliable, high-quality component that's as resilient as you are. Your laundry routine deserves nothing less than the best.
Related General Electric Dryer Parts
- All General Electric Dryer parts
- General Electric Dryer Bearings
- General Electric Dryer Belts
- General Electric Dryer Brackets and Flanges
- General Electric Dryer Caps and Lids
- General Electric Dryer Circuit Boards and Touch Pads
- General Electric Dryer Dispensers
- General Electric Dryer Doors
- General Electric Dryer Drawers and Glides
- General Electric Dryer Drums and Tubs
- General Electric Dryer Ducts and Vents
- General Electric Dryer Elements and Burners
- General Electric Dryer Fans and Blowers
- General Electric Dryer Fuses
- General Electric Dryer Handles
- General Electric Dryer Hardware
- General Electric Dryer Hinges
- General Electric Dryer Hoses and Tubes
- General Electric Dryer Igniters
- General Electric Dryer Insulations
- General Electric Dryer Knobs
- General Electric Dryer Latches
- General Electric Dryer Legs and Feet
- General Electric Dryer Lights and Bulbs
- General Electric Dryer Manuals and Literatures
- General Electric Dryer Motors
- General Electric Dryer Panels
- General Electric Dryer Power Cords
- General Electric Dryer Pulleys
- General Electric Dryer Seals and Gaskets
- General Electric Dryer Sensors
- General Electric Dryer Springs and Shock Absorbers
- General Electric Dryer Switches
- General Electric Dryer Thermostats
- General Electric Dryer Timers
- General Electric Dryer Trims
- General Electric Dryer Valves
- General Electric Dryer Wheels and Rollers
- General Electric Dryer Wire Plugs and Connectors