General Electric Dryer Brackets and Flanges

Your Price

$19.82

Lint Filter Slide

★★★★★

(13)

PartSelect Number PS11772026

Manufacturer Part Number WE01X25915

This is a replacement lint filter slide for your dryer. It is approximately 14 inches long and 5 inches wide. It is made of white plastic and is sold individually. The slide mounts to your dryer and allows the lint filter to slide out for cleaning. If your lint filter will not slide out properly, you may need to replace the slide. This part is an authentic OEM part sourced directly from the manufacturer.

Your Price

$16.59

Bearing Retainer

PartSelect Number PS266696

Manufacturer Part Number WE1M300

There is a slot in it for a ground strap.

Fixes these symptoms

Noisy
See more...

Installation Instructions

Kerry from New Martinsville, WV

Noisy like a chain rattling inside

Disconnect Power from the Dryer
Remove 2 screws that held the top on the dryer.
Removed the 2 screw that held the front on the dryer.
Unhooked the belt from the tensioner and motor pulley.
Pulled the drum out. Removed the belt.
Removed the three screws that held the bearing assembly
on the back of the drum.
Removed the keeper o-ring slide the bad bearing off of shaft. Slide the new bearing on the shaft put the new o-ring on the shaft. Reassembled the bearing on back of the drum. Put belt back around the drum and put drum back in place. Put The belt around the motor pulley and tensioner
(this is probably the hardest part).
Put the front and top back together.
Turned the power back on. Job done Read more...

Your Price

$18.00

SHAFT & BRACKET Assembly

★★★★★

(1)

PartSelect Number PS2355941

Manufacturer Part Number WE3M33

Your Price

$6.24

HOLDER ELEMENT

PartSelect Number PS284957

Manufacturer Part Number WR02X10518