EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

General Electric Dryer Valves

Popular General Electric Dryer Valves

What this part fixes:
  • Leaking
  • No hot or cold water
  • Water Filling Issues
$18.56
In Stock
This conversion kit changes the dryer from natural gas to liquid propane. Installation instructions are included.
This conversion kit changes the dryer from natural gas to liquid propane. Installation instructions are included.
Installation Instructions
Ricard from Pittsfield, IL
I changed a dryer for natural to Lp gas
I received the part in record time.(2 days) I had a little trouble getting the case off of the dryer, but the part was real easy to install. I have changed these before with another company and their instructins were not good at all. Your instruction were relly easy to understand, step by step.

Thanks
$182.43
In Stock
The burner and gas valve assembly come as a complete assembly with the burner.
The burner and gas valve assembly come as a complete assembly with the burner.
Original Equipment Manufacturer

MAKE THIS REPAIR A GUARANTEED WIN

OVER 2 MILLION PARTS TO ENSURE VICTORY

$50.56
Special Order
This conversion kit changes the dryer from liquid propane to natural gas. Installation instructions are included.
This conversion kit changes the dryer from liquid propane to natural gas. Installation instructions are included.
Installation Instructions
Marcia from Nunda, NY
conversion from LP gas to Natural gas
I bought a natural gas orfice for a dryer that needed to be change from Lp gas. I was able to
change the parts,it was very helpful that there was a drawing in the package showing the
location of the parts that need to be changed. This was a used dryer I purchased and
I did not have an owners manual to refer to.
Everything went very well, Thank you.

Marcia
This 'M' series coil is both a boosting as well as a holding coil. It has three terminals.
This 'M' series coil is both a boosting as well as a holding coil. It has three terminals.
What this part fixes:
  • Not Heating
Installation Instructions
Erik from Newport, ME
Dryer would heat initially, but would not heat throughout entire cycle.
-Removed top panel
-Removed right side panel
-Gas coils were held in together under a metal strap
-Removed 2 screws holding strap
-Unplugged 1 wire harness to each coil
-Removed Primary and Holding coil
-Replace with two new coils, replace strap and plug in each harness
-Replace side, then top panel ... Read more >-Under 1 hour job...Took 45 minutes to remove/replace panels and only 5 minutes to replace coils.
-Anyone with a little mechanical ability can save $150 in labor and spend just $50 in parts to fix this problem.
-Questions: Erik at [email protected]
This part is the replacement main valve coil for your dryer. It is black and white in color and has 2 terminals. It is approximately 1 inch long and 1 inch wide. The main valve coil opens the gas valves while the dryer is running. This coil is used with two coil gas shut off valve assemblies. Be sure to turn off the gas before you begin this repair. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.
This part is the replacement main valve coil for your dryer. It is black and white in color and has 2 terminals. It is approximately 1 inch long and 1 inch wide. The main valve coil opens the gas valves while the dryer is running. This coil is used with two coil gas shut off valve assemblies. Be sure to turn off the gas before you begin this repair. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.
Installation Instructions
Erik from Newport, ME
Dryer would heat initially, but would not heat throughout entire cycle.
-Removed top panel
-Removed right side panel
-Gas coils were held in together under a metal strap
-Removed 2 screws holding strap
-Unplugged 1 wire harness to each coil
-Removed Primary and Holding coil
-Replace with two new coils, replace strap and plug in each harness
-Replace side, then top panel ... Read more >-Under 1 hour job...Took 45 minutes to remove/replace panels and only 5 minutes to replace coils.
-Anyone with a little mechanical ability can save $150 in labor and spend just $50 in parts to fix this problem.
-Questions: Erik at [email protected]
$152.47
In Stock
$61.55
In Stock