Knob, Gray WH01X10462 | Official GE Part | Fast Shipping | PartSelect
Knob, Gray – Part Number: WH01X10462
Knob, Gray – Part Number: WH01X10462 Knob, Gray – Part Number: WH01X10462 https://partselectcom.azureedge.net/Schematics/GE/00123831i01.gif

Knob, Gray

Product Description

Knob, Gray Specifications

This part is a replacement timer knob for your dryer. The knob fits onto a D-shaped shaft. To replace the knob, line up the back opening with the shaft and slide it in place. Make sure the dryer is turned off before beginning this repair.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Timer will not advance, Will Not Start, Shuts off too soon, Will not shut off.

This part works with the following products:

Dryer, Washer.

This part works with the following brands:

General Electric.

Part # WH01X10462 replaces these:

1550693, AP4485269, WH01X10309.
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 15 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Bruce from South San Francisco, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
WH01X10462, WE4M527
Frozen timer
1. Remove three screws from back of dryer
2. Tilt top panel forward and disengage
3. Swapped wiring one by one from old timer to new timer
4. Reinstall

The new timer worked so well that even the old, broken knobs could turn it. But I replaced the knobs anyway.

Customer service was great in helping me verify that this timer would work on this dryer (my model number was not listed on the website).
104 of 120 people found this instruction helpful.
Was this instruction helpful to you?
Gary from Brooklyn, WI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WH01X10462, WE04X20416
Dryer timer operation was restricted causing multiple broken (plastic) knobs.
Turned off the electrical breaker to the dryer.
Removed the three screws holding the control panel. Removed the old knob. Tilted the control panel forward to expose the wiring and controls. Removed the screw holding the old timer and loosened the timer - leaving the wires hooked up. Then I removed one wire at a time and reconnected to the corresponding terminal on the new timer until all of the wires were connected to the new timer. Replaced the timer and re-assembled the control panel on the dryer - turned the electric breaker back on.
76 of 91 people found this instruction helpful.
Was this instruction helpful to you?
Richard from Palmetto Bay, FL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
WH01X10462, WE04X20416
Timer Would Not Turn - Broke Knobs
The hardest part of this repair was determining which parts to buy. The PartSelect website did not list this particular model dryer. But the GE site did. I confirmed that the G2WW and the G3WW models used the same parts on the GE site and then purchased them at the PartSelect site. I saved almost 20% and the parts arrived the next day. The actual repair job was easier than I thought. Replace wire for wire, take the old timer off and snap the new one in place. Works perfectly.
23 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Charles F from Kirkville, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WH01X10462, WE1X980
Could not adjust timer/switch
I had immediately assumed the problem was the timer/switch, P/N WE4M365 and foolishly ordered that part. Should you ever encounter non-adjustment of the timer/switch, try another knob from the console. That was the only problem here as it turns out. Also, the knob DOES come with the "D" shaped insert clip.
20 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thomas from Webster, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
WH01X10462, WE04X20416, WE1X980
Timer bound up, causing the knob to break.
Disassembled back splash to inspect timer. Ordered parts (at a 50% discount from brick and mortar stores). Parts delivered in two days. Installed new timer and had everything back together in 10 minutes. No-brainer!
18 of 31 people found this instruction helpful.
Was this instruction helpful to you?
Joanne from Horseheads, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WH01X10462
The timer dial had cracked, and needed to be replaced
We had been using a pliers to turn the timer dial for way too long. We finally went online to find the replacement dial. Ordered it, received it in 2-3 days, opened the plastic bag, and voila! put it on and now get to use the dryer the way it was intended!!
15 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Marcus from Waukee, IA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WH01X10462
broken knob
Placed new knob over existing stem
14 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Christine from Darien, CT
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WH01X10462
inside assembly on knob broke
Could not turn dryer selection without a pliers. Metal assembly inside knob broke. Easy enough to find knob on website, though the machine was so old the model numbers had changed. Popped off old knob, put new one on; done. Received knob in mail within a couple of days of ordering online. Excellent service. Thank you.
12 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Jaime from CHESAPEAKE, VA
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
WE04X20416, WH01X10462
The knob is worn out
Just remove 3 screws at the back and tilt the panel forward and you got access to the timer control and match the corresponding letters to the wires and that's it done.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
William J from CUMMING, GA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
WH01X10462
Knob broken
Pushed new one on shaft
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
39 Reviews
4.5
out of 5
Filter By Rating:
  • 5 Stars
    31
  • 4 Stars
    4
  • 3 Stars
    0
  • 2 Stars
    1
  • 1 Stars
    3
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS2370714
Manufacturer Part Number: WH01X10462
Brand
Model Number
Description
General Electric
DLLSR40EG0WW
Dryer - Electric
General Electric
DLLSR40EG1WW
Dryer - Electric
General Electric
DLLSR40EG2WW
Dryer - Electric
General Electric
DLLSR40EG3WW
Dryer
General Electric
DLLSR40EG4WW
Dryer
General Electric
DLLSR40EG5WW
Dryer
General Electric
DLLSR40EG6WW
Dryer
General Electric
DLLSR40GG0WW
Dryer - Gas
General Electric
DLLSR40GG1WW
Dryer - Gas
General Electric
DLLSR40GG2WW
Dryer - Gas
General Electric
DLLSR40GG3WW
Dryer
General Electric
DLLSR40GG4WW
Dryer
General Electric
DLLSR40GG5WW
Dryer
General Electric
DLLSR40GG6WW
Dryer
General Electric
DLLSR40GG7WW
Dryer
General Electric
DQSR483EG0WW
Dryer - Electric
General Electric
DQSR483GG0WW
Dryer - Gas
General Electric
DRSR483EG0WW
Dryer - Electric
General Electric
DRSR483EG1WW
Dryer - Electric
General Electric
DRSR483EG2WW
Dryer - Electric
General Electric
DRSR483EG3WW
Dryer
General Electric
DRSR483EG4WW
Dryer
General Electric
DRSR483EG5WW
Dryer
General Electric
DRSR483EG6WW
Dryer
General Electric
DRSR483EG7WW
Dryer
General Electric
DRSR483GG0WW
Dryer - Gas
General Electric
DRSR483GG1WW
Dryer - Gas
General Electric
DRSR483GG2WW
Dryer - Gas
General Electric
DRSR483GG3WW
Dryer
General Electric
DRSR483GG4WW
Dryer