Maytag Washer Sensors

Videos!

Your Price

$38.96

Maytag Washer Sensor

★★★★★

10 Reviews

PartSelect Number PS11749664

Manufacturer Part Number WPW10178988

This rotary position sensor is a genuine OEM part for your washing machine. It helps to ensure the load of clothing stays balanced during the wash cycle. Customers have rated this repair as easy. To complete this repair, you will need an Allen wrench, 3/8 inch socket, and a screwdriver. The repair will involved turning off the power and water supply, and tilting the washer on its front to access the sensor.

Fixes these symptoms

Spinning Issues
Will not agitate
Will Not Start
See more...

Installation Instructions

Edgardo from SALEM, OR

F51 error code

Pretty easy! Just follow this link on how to fix the problem:

https://www.youtube.com/watch?v=_-Hg8rLGiKQ

The hardest part on fixing this is trying to move the washer out of its place so I can tilt it to see underneath the washer where the repair would be. Read more...

Videos!

Your Price

$77.99

Maytag Washer Water Inlet Flowmeter

★★★★★

10 Reviews

PartSelect Number PS11748313

Manufacturer Part Number WPW10110225

This part continually measures the amount of water entering the tub. It will make adjustments if too much or too little water is present.

Fixes these symptoms

Leaking
No hot or cold water
Water Filling Issues
See more...

Installation Instructions

Jerry from Keenes, IL

washing machine giving f20 error code

removed washer top, checked supply hoses and inlet valve to make sure not clogged, replaced valve and while already there replaced flowmeter, reinstall top and hoses and checked machine operation, machine working fine and wife thinks i am her hero Read more...

Videos!

Your Price

$34.74

Maytag Washer Temperature Sensor

★★★★★

6 Reviews

PartSelect Number PS11755214

Manufacturer Part Number WPW10467289

This part regulates the temperature of the water in the tub. The sensor is located in the heating element.

Fixes these symptoms

No hot or cold water
Will not drain
Will Not Start
See more...

Installation Instructions

william from VIRGINIA BCH, VA

Replacing the heat sensor following an F-24 Error Notice.

I followed your repair video explicitly, simple fix. However, one should
be careful when disconnecting the two prong electrical connector from
the heat sensor. the two black wires can pull free easily. In that case, the
rear of the female plastic wired connector must be extracted to allow the two black wires to be "pushed" into the narrow slot which displaces the
wire insulation and allows for a good electrical connection. If a punch tool is not available a pair of needle nose pliers works. Also, observe
the orientation slots on both the male andfemale connectors - they
connect one way only! I set the washer on it's face while effecting this
repair to better see what I was doing (eyesight not as good as it used to be). Thanks for the timely support! Read more...

Your Price

$64.69

Maytag Washer Sensor

★★★★★

1 Review

PartSelect Number PS11751018

Manufacturer Part Number WPW10247389

Introducing the genuine OEM Sensor from Whirlpool, designed for optimal performance in select models of Whirlpool, KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef appliances. This sensor is specifically crafted to monitor coins inserted into the coin box of commercial laundry machines, ensuring accurate operation. Do remember that while parts may share similar appearance, variations in size and shape can occur. Therefore, ensure you have the correct part number for your specific appliance model before order placement. Prior to installation, ensure to unplug the appliance and wear work gloves for enhanced safety. Trust Whirlpool for components that are both functional and durable.

Your Price

$50.56

Maytag Washer Sensor

PartSelect Number PS11731237

Manufacturer Part Number W10853313

This moisture sensor helps your dryer detect when clothes are still damp so it can adjust the cycle for efficient, even drying. It’s a simple replacement when your dryer is taking too long, not drying well, or stopping too early. Made to match the original fit on select models, it installs on the rear interior panel and helps restore accurate drying performance.

Your Price

$53.20

Maytag Washer Sensor

PartSelect Number PS12349236

Manufacturer Part Number W11208385

This washer temperature sensor monitors the water temperature inside the tub to help the machine heat and wash properly. When it fails, the washer may stay in cold-water cycles, display error codes, or have trouble advancing through a cycle. Replacing this sensor restores accurate temperature control and helps the washer run as intended. Be sure to check that it matches your specific model before purchasing.