EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
Back
Back
Back
Keep typing for more specific results...
Keep typing for more specific results...

Maytag Washer Latches

Popular Maytag Washer Latches

Your Price
$21.45
  In Stock
Maytag Washer Door Strike
★★★★★
★★★★★
25 Reviews
PartSelect Number PS16218028
Manufacturer Part Number W11457841
This door strike is an authentic OEM replacement part that is compatible with various models of top-load washing machines. The door strike is located along the door frame, where it engages with the latch when the door is closed. It keeps the door securely shut so that the washer can start and prevents it from swinging open while the washer is running. It is a safety mechanism that prevents water leakage, injuries, and damage to the washer. If the door strike is damaged or worn down, it may be unable to lock the door properly and the washer may stop mid-cycle or fail to start altogether. Replace the door strike promptly to ensure the proper functioning of your washer.
Fixes these symptoms
  • Lid or door won’t close
  • Locking Issues
  • Will Not Start
  • See more...
Installation Instructions
John from AURORA, CO
Tab on door strike got broken off and washer would not operate without it.
Pushed in on door strike and rotated it counterclockwise, removed broken strike and installed new strike. NOTE: when removing the old strike (turning counterclockwise) it felt like it might break and/or was attached with an screw that I didn't see but it came right out. Read more...
Your Price
$22.52
  In Stock
Maytag Washer Catch
★★★★★
★★★★★
24 Reviews
PartSelect Number PS12745673
Manufacturer Part Number W11429587
This door catch Is an authentic OEM replacement part that is designed to fit with dryers. It is responsible for keeping the dryer door securely closed while it is running. When the door is closed, the catch engages with the door strike and snaps into place, holding the door shut until the drying cycle is completed. Over time the catch may become corroded, worn down, or damaged, or dislodged from frequent use and hard impact. If the catch is faulty, the door may be unable to remain shut. This can lead to heat loss, injury, and potential damage to the dryer itself. If the catch is no longer functional, it is recommended to replace it as soon as possible and avoid using your dryer until the repair is complete.
Fixes these symptoms
Installation Instructions
Preston from ETNA, OH
Broken dryer door catch
Used the screwdriver pressed the blade against the edge of the door catch and popped it out. Put the new door catch in place and pressed it and it snapped into place. Done Read more...
Your Price
$49.75
  In Stock
Maytag Washer Latch
★★★★★
★★★★★
3 Reviews
PartSelect Number PS17217010
Manufacturer Part Number W11700916
This washer lid lock assembly is designed for top-load washing machines and ensures the lid remains securely closed during wash and spin cycles. It replaces worn or malfunctioning latches, helping prevent the machine from starting or pausing when the lid isn’t properly shut. The assembly includes the solenoid mechanism that engages the lock, contributing to safe and efficient operation. Compatible with a wide range of models, it’s an ideal solution for restoring reliable performance to your appliance.
Fixes these symptoms
  • Lid or door won’t close
  • Locking Issues
  • Will Not Start
  • See more...
Installation Instructions
David from MOUNT CALM, TX
The lid was closed to hard causing the door strike, lid lock bezel and assembly to break.
Changing the door strike was simple just a quarter turn and it pops off. Changing the assembly, remove the screws from the back side at the top, move to facing the front of the machine pull the top toward you about a half inch and it will open. From the back unplug the correct wire, remove assembly and then install in reverse. Good luck. Read more...
Your Price
$102.77
  In Stock
Maytag Washer Washing Machine Door Lock Assembly
★★★★★
★★★★★
30 Reviews
PartSelect Number PS12704713
Manufacturer Part Number W11307244
This is lid lock designed for use within various washing machines. This lid lock, also known as a latch assembly, is used to secure the lid of your washing machine during the washing cycle. If your washing machine is experiencing issues starting or if the lid is not securing, this lid lock assembly likely needs to be replaced. This lid lock attaches underneath the top portion of your washer and its wire harness connects to the rear of the appliance. To replace this assembly, you will need a screwdriver, flathead screwdriver or putty knife, and wrench. This lid lock is an OEM part that is sold individually and does not come with any other parts or accessories.
Fixes these symptoms
  • Cycle Not Advancing
  • Lid or door won’t close
  • Locking Issues
  • See more...
Installation Instructions
John from BEAVER DAMS, NY
latch switch was not working
unfasten top from back, slide top forward and lift up, remove switch and cable (one piece), in stall new switch and cable, put top down and slide back, reinstall screws. Read more...
Your Price
$80.82
  In Stock
Maytag Washer Lid Lock Assembly
★★★★★
★★★★★
22 Reviews
PartSelect Number PS11722981
Manufacturer Part Number W10810403
This lid lock assembly is supplied by the original manufacturer for use in various models of top-load washing machines. The assembly includes the lid lock mechanism and the wiring harness. You can find it positioned on the underside of the washer lid. The lid lock assembly is designed to prevent the washer lid from opening during use. This is a safety mechanism that ensures that users do not accidentally come in contact with moving parts or are not injured by spilled water or detergent. If the lid lock assembly is faulty, the washer may be unable to start the cycle or it may stop in the middle of a cycle.
Fixes these symptoms
  • Lid or door won’t close
  • Locking Issues
  • Will Not Start
  • See more...
Installation Instructions
Patricia R from BROOKHAVEN, MS
Lid would not lock, therefore, washer would not start.
I watched a YouTube video first. Followed instructions exactly and had washer going in 30 minutes!!!! Part that I ordered was an exact fit! Thanks to partselect.com! Read more...
Your Price
$21.45
  In Stock
Maytag Washer Strike
★★★★★
★★★★★
6 Reviews
PartSelect Number PS11726338
Manufacturer Part Number W10837741
This is a lid strike for various models of top-load washing machines. Lid strikes are designed to engage with the lid switch and communicate to the control board that the washer can start. If your washing machine is having issues starting, or if the lid strike for your washer is visibly damaged it will need to be replaced. Replacing this washing machine lid strike is simple and only requires a screwdriver. This lid strike is made almost entirely of durable white plastic and features two holes on either side for securing with screws. This lid strike is an OEM part and is not sold with any other parts or accessories, such as the necessary screws.
Fixes these symptoms
  • Cycle Not Advancing
  • Lid or door won’t close
  • Locking Issues
  • See more...
Installation Instructions
Terry from KEYSTONE, IN
wanting to see this new energy efficient washer work, with the lid open
There are a lot of complaints, with these new energy efficient washers, no matter the brand, on the amount of water that is being used, and not properly washing your cloths, while in the wash cycle.
I got this new MayTag washer, and wanted to see it work, for myself, so I can try to correct the problem. But in order to see it work, and fill, the lid has to be open, to observe it working.
To do so, there is a part connected to the lid, called a "STRIKE", that when the lid is down, it activates the electronics, making the washer run.
So, I purchased this strike, to insert it in the washer, so I can observe the washer running, while the lid is open. Very easy, no tools required, just stick it in the slot, where the strike, on the lid goes, when the lid is closed.
Read more...
Your Price
$50.56
  In Stock
Maytag Washer Lid Latch Assembly
★★★★★
★★★★★
39 Reviews
PartSelect Number PS3497627
Manufacturer Part Number W10404050
This washer lid switch is a critical safety component designed to halt the spinning motion of the tub when the lid is opened. Its primary function is to prevent accidental contact with moving parts during operation, reducing the risk of injury. The switch activates automatically, interrupting the spin cycle as soon as the lid is lifted. If the switch becomes faulty, the washer may not spin or may continue spinning with the lid open, posing a safety hazard. Replacement is recommended if the switch is damaged or no longer functioning properly.
Fixes these symptoms
  • Cycle Not Advancing
  • Lid or door won’t close
  • Locking Issues
  • See more...
Installation Instructions
William from Wakefield, RI
Defective lid latch - Cabrio Washer
The instructions that came with the part were worthless. Essentially, unplug, put in new part, plug it back in. I spent a considerable amount of time on the internet and finally found a video showing how to open the top. Unlike other models, it is held down by clamps in the back rather than clips in the front. Once finding this information the installation was simple. Remove the clamps and the back of the console, slide the top forward and lift, remove and replace the lock and reassemble. You don't even have to remove the hoses. Read more...
Your Price
$10.70
  In Stock
Maytag Washer Door Strike/hook
★★★★★
★★★★★
15 Reviews
PartSelect Number PS11746261
Manufacturer Part Number WP8540221
Used to help make the door stay closed. Sold individually.
Fixes these symptoms
  • Door won’t close
  • Leaking
  • Lid or door won’t close
  • See more...
Installation Instructions
david from st petersburg, FL
the strike hook was broken
replacing the hook was simple 2 torx screws. the latch assembly seemed ok I could hear it trying to latch the hook so i just replace the broken hook. Read more...
Your Price
$10.70
  In Stock
Maytag Washer Strike
★★★★★
★★★★★
1 Review
PartSelect Number PS16543459
Manufacturer Part Number W11513250
This strike component helps secure your appliance door in place, ensuring proper closure and safe operation. Made from durable materials, it provides a reliable fit and long-lasting performance.
Fixes these symptoms
  • Lid or door won’t close
  • Locking Issues
  • Will Not Start
  • See more...
Your Price
$55.29
  In Stock
Maytag Washer Lid Lock
★★★★★
★★★★★
1 Review
PartSelect Number PS17215992
Manufacturer Part Number W11670519
If your washer won’t start or keeps clicking, this lid lock might be the problem. It keeps the lid shut during cycles to prevent spills and keep things safe. Made to fit Whirlpool and related brands, it’s easy to install and built to last.
Fixes these symptoms
  • Lid or door won’t close
  • Locking Issues
  • Will Not Start
  • See more...

Related Maytag Washer Parts